On Mon, Feb 20, 2017 at 04:02:16PM +0800, Chris Zhong wrote:I guess John will send the v4 patch soon, since there are not many point need to change.
Hi allDo we have an ETA on when John is planning on respinning his patchset based on
[Resend this v7 version series, since there are 5 mails have gone missing, last
This version does not change the existing v6 patches, just to add the
"bandwidth fix" patch back, since we really need it.
This patch serial is for RK3399 MIPI DSI. The MIPI DSI controller of
RK3399 is almost the same as RK3288, except a little bit of difference
in phy clock controlling and port id selection register. These patches
add RK3399 support and the power domain support.
And these patches base on John Keeping's v3 patches, it fixes many bugs,
they have been tested on rk3288 evb board.
Changes in v6:
- no need check phy_cfg_clk before enable/disable
Changes in v5:
- check the error of phy_cfg_clk in dw_mipi_dsi_bind
Changes in v4:
- remove the unrelated change
Changes in v3:
- base on John Keeping's patch series
Chris Zhong (7):
dt-bindings: add rk3399 support for dw-mipi-rockchip
drm/rockchip/dsi: dw-mipi: support RK3399 mipi dsi
drm/rockchip/dsi: dw-mipi: correct the coding style
drm/rockchip/dsi: remove mode_valid function
dt-bindings: add power domain node for dw-mipi-rockchip
drm/rockchip/dsi: fix insufficient bandwidth of some panel
drm/rockchip/dsi: add dw-mipi power domain support
.../display/rockchip/dw_mipi_dsi_rockchip.txt | 7 +-
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 160 ++++++++++++---------
2 files changed, 100 insertions(+), 67 deletions(-)
dri-devel mailing list