Re: [2/3] serial: 8250: Add new port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx

[Franklin S Cooper Jr]

On 12/22/2016 09:21 AM, Franklin S Cooper Jr wrote:
> 
> 
> On 12/20/2016 02:23 PM, David Lechner wrote:
>> This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx. These


Keystone SoCs also require this PWREMU_MGMT register to be configured.
So it would be nice to update this commit message to include Keystone SoCs.

>> SoCs have standard 8250 registers plus some extra non-standard registers.
>>
>> The UART will not function unless the non-standard Power and Emulation
>> Management Register (PWREMU_MGMT) is configured correctly. This is
>> currently handled in arch/arm/mach-davinci/serial.c for non-device-tree
>> boards. Making this part of the UART driver will allow UART to work on
>> device-tree boards as well and the mach code can eventually be removed.
>>
>> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
>> ---
>>  drivers/tty/serial/8250/8250_of.c   |  1 +
>>  drivers/tty/serial/8250/8250_port.c | 22 ++++++++++++++++++++++
>>  include/uapi/linux/serial_core.h    |  3 ++-
>>  include/uapi/linux/serial_reg.h     |  8 ++++++++
>>  4 files changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
>> index d25ab1c..5281252 100644
>> --- a/drivers/tty/serial/8250/8250_of.c
>> +++ b/drivers/tty/serial/8250/8250_of.c
>> @@ -332,6 +332,7 @@ static const struct of_device_id of_platform_serial_table[] = {
>>  		.data = (void *)PORT_ALTR_16550_F128, },
>>  	{ .compatible = "mrvl,mmp-uart",
>>  		.data = (void *)PORT_XSCALE, },
>> +	{ .compatible = "ti,da830-uart", .data = (void *)PORT_DA830, },
>>  	{ /* end of list */ },
>>  };
>>  MODULE_DEVICE_TABLE(of, of_platform_serial_table);
>> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
>> index fe4399b..ea854054 100644
>> --- a/drivers/tty/serial/8250/8250_port.c
>> +++ b/drivers/tty/serial/8250/8250_port.c
>> @@ -273,6 +273,15 @@ static const struct serial8250_config uart_config[] = {
>>  		.rxtrig_bytes	= {1, 4, 8, 14},
>>  		.flags		= UART_CAP_FIFO,
>>  	},
>> +	[PORT_DA830] = {
>> +		.name		= "TI DA8xx/OMAPL13x/AM17xx/AM18xx",
>> +		.fifo_size	= 16,
>> +		.tx_loadsz	= 16,
>> +		.fcr		= UART_FCR_DMA_SELECT | UART_FCR_ENABLE_FIFO |
>> +				  UART_FCR_R_TRIG_10,
>> +		.rxtrig_bytes	= {1, 4, 8, 14},
>> +		.flags		= UART_CAP_FIFO | UART_CAP_AFE,
>> +	},
>>  };
> 
> 
> Any reason why the fcr and flags fields are changed when compared
> against PORT_16550A?
>>  
>>  /* Uart divisor latch read */
>> @@ -2118,6 +2127,19 @@ int serial8250_do_startup(struct uart_port *port)
>>  		serial_port_out(port, UART_LCR, 0);
>>  	}
>>  
>> +	if (port->type == PORT_DA830) {
>> +		/* Reset the port */
>> +		serial_port_out(port, UART_IER, 0);
>> +		serial_port_out(port, UART_DA830_PWREMU_MGMT, 0);
>> +		mdelay(10);
>> +
>> +		/* Enable Tx, Rx and free run mode */
>> +		serial_port_out(port, UART_DA830_PWREMU_MGMT,
>> +				UART_DA830_PWREMU_MGMT_UTRST |
>> +				UART_DA830_PWREMU_MGMT_URRST |
>> +				UART_DA830_PWREMU_MGMT_FREE);
>> +	}
>> +
>>  #ifdef CONFIG_SERIAL_8250_RSA
>>  	/*
>>  	 * If this is an RSA port, see if we can kick it up to the
>> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
>> index 99dbed8..a126d05 100644
>> --- a/include/uapi/linux/serial_core.h
>> +++ b/include/uapi/linux/serial_core.h
>> @@ -56,7 +56,8 @@
>>  #define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
>>  #define PORT_RT2880	29	/* Ralink RT2880 internal UART */
>>  #define PORT_16550A_FSL64 30	/* Freescale 16550 UART with 64 FIFOs */
>> -#define PORT_MAX_8250	30	/* max port ID */
>> +#define PORT_DA830	31	/* TI DA8xx/OMAP13x/AM17xx/AM18xx */
>> +#define PORT_MAX_8250	31	/* max port ID */
>>  
>>  /*
>>   * ARM specific type numbers.  These are not currently guaranteed
>> diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
>> index b4c0484..0e72eeb 100644
>> --- a/include/uapi/linux/serial_reg.h
>> +++ b/include/uapi/linux/serial_reg.h
>> @@ -327,6 +327,14 @@
>>  #define SERIAL_RSA_BAUD_BASE (921600)
>>  #define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
>>  
>> +/* Extra registers for TI DA8xx/OMAP13x/AM17xx/AM18xx */
>> +#define UART_DA830_PWREMU_MGMT	12
>> +
>> +/* PWREMU_MGMT register bits */
>> +#define UART_DA830_PWREMU_MGMT_FREE	(1 << 0)  /* Free-running mode */
>> +#define UART_DA830_PWREMU_MGMT_URRST	(1 << 13) /* Receiver reset/enable */
>> +#define UART_DA830_PWREMU_MGMT_UTRST	(1 << 14) /* Transmitter reset/enable */
>> +
>>  /*
>>   * Extra serial register definitions for the internal UARTs
>>   * in TI OMAP processors.
>>