[PATCH v2] net: stmmac: fix maxmtu assignment to be within valid range

[Kweh, Hock Leong]

From: "Kweh, Hock Leong" <hock.leong.kweh@xxxxxxxxx>

There is no checking valid value of maxmtu when getting it from device tree.
This resolution added the checking condition to ensure the assignment is
made within a valid range.

Signed-off-by: Kweh, Hock Leong <hock.leong.kweh@xxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 92ac006..4df555e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3345,8 +3345,14 @@ int stmmac_dvr_probe(struct device *device,
 		ndev->max_mtu = JUMBO_LEN;
 	else
 		ndev->max_mtu = SKB_MAX_HEAD(NET_SKB_PAD + NET_IP_ALIGN);
-	if (priv->plat->maxmtu < ndev->max_mtu)
+
+	if ((priv->plat->maxmtu < ndev->max_mtu) &&
+	    (priv->plat->maxmtu >= ndev->min_mtu))
 		ndev->max_mtu = priv->plat->maxmtu;
+	else if (priv->plat->maxmtu != 0)
+		netdev_warn(priv->dev,
+			    "%s: warning: maxmtu having invalid value (%d)\n",
+			    __func__, priv->plat->maxmtu);
 
 	if (flow_ctrl)
 		priv->flow_ctrl = FLOW_AUTO;	/* RX/TX pause on */
-- 
1.7.9.5