Re: [RESEND PATCH 1/2] arc: axs10x: Add DT bindings for I2S audio playback

From: Jose Abreu
Date: Wed Apr 26 2017 - 04:56:18 EST


Hi Vineet,


On 24-04-2017 18:36, Vineet Gupta wrote:
> On 04/21/2017 03:15 AM, Jose Abreu wrote:
>> This patch adds the necessary DT bindings to get HDMI audio
>> output in ARC AXS10x SDP. The bindings for I2S controller were
>> added as well as the bindings for simple audio card.
> Are these waiting on Rob or is it OK for me to pick these up for 4.12 ?

Yes, I was waiting for Rob ack but he has been silent. It would
be nice if these went for 4.12.

Best regards,
Jose Miguel Abreu

>
> -Vineet
>
>> Signed-off-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
>> Acked-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
>> Cc: Carlos Palminha <palminha@xxxxxxxxxxxx>
>> Cc: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
>> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
>> Cc: Vineet Gupta <vgupta@xxxxxxxxxxxx>
>> Cc: devicetree@xxxxxxxxxxxxxxx
>> Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx
>> Cc: linux-kernel@xxxxxxxxxxxxxxx
>> ---
>> arch/arc/boot/dts/axs10x_mb.dtsi | 22 ++++++++++++++++++----
>> 1 file changed, 18 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
>> index d6c1bbc..9d882b1 100644
>> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
>> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
>> @@ -149,12 +149,13 @@
>> interrupts = <14>;
>> };
>>
>> - i2c@0x1e000 {
>> - compatible = "snps,designware-i2c";
>> + i2s: i2s@1e000 {
>> + compatible = "snps,designware-i2s";
>> reg = <0x1e000 0x100>;
>> - clock-frequency = <400000>;
>> - clocks = <&i2cclk>;
>> + clocks = <&i2sclk 0>;
>> + clock-names = "i2sclk";
>> interrupts = <15>;
>> + #sound-dai-cells = <0>;
>> };
>>
>> i2c@0x1f000 {
>> @@ -174,6 +175,7 @@
>> adi,input-colorspace = "rgb";
>> adi,input-clock = "1x";
>> adi,clock-delay = <0x03>;
>> + #sound-dai-cells = <0>;
>>
>> ports {
>> #address-cells = <1>;
>> @@ -295,5 +297,17 @@
>> };
>> };
>> };
>> +
>> + sound_playback {
>> + compatible = "simple-audio-card";
>> + simple-audio-card,name = "AXS10x HDMI Audio";
>> + simple-audio-card,format = "i2s";
>> + simple-audio-card,cpu {
>> + sound-dai = <&i2s>;
>> + };
>> + simple-audio-card,codec {
>> + sound-dai = <&adv7511>;
>> + };
>> + };
>> };
>> };