[PATCH v3 tip/core/rcu 04/11] rcu: Make RCU_FANOUT_LEAF help text more explicit about skew_tick

[Paul E. McKenney]

If you set RCU_FANOUT_LEAF too high, you can get lock contention
on the leaf rcu_node, and you should boot with the skew_tick kernel
parameter set in order to avoid this lock contention.  This commit
therefore upgrades the RCU_FANOUT_LEAF help text to explicitly state
this.

Signed-off-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
---
 init/Kconfig | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/init/Kconfig b/init/Kconfig
index a92f27da4a27..c549618c72f0 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -612,11 +612,17 @@ config RCU_FANOUT_LEAF
 	  initialization.  These systems tend to run CPU-bound, and thus
 	  are not helped by synchronized interrupts, and thus tend to
 	  skew them, which reduces lock contention enough that large
-	  leaf-level fanouts work well.
+	  leaf-level fanouts work well.  That said, setting leaf-level
+	  fanout to a large number will likely cause problematic
+	  lock contention on the leaf-level rcu_node structures unless
+	  you boot with the skew_tick kernel parameter.
 
 	  Select a specific number if testing RCU itself.
 
-	  Select the maximum permissible value for large systems.
+	  Select the maximum permissible value for large systems, but
+	  please understand that you may also need to set the skew_tick
+	  kernel boot parameter to avoid contention on the rcu_node
+	  structure's locks.
 
 	  Take the default if unsure.
 
-- 
2.5.2