Re: [PATCH 2/2] dt-bindings: power: add bindings for sbs-charger

From: Sebastian Reichel
Date: Wed Nov 23 2016 - 08:45:33 EST


Hi,

On Wed, Nov 23, 2016 at 12:20:44PM +0100, Nicolas Saenz Julienne wrote:
> Adds device tree documentation for SBS charger compilant devices as defined
> here: http://sbs-forum.org/specs/sbc110.pdf
>
> Signed-off-by: Nicolas Saenz Julienne <nicolas.saenz@xxxxxxxxxx>
> ---
> .../bindings/power/supply/sbs_sbs-charger.txt | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
>
> diff --git a/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> new file mode 100644
> index 0000000..b18ee2a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/sbs_sbs-charger.txt
> @@ -0,0 +1,22 @@
> +SBS sbs-charger
> +~~~~~~~~~~
> +
> +Required properties :
> + - compatible : "sbs,sbs-charger"

I think the binding should request to add a more specific compatible
value and use "sbs,sbs-charger" as fallback. The sbs-charger spec
provides a few vendor specific registers. Like this:

compatible = "lltc,ltc4100", "sbs,sbs-charger"

> +Optional properties :
> +- interrupt-parent: Should be the phandle for the interrupt controller. Use in
> + conjunction with "interrupts".
> +- interrupts: Interrupt mapping for GPIO IRQ. Use in conjunction with
> + "interrupt-parent". If an interrupt is not provided the driver will switch
> + automatically to polling.
> +
> +Example:
> +
> + ltc4100@9 {
> + compatible = "sbs,sbs-charger";
> + reg = <0x9>;
> + interrupt-parent = <&gpio6>;
> + interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> + };
> +

-- Sebastian

Attachment: signature.asc
Description: PGP signature