Re: [PATCHv2 1/5] clk: mvebu: support for 98DX3236 SoC

[Mark Rutland]

On Thu, Jan 05, 2017 at 04:36:37PM +1300, Chris Packham wrote:
> The 98DX3236, 98DX3336, 98DX4521 and variants have a different TCLK from
> the Armada XP (200MHz vs 250MHz). The CPU core clock is fixed at 800MHz.
> 
> The clock gating options are a subset of those on the Armada XP.
> 
> The core clock divider is different to the Armada XP also.
> 
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Update devicetree binding documentation for new compatible string
> 
>  .../devicetree/bindings/clock/mvebu-cpu-clock.txt  |   1 +
>  drivers/clk/mvebu/Makefile                         |   2 +-
>  drivers/clk/mvebu/armada-xp.c                      |  42 +++++
>  drivers/clk/mvebu/clk-cpu.c                        |  33 +++-
>  drivers/clk/mvebu/mv98dx3236-corediv.c             | 207 +++++++++++++++++++++
>  5 files changed, 281 insertions(+), 4 deletions(-)
>  create mode 100644 drivers/clk/mvebu/mv98dx3236-corediv.c


It looks like you also need to update
Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt for the
addition of "marvell,mv98dx3236-corediv-clock".

> 
> diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> index 99c214660bdc..7f28506eaee7 100644
> --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt
> @@ -3,6 +3,7 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
>  Required properties:
>  - compatible : shall be one of the following:
>  	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
> +	"marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC
>  - reg : Address and length of the clock complex register set, followed
>          by address and length of the PMU DFS registers
>  - #clock-cells : should be set to 1.

[...]

> +static void __init mv98dx3236_corediv_clk_init(struct device_node *node)
> +{
> +	struct clk_init_data init;
> +	struct clk_corediv *corediv;
> +	struct clk **clks;
> +	void __iomem *base;
> +	const __be32 *off;
> +	const char *parent_name;
> +	const char *clk_name;
> +	int len;
> +	struct device_node *dfx_node;
> +
> +	dfx_node = of_parse_phandle(node, "base", 0);
> +	if (WARN_ON(!dfx_node))

What's going on here? The existing bingings don't mention a "base"
phandle, and nothing was added to describe it.

> +		return;
> +
> +	off = of_get_property(node, "reg", &len);
> +	if (WARN_ON(!off))
> +		return;

Please don't use of_get_property directly; generally you should use the
existing higher-level helpers like of_proeprty_read_u32().

> +
> +	base = of_iomap(dfx_node, 0);
> +	if (WARN_ON(!base))
> +		return;
> +
> +	of_node_put(dfx_node);
> +
> +	parent_name = of_clk_get_parent_name(node, 0);
> +
> +	clk_data.clk_num = 1;
> +
> +	/* clks holds the clock array */
> +	clks = kcalloc(clk_data.clk_num, sizeof(struct clk *),
> +				GFP_KERNEL);
> +	if (WARN_ON(!clks))
> +		goto err_unmap;
> +	/* corediv holds the clock specific array */
> +	corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv),
> +				GFP_KERNEL);
> +	if (WARN_ON(!corediv))
> +		goto err_free_clks;
> +
> +	spin_lock_init(&corediv->lock);
> +
> +	of_property_read_string_index(node, "clock-output-names",
> +					  0, &clk_name);
> +
> +	init.num_parents = 1;
> +	init.parent_names = &parent_name;
> +	init.name = clk_name;
> +	init.ops = &ops;
> +	init.flags = 0;
> +
> +	corediv[0].reg = (void *)((int)base + be32_to_cpu(*off));

I don't understand this, but I guess this has something to do with that
base phandle. Is the corediv clock a sub-component of some "base" clock?
I don't think this binding is the best way of describing that.

Thanks,
Mark.