[PATCH 1/3] staging: comedi: cb_pcidas64: use preferred kernel type u8
From: Saber Rezvani
Date: Fri Dec 16 2016 - 14:16:40 EST
Fix the checkpatch.pl issue:
CHECK: Prefer kernel type 'u8' over 'uint8_t'
Signed-off-by: Saber Rezvani <irsaber@xxxxxxxxx>
---
drivers/staging/comedi/drivers/cb_pcidas64.c | 46 ++++++++++++++--------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index cb9c269..55e84d0 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -418,12 +418,12 @@ enum range_cal_i2c_contents {
BNC_TRIG_THRESHOLD_0V_BIT = 0x80,
};
-static inline uint8_t adc_src_4020_bits(unsigned int source)
+static inline u8 adc_src_4020_bits(unsigned int source)
{
return (source << 4) & ADC_SRC_4020_MASK;
};
-static inline uint8_t attenuate_bit(unsigned int channel)
+static inline u8 attenuate_bit(unsigned int channel)
{
/* attenuate channel (+-5V input range) */
return 1 << (channel & 0x3);
@@ -443,7 +443,7 @@ static const struct comedi_lrange ai_ranges_64xx = {
}
};
-static const uint8_t ai_range_code_64xx[8] = {
+static const u8 ai_range_code_64xx[8] = {
0x0, 0x1, 0x2, 0x3, /* bipolar 10, 5, 2,5, 1.25 */
0x8, 0x9, 0xa, 0xb /* unipolar 10, 5, 2.5, 1.25 */
};
@@ -461,7 +461,7 @@ static const struct comedi_lrange ai_ranges_64_mx = {
}
};
-static const uint8_t ai_range_code_64_mx[7] = {
+static const u8 ai_range_code_64_mx[7] = {
0x0, 0x1, 0x2, 0x3, /* bipolar 5, 2.5, 1.25, 0.625 */
0x9, 0xa, 0xb /* unipolar 5, 2.5, 1.25 */
};
@@ -476,7 +476,7 @@ static const struct comedi_lrange ai_ranges_60xx = {
}
};
-static const uint8_t ai_range_code_60xx[4] = {
+static const u8 ai_range_code_60xx[4] = {
0x0, 0x1, 0x4, 0x7 /* bipolar 10, 5, 0.5, 0.05 */
};
@@ -500,7 +500,7 @@ static const struct comedi_lrange ai_ranges_6030 = {
}
};
-static const uint8_t ai_range_code_6030[14] = {
+static const u8 ai_range_code_6030[14] = {
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, /* bip 10, 5, 2, 1, 0.5, 0.2, 0.1 */
0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf /* uni 10, 5, 2, 1, 0.5, 0.2, 0.1 */
};
@@ -526,7 +526,7 @@ static const struct comedi_lrange ai_ranges_6052 = {
}
};
-static const uint8_t ai_range_code_6052[15] = {
+static const u8 ai_range_code_6052[15] = {
0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, /* bipolar 10 ... 0.05 */
0x9, 0xa, 0xb, 0xc, 0xd, 0xe, 0xf /* unipolar 10 ... 0.1 */
};
@@ -634,7 +634,7 @@ struct pcidas64_board {
int ai_bits; /* analog input resolution */
int ai_speed; /* fastest conversion period in ns */
const struct comedi_lrange *ai_range_table;
- const uint8_t *ai_range_code;
+ const u8 *ai_range_code;
int ao_nchan; /* number of analog out channels */
int ao_bits; /* analog output resolution */
int ao_scan_speed; /* analog output scan speed */
@@ -1175,7 +1175,7 @@ struct pcidas64_private {
/* index of calibration source readable through ai ch0 */
int calibration_source;
/* bits written to i2c calibration/range register */
- uint8_t i2c_cal_range_bits;
+ u8 i2c_cal_range_bits;
/* configure digital triggers to trigger on falling edge */
unsigned int ext_trig_falling;
short ai_cmd_running;
@@ -1657,9 +1657,9 @@ static void i2c_set_scl(struct comedi_device *dev, int state)
}
}
-static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
+static void i2c_write_byte(struct comedi_device *dev, u8 byte)
{
- uint8_t bit;
+ u8 bit;
