Re: [PATCH 0/2] mtd: spi-nor: add stm32 qspi driver

[Ludovic BARRE]

hi Cyrille

I see your patch series

[PATCH v5 0/6] mtd: spi-nor: parse SFDP tables to setup (Q)SPI memories

No problem, I rebase my V2 onto your patch


BR
Ludo

On 03/29/2017 06:51 PM, Cyrille Pitchen wrote:
> Hi Ludovic,
>
> Le 27/03/2017 à 14:54, Ludovic Barre a écrit :
> > From: Ludovic Barre <ludovic.barre@xxxxxx>
> >
> > This patch set adds a SPI-NOR driver for stm32 QSPI controller.
> > It is a specialized SPI interface for serial Flash devices.
> > It supports 1 or 2 Flash device with single, dual and quad SPI Flash memories.
> >
> > It can operate in any of the following modes:
> > -indirect mode: all the operations are performed using the quadspi
> >   registers
> > -read memory-mapped mode: the external Flash memory is mapped to the
> >   microcontroller address space and is seen by the system as if it was
> >   an internal memory
> >
> > Ludovic Barre (2):
> >    dt-bindings: Document the STM32 QSPI bindings
> >    mtd: spi-nor: add driver for STM32 quad spi flash controller
> >
> >   .../devicetree/bindings/mtd/stm32-quadspi.txt      |  45 ++
> >   drivers/mtd/spi-nor/Kconfig                        |   7 +
> >   drivers/mtd/spi-nor/Makefile                       |   1 +
> >   drivers/mtd/spi-nor/stm32-quadspi.c                | 679 +++++++++++++++++++++
> >   4 files changed, 732 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/mtd/stm32-quadspi.txt
> >   create mode 100644 drivers/mtd/spi-nor/stm32-quadspi.c
> Just a small word to warn you that I'm likely to ask you to rebase this
> series onto the patch "mtd: spi-nor: introduce more SPI protocols and
> the Dual Transfer Mode". Indeed, I need to synchronize with Marek first
> but I plan to merge this patch within few days.
>
>
> Best regards,
>
> Cyrille