[PATCH 4.10 020/129] power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING

From: Greg Kroah-Hartman
Date: Thu May 11 2017 - 11:57:03 EST


4.10-stable review patch. If anyone has any objections, please let me know.

------------------

From: Liam Breck <liam@xxxxxxxxxxxxxxxxx>

commit 767eee362fd72bb2ca44cc80419ca4b38c6d8369 upstream.

The interrupt signal is TRIGGER_FALLING. This is is specified in the
data sheet PIN FUNCTIONS: "The INT pin sends active low, 256us
pulse to host to report charger device status and fault."

Also the direction can be seen in the data sheet Figure 37 "BQ24190
with D+/D- Detection and USB On-The-Go (OTG)" which shows a 10k
pull-up resistor installed for the sample configurations.

Fixes: d7bf353fd0aa3 ("bq24190_charger: Add support for TI BQ24190 Battery Charger")
Signed-off-by: Liam Breck <kernel@xxxxxxxxxxxxxxxxx>
Acked-by: Mark Greer <mgreer@xxxxxxxxxxxxxxx>
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sebastian Reichel <sre@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/power/supply/bq24190_charger.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/supply/bq24190_charger.c
+++ b/drivers/power/supply/bq24190_charger.c
@@ -1394,7 +1394,7 @@ static int bq24190_probe(struct i2c_clie

ret = devm_request_threaded_irq(dev, bdi->irq, NULL,
bq24190_irq_handler_thread,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"bq24190-charger", bdi);
if (ret < 0) {
dev_err(dev, "Can't set up irq handler\n");