Re: [REGRESSION][Stable][v3.12.y][v4.4.y][v4.9.y][v4.10.y][v4.11-rc1] scsi: storvsc: properly set residual data length on errors

From: Joseph Salisbury
Date: Tue Mar 28 2017 - 10:29:23 EST


On 03/27/2017 06:14 PM, Stephen Hemminger wrote:
> Are you sure the real problem is not the one fixed by this commit?
>
> commit f1c635b439a5c01776fe3a25b1e2dc546ea82e6f
> Author: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
> Date: Tue Mar 7 09:15:53 2017 -0800
>
> scsi: storvsc: Workaround for virtual DVD SCSI version
>
> Hyper-V host emulation of SCSI for virtual DVD device reports SCSI
> version 0 (UNKNOWN) but is still capable of supporting REPORTLUN.
>
> Without this patch, a GEN2 Linux guest on Hyper-V will not boot 4.11
> successfully with virtual DVD ROM device. What happens is that the SCSI
> scan process falls back to doing sequential probing by INQUIRY. But the
> storvsc driver has a previous workaround that masks/blocks all errors
> reports from INQUIRY (or MODE_SENSE) commands. This workaround causes
> the scan to then populate a full set of bogus LUN's on the target and
> then sends kernel spinning off into a death spiral doing block reads on
> the non-existent LUNs.
>
> By setting the correct blacklist flags, the target with the DVD device
> is scanned with REPORTLUN and that works correctly.
>
> Patch needs to go in current 4.11, it is safe but not necessary in older
> kernels.
>
> Signed-off-by: Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>
> Reviewed-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
> Reviewed-by: Christoph Hellwig <hch@xxxxxx>
> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
>
> -----Original Message-----
> From: Joseph Salisbury [mailto:joseph.salisbury@xxxxxxxxxxxxx]
> Sent: Monday, March 27, 2017 1:22 PM
> To: Long Li <longli@xxxxxxxxxxxxx>
> Cc: KY Srinivasan <kys@xxxxxxxxxxxxx>; Martin K. Petersen <martin.petersen@xxxxxxxxxx>; Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>; Stephen Hemminger <sthemmin@xxxxxxxxxxxxx>; jejb@xxxxxxxxxxxxxxxxxx; devel@xxxxxxxxxxxxxxxxxxxxxx; linux-scsi <linux-scsi@xxxxxxxxxxxxxxx>; LKML <linux-kernel@xxxxxxxxxxxxxxx>; stable@xxxxxxxxxxxxxxx; Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
> Subject: [REGRESSION][Stable][v3.12.y][v4.4.y][v4.9.y][v4.10.y][v4.11-rc1] scsi: storvsc: properly set residual data length on errors
>
> Hi Long Li,
>
> A kernel bug report was opened against Ubuntu [0]. After a kernel
> bisect, it was found that reverting the following commit resolved this bug:
>
> commit 40630f462824ee24bc00d692865c86c3828094e0
> Author: Long Li <longli@xxxxxxxxxxxxx>
> Date: Wed Dec 14 18:46:03 2016 -0800
>
> scsi: storvsc: properly set residual data length on errors
>
>
> The regression was introduced in mainline as of v4.11-rc1. It was also
> cc'd to stable and has landed in v3.12.y, v4.4.y, v4.9.y and v4.10.y.
>
>
> This regression seems pretty severe since it's preventing virtual
> machines from booting. It's affecting a couple of users so far. I was
> hoping to get your feedback, since you are the patch author. Do you
> think gathering any additional data will help diagnose this issue, or
> would it be best to submit a revert request?
>
>
> Thanks,
>
> Joe
>
>
> [0] http://pad.lv/1674635
>
>
Hi Stephen,


Thanks again for pointing out commit
f1c635b439a5c01776fe3a25b1e2dc546ea82e6f. It does indeed fix the bug.
I noticed the commit was not cc'd to stable. Would it be possible to do
that?


Thanks,


Joe