Re: [PATCH v8 3/8] drivers:input:tsc2007: add iio interface to read external ADC input and temperature

From: Jonathan Cameron
Date: Fri Dec 30 2016 - 15:18:06 EST


On 28/12/16 14:52, H. Nikolaus Schaller wrote:
> Hi Dmitry,
>
>> Am 27.12.2016 um 22:54 schrieb Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>:
>>
>> On Mon, Dec 12, 2016 at 10:21:25PM +0100, H. Nikolaus Schaller wrote:
>>> Hi,
>>>
>>>
>>>> Am 27.11.2016 um 16:47 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>:
>>>>
>>>> Hi Jonathan,
>>>>
>>>>> Am 27.11.2016 um 12:02 schrieb Jonathan Cameron <jic23@xxxxxxxxxx>:
>>>>>
>>>>> On 24/11/16 18:05, H. Nikolaus Schaller wrote:
>>>>>>
>>>>>>> Am 24.11.2016 um 18:38 schrieb Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 22 November 2016 14:02:30 GMT+00:00, "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx> wrote:
>>>
>>>>
>>>>> - hence cc'd Yann and the Kbuild list
>>>>> to see if they can offer some advices.
>>>
>>> no response / advice so far.
>>
>> Since you are saying that IIO stuff is optional, add it to Kconfig
>> explicitly:
>>
>> config "TOUCHSCREEN_TSC2007_IIO"
>> bool "IIO interface for external ADC input and temperature"
>> depends on TOUCHSCREEN_TSC2007
>> depends on IIO=y || IIO=TOUCHSCREEN_TSC2007
>> help
>> ...
>>
>> and use this symbols in makefile:
>>
>> and in Makefile:
>>
>> obj-$(CONFIG_TOUCHSCREEN_TSC2007) += tsc2007.o
>> tsc2007-y := tsc2007-core.o ...
>> tsc2007-$(CONFIG_TOUCHSCREEN_TSC2007_IIO) += tsc2007_iio.o
>
> Ah, ok. Well, we tried to make it without an explicit config option
> but it does not hurt to have one.
>
> Your proposal works fine for 3 out of the 4 possible combinations.
>
> I think it is unlikely that the combination TOUCHSCREEN_TSC2007=y IIO=m
> is needed at all (we configure as much as possible as =m in our kernel).
Indeed - that shouldn't work and is blocked by the above which is good.
>
> Patch v9 will come next (where I have also moved this iio driver
> patch to be 8/8).
Wise move ;)
>
> BR and thanks,
> Nikolaus
>