Re: [PATCH 2/2] ASoC: Intel: boards: Add Baytrail RT5660 machine driver

[Mark Brown]

On Mon, Dec 19, 2016 at 09:51:47PM +0800, Shrirang Bagul wrote:

> +
> +#define DEBUG

This should be production code...

> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/acpi.h>
> +#include <linux/device.h>
> +#include <linux/dmi.h>
> +#include <linux/slab.h>
> +#include <asm/cpu_device_id.h>
> +#include <asm/platform_sst_audio.h>
> +#include <linux/clk.h>

The ordering of the headers is very random here, and is there a matching
platform patch somewhere registering clocks?

> +		/*
> +		 * Set codec clock source to internal clock before
> +		 * turning off the platform clock. Codec needs clock
> +		 * for Jack detection and button press
> +		 */
> +		ret = snd_soc_dai_set_sysclk(codec_dai, RT5660_SCLK_S_RCCLK,
> +					     0,
> +					     SND_SOC_CLOCK_IN);
> +		if (!ret) {
> +			if ((byt_rt5660_quirk & BYT_RT5660_MCLK_EN) && priv->mclk)
> +				clk_disable_unprepare(priv->mclk);
> +		}

Please write the error handling normally and don't embed the next steps
of the process in where the error handling would usually be.

> +	ret = snd_soc_add_card_controls(card, byt_rt5660_controls,
> +					ARRAY_SIZE(byt_rt5660_controls));
> +	if (ret) {
> +		dev_err(card->dev, "unable to add card controls\n");
> +		return ret;
> +	}

Why not initialize these from the card struct?

> +	if ((byt_rt5660_quirk & BYT_RT5660_MCLK_EN) && priv->mclk) {
> +		/*
> +		 * The firmware might enable the clock at
> +		 * boot (this information may or may not
> +		 * be reflected in the enable clock register).
> +		 * To change the rate we must disable the clock
> +		 * first to cover these cases. Due to common
> +		 * clock framework restrictions that do not allow
> +		 * to disable a clock that has not been enabled,
> +		 * we need to enable the clock first.
> +		 */
> +		ret = clk_prepare_enable(priv->mclk);
> +		if (!ret)
> +			clk_disable_unprepare(priv->mclk);

We don't disable the clock after (apparently) temporarily enabling it
here.

> +		/*
> +		 * Default mode for SSP configuration is TDM 4 slot, override config
> +		 * with explicit setting to I2S 2ch 16-bit. The word length is set with
> +		 * dai_set_tdm_slot() since there is no other API exposed
> +		 */
> +		ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
> +					SND_SOC_DAIFMT_I2S     |
> +					SND_SOC_DAIFMT_NB_IF   |
> +					SND_SOC_DAIFMT_CBS_CFS
> +			);

Please use a normal kernel coding style and please initialize this from
the dai_link too, it's always the same.

> +	/* fixup codec name based on HID */
> +	i2c_name = sst_acpi_find_name_from_hid(mach->id);
> +	if (i2c_name != NULL) {
> +		snprintf(byt_rt5660_codec_name, sizeof(byt_rt5660_codec_name),
> +			"%s%s", "i2c-", i2c_name);

There's no point in formatting a static string in here, just include it
in the string.

Attachment: signature.asc
Description: PGP signature