unsigned int num_bits = 8;
for (bit = 1 << (num_bits - 1); bit; bit >>= 1) {
@@ -1700,11 +1700,11 @@ static void i2c_stop(struct comedi_device *dev)
}
static void i2c_write(struct comedi_device *dev, unsigned int address,
- const uint8_t *data, unsigned int length)
+ const u8 *data, unsigned int length)
{
struct pcidas64_private *devpriv = dev->private;
unsigned int i;
- uint8_t bitstream;
+ u8 bitstream;
static const int read_bit = 0x1;
/*
@@ -1831,7 +1831,7 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
/* set start channel, and rest of settings */
writew(bits, devpriv->main_iobase + ADC_QUEUE_LOAD_REG);
} else {
- uint8_t old_cal_range_bits = devpriv->i2c_cal_range_bits;
+ u8 old_cal_range_bits = devpriv->i2c_cal_range_bits;
devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
if (insn->chanspec & CR_ALT_SOURCE) {
@@ -1850,7 +1850,7 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
* as it is very slow
*/
if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
- uint8_t i2c_data = devpriv->i2c_cal_range_bits;
+ u8 i2c_data = devpriv->i2c_cal_range_bits;
i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
sizeof(i2c_data));
@@ -2529,7 +2529,7 @@ static int setup_channel_queue(struct comedi_device *dev,
* as it is very slow
*/
if (old_cal_range_bits != devpriv->i2c_cal_range_bits) {
- uint8_t i2c_data = devpriv->i2c_cal_range_bits;
+ u8 i2c_data = devpriv->i2c_cal_range_bits;
i2c_write(dev, RANGE_CAL_I2C_ADDR, &i2c_data,
sizeof(i2c_data));
@@ -2831,7 +2831,7 @@ static void handle_ai_interrupt(struct comedi_device *dev,
struct comedi_subdevice *s = dev->read_subdev;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
- uint8_t dma1_status;
+ u8 dma1_status;
unsigned long flags;
/* check for fifo overrun */
@@ -3008,7 +3008,7 @@ static void handle_ao_interrupt(struct comedi_device *dev,
struct comedi_subdevice *s = dev->write_subdev;
struct comedi_async *async;
struct comedi_cmd *cmd;
- uint8_t dma0_status;
+ u8 dma0_status;
unsigned long flags;
/* board might not support ao, in which case write_subdev is NULL */
@@ -3523,7 +3523,7 @@ static int dio_60xx_wbits(struct comedi_device *dev,
*/
static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
- uint8_t value)
+ u8 value)
{
struct pcidas64_private *devpriv = dev->private;
static const int num_caldac_channels = 8;
@@ -3558,8 +3558,8 @@ static int caldac_8800_write(struct comedi_device *dev, unsigned int address,
static int caldac_i2c_write(struct comedi_device *dev,
unsigned int caldac_channel, unsigned int value)
{
- uint8_t serial_bytes[3];
- uint8_t i2c_addr;
+ u8 serial_bytes[3];
+ u8 i2c_addr;
enum pointer_bits {
/* manual has gain and offset bits switched */
OFFSET_0_2 = 0x1,
@@ -3708,7 +3708,7 @@ static int cb_pcidas64_ad8402_insn_write(struct comedi_device *dev,
return insn->n;
}
-static uint16_t read_eeprom(struct comedi_device *dev, uint8_t address)
+static uint16_t read_eeprom(struct comedi_device *dev, u8 address)
{
struct pcidas64_private *devpriv = dev->private;
static const int bitstream_length = 11;
@@ -3813,7 +3813,7 @@ static int setup_subdevices(struct comedi_device *dev)
s->do_cmdtest = ai_cmdtest;
s->cancel = ai_cancel;
if (board->layout == LAYOUT_4020) {
- uint8_t data;
+ u8 data;
/*
* set adc to read from inputs
* (not internal calibration sources)
--
2.7.4