Re: [PATCH 2/2] HID: i2c-hid: support regulator power on/off

From: Dmitry Torokhov
Date: Fri Dec 02 2016 - 18:00:22 EST


On Fri, Dec 02, 2016 at 02:19:00PM -0800, Brian Norris wrote:
> On some boards, we need to enable a regulator before using the HID, and
> it's also nice to save power in suspend by disabling it. Support an
> optional "vdd-supply" and a companion initialization delay.
>
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
> Cc: Jiri Kosina <jikos@xxxxxxxxxx>
> Cc: linux-input@xxxxxxxxxxxxxxx
> ---
> v2:
> * support compatible property for wacom, with specific "vdd-supply"
> * name
> * support the 100ms delay needed for this digitizer
> * target regulator support only at specific device
>
> v3:
> * drop Wacom specifics and allow this to be used generically
> * add "init-delay-ms" property support
>
> v4:
> * use devm_regulator_get() (with a 'dummy' regulator for most cases)
> instead of _optional() version, to make code less conditional (Dmitry)
> * fix but where 'init_delay_ms' wasn't getting assigned properly
> * disable regulator in probe() failure path
> ---
> drivers/hid/i2c-hid/i2c-hid.c | 44 +++++++++++++++++++++++++++++++++++++++++--
> include/linux/i2c/i2c-hid.h | 6 ++++++
> 2 files changed, 48 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
> index b3ec4f2de875..5c6e037613d7 100644
> --- a/drivers/hid/i2c-hid/i2c-hid.c
> +++ b/drivers/hid/i2c-hid/i2c-hid.c
> @@ -38,6 +38,7 @@
> #include <linux/acpi.h>
> #include <linux/of.h>
> #include <linux/gpio/consumer.h>
> +#include <linux/regulator/consumer.h>
>
> #include <linux/i2c/i2c-hid.h>
>
> @@ -937,6 +938,10 @@ static int i2c_hid_of_probe(struct i2c_client *client,
> }
> pdata->hid_descriptor_address = val;
>
> + ret = of_property_read_u32(dev->of_node, "init-delay-ms", &val);
> + if (!ret)
> + pdata->init_delay_ms = val;
> +
> return 0;
> }
>
> @@ -983,6 +988,15 @@ static int i2c_hid_probe(struct i2c_client *client,
> ihid->pdata = *platform_data;
> }
>
> + ihid->pdata.supply = devm_regulator_get(&client->dev, "vdd");

Oh, haveni't noticed that the rest of the driver does not use devm.
Well, I'll leave it up to hid-i2c folks to decide if they are OK with
mixing up the managed and non-managed resources, it seems safe to me in
this case.

Reviewed-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Thanks.

--
Dmitry