Re: [PATCH 0/5] Fix whole native SPI TPM driver
From: Jarkko Sakkinen
Date: Wed Feb 22 2017 - 16:19:51 EST
On Thu, Feb 16, 2017 at 04:08:21PM +0000, Peter Huewe wrote:
> During our testing it showed that unfortunately the whole native spi tpm driver
> was more or less non-functional since it was merged, e.g. the wrong byte for
> waitstate handling was used and transfers larger than 64 bytes did not work at all.
> This was probably caused by the merging of the different approaches back then,
> as the initial RFC patch did not have these problems, and also my sudden lack
> of time/commitment back then.
> I'm sorry that the final driver code went untested for that long time.
> This patch set fixes these issues one by one.
> In order to avoid duplication the read/write function was consolidated to one
> transfer function, so we do not have to apply the same fix at two locations.
> Maybe consider squashing it - we splitted it for easier review.
> Affected Kernels: 4.8, 4.9, 4.10
> Patchset was tested on Raspberry Pi2 with SLB9670 (TPM1.2 and TPM2.0)
> Peter Huewe (5):
> tpm_tis_spi: Use single function to transfer data
> tpm_tis_spi: Abort transfer when too many wait states are signaled
> tpm_tis_spi: Check correct byte for wait state indicator
> tpm_tis_spi: Remove limitation of transfers to MAX_SPI_FRAMESIZE bytes
> tpm_tis_spi: Add small delay after last transfer
> drivers/char/tpm/tpm_tis_spi.c | 163 +++++++++++++++++------------------------
> 1 file changed, 69 insertions(+), 94 deletions(-)
I also found type errors a whilea ago:
Do this take care of these issues?