Re: [PATCH] ACPI: SPCR: Use access width to determine mmio usage

[Jon Masters]

Sorry for top post. We would need to also need to handle other OEMs like HPE m400. The set is limited but we want to key off the right ID. You could also key off DMI data if it were later in boot. But probably too early at this point.

-- 
Computer Architect | Sent from my 64-bit #ARM Powered phone

> On May 8, 2017, at 17:24, Jon Mason <jon.mason@xxxxxxxxxxxx> wrote:
> 
>> On Mon, May 08, 2017 at 01:51:20PM -0700, Loc Ho wrote:
>> Hi Jon,
>> 
>>> On Mon, May 8, 2017 at 1:34 PM, Jon Mason <jon.mason@xxxxxxxxxxxx> wrote:
>>>> On Mon, May 8, 2017 at 3:57 PM, Loc Ho <lho@xxxxxxx> wrote:
>>>> Hi Jon,
>>>> 
>>>>>> 
>>>>>>>> The current SPCR code does not check the access width of the mmio, and
>>>>>>>> uses a default of 8bit register accesses.  This prevents devices that
>>>>>>>> only do 16 or 32bit register accesses from working.  By simply checking
>>>>>>>> this field and setting the mmio string appropriately, this issue can be
>>>>>>>> corrected.  To prevent any legacy issues, the code will default to 8bit
>>>>>>>> accesses if the value is anything but 16 or 32.
>>>>>>> 
>>>>>>> Thanks for this. Just as an FYI I've a running discussion with Microsoft
>>>>>>> about defining additional UART subtypes in the DBG2 for special case
>>>>>>> UARTs. Specifically, I want to address AppliedMicro's special 8250 dw IP
>>>>>>> that also has a non-standard clock. At this time, there is general
>>>>>>> agreement to use the access width for some cases rather than defining
>>>>>>> yet more subtypes - so your patch is good.
>>>>>>> 
>>>>>>> Loc/Applied: please track this thread, incorporate feedback, and also
>>>>>>> track the other general recent discussions of 8250 dw from this week.
>>>>>> 
>>>>>> Thanks for forward me this patch. This patch does not work with X-Gene
>>>>>> v1 and v2 SoC's. As BIOS SPCR encodes these info as:
>>>>>> 
>>>>>> Bit Width: 32
>>>>>> Bit Offset: 0
>>>>>> Encoded Access Width: 01 (Byte Access)
>>>>>> 
>>>>>> With this patch, it would use the "mmio" instead the "mmio32" as with
>>>>>> this patch - https://patchwork.kernel.org/patch/9460959
>>>>> 
>>>>> I think this is why we need the DBG2 subtype for Applied X-Gene1. I'm
>>>>> hoping the update to the SPCR/DBG2 spec is done soon.
>>>> 
>>>> We can't rely on the BIOS change to support this new subtype as we
>>>> have system that is already in production deployment. When these
>>>> system upgrade to new version of the OS (stock, RHELSA, or whatever),
>>>> they will break. We need the patch from
>>>> https://patchwork.kernel.org/patch/9460959/ rolled upstream.
>>> 
>>> There is no reason why the patch you reference cannot co-exist with
>>> the one I am submitting here.  In this case, my patch would set it to
>>> mmio, then the patch you link above would reset it to mmio32.
>>> Personally, I would recommend a big, fat comment on why this extra
>>> step is necessary, but it should work as desired.  Alternatively, we
>>> could add some kind of quirk library (similar to
>>> qdf2400_erratum_44_present) where the OEM/OEM Table ID is referenced
>>> and workaround applied.  Thoughts?
>> 
>> That's was my first version but after seeing both versions, I think
>> they are better solution as it works for more SoC's than just our. As
>> you had suggested, we should apply your patch and
>> https://patchwork.kernel.org/patch/9460959. The third patch -
>> https://patchwork.kernel.org/patch/9462183/ - conflicts with your.
>> 
>> Summary:
>> 1. Applied your - https://lkml.org/lkml/2017/5/4/450
>> 2. Applied this one - https://patchwork.kernel.org/patch/9460959/
>> 
>> -Loc
> 
> What if we simply applied the following (100% untested) patch to add
> the quirk framework I was suggesting?  It can be applied on top of the
> patch I submitted previously.
> 
> 
> diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
> index 63b690d142f1..c87569b345e3 100644
> --- a/drivers/acpi/spcr.c
> +++ b/drivers/acpi/spcr.c
> @@ -36,6 +36,14 @@ static bool qdf2400_erratum_44_present(struct acpi_table_header *h)
>    return false;
> }
> 
> +static void spcr_quirks(struct acpi_table_spcr *table, char **iotype)
> +{
> +    struct acpi_table_header *h = &table->header;
> +
> +    if (!memcmp(h->oem_table_id, "XGENESPC", ACPI_OEM_TABLE_ID_SIZE))
> +        *iotype = "mmio32";
> +}
> +
> /**
>  * parse_spcr() - parse ACPI SPCR table and add preferred console
>  *
> @@ -88,6 +96,9 @@ int __init parse_spcr(bool earlycon)
>            iotype = "mmio32";
>            break;
>        }
> +
> +        /* Fixup any non-standard compliant devices */
> +        spcr_quirks(table, &iotype);
>    } else
>        iotype = "io";
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html