[PATCH v3 3/7] PWM: add pwm-stm32 DT bindings

From: Benjamin Gaignard
Date: Fri Dec 02 2016 - 05:18:26 EST


Define bindings for pwm-stm32

version 2:
- use parameters instead of compatible of handle the hardware configuration

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
---
.../devicetree/bindings/pwm/pwm-stm32.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/pwm-stm32.txt

diff --git a/Documentation/devicetree/bindings/pwm/pwm-stm32.txt b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
new file mode 100644
index 0000000..575b9fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/pwm-stm32.txt
@@ -0,0 +1,38 @@
+STMicroelectronics PWM driver bindings for STM32
+
+Must be a sub-node of STM32 general purpose timer driver
+Parent node properties are describe in ../mfd/stm32-general-purpose-timer.txt
+
+Required parameters:
+- compatible: Must be "st,stm32-pwm"
+- pinctrl-names: Set to "default".
+- pinctrl-0: List of phandles pointing to pin configuration nodes
+ for PWM module.
+ For Pinctrl properties, please refer to [1].
+
+Optional parameters:
+- st,breakinput: Set if the hardware have break input capabilities
+- st,breakinput-polarity: Set break input polarity. Default is 0
+ The value define the active polarity:
+ - 0 (active LOW)
+ - 1 (active HIGH)
+- st,pwm-num-chan: Number of available PWM channels. Default is 0.
+- st,32bits-counter: Set if the hardware have a 32 bits counter
+- st,complementary: Set if the hardware have complementary output channels
+
+[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Example:
+ gptimer1: gptimer1@40010000 {
+ compatible = "st,stm32-gptimer";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc 0 160>;
+ clock-names = "clk_int";
+
+ pwm1@0 {
+ compatible = "st,stm32-pwm";
+ st,pwm-num-chan = <4>;
+ st,breakinput;
+ st,complementary;
+ };
+ };
--
1.9.1