[PATCH v3 0/5] ATA/ARM: convert ARM/DaVinci to use libata PATA drivers

From: Bartlomiej Zolnierkiewicz
Date: Wed Mar 22 2017 - 14:21:45 EST


Hi,

This patchset adds Palmchip BK3710 IDE controller driver to
libata and switches ARM/DaVinci to use it (instead of the old
IDE driver).

Sekhar, please check that it still works after changes, thanks.

Changes since v2
(https://www.spinics.net/lists/arm-kernel/msg568597.html):
- fixed 'checkpatch.pl --strict' issues reported by Sekhar
- added chipset initialization fixups in the new patches #2-3
(based on the review comments from Sergei)

Changes since v1
(https://www.spinics.net/lists/arm-kernel/msg567442.html):
- addressed review comments from Sergei Shtylyov
- fixed cycle_time unitialized variable issue

Changes since v0.1 draft patch version
(https://www.spinics.net/lists/arm-kernel/msg566932.html):
- fixed cycle_time build warning
- added platform support fixes from Sekhar
- added defconfig changes from Sekhar
- preserved platform support for the old IDE driver
- split it on 3 patches

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics


Bartlomiej Zolnierkiewicz (3):
ata: add Palmchip BK3710 PATA controller driver
pata_bk3710: disable IORDY Timer on chipset initialization
pata_bk3710: clear status bits of BMISP on chipset initialization

Sekhar Nori (2):
ARM: davinci: add pata_bk3710 libata driver support
ARM: davinci_all_defconfig: convert to use libata PATA

arch/arm/configs/davinci_all_defconfig | 4 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 3 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 3 +-
arch/arm/mach-davinci/board-neuros-osd2.c | 3 +-
drivers/ata/Kconfig | 9 +
drivers/ata/Makefile | 1 +
drivers/ata/pata_bk3710.c | 382 ++++++++++++++++++++++++++++++
7 files changed, 399 insertions(+), 6 deletions(-)
create mode 100644 drivers/ata/pata_bk3710.c

--
1.9.1