[PATCH v4 2/9] gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards

From: Jan Kiszka
Date: Tue May 30 2017 - 03:01:47 EST


Commtech adapters need the MPIOs for internal purposes, and the
gpio-exar driver already refused to pick them up. But there is actually
no point in even creating the underlying platform device.

Signed-off-by: Jan Kiszka <jan.kiszka@xxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/gpio/gpio-exar.c | 3 ---
drivers/tty/serial/8250/8250_exar.c | 4 +++-
2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-exar.c b/drivers/gpio/gpio-exar.c
index 081076771217..006a9a67c2a4 100644
--- a/drivers/gpio/gpio-exar.c
+++ b/drivers/gpio/gpio-exar.c
@@ -124,9 +124,6 @@ static int gpio_exar_probe(struct platform_device *pdev)
void __iomem *p;
int index, ret;

- if (pcidev->vendor != PCI_VENDOR_ID_EXAR)
- return -ENODEV;
-
/*
* Map the pci device to get the register addresses.
* We will need to read and write those registers to control
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 8984e8b2d524..c29c7e675890 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -245,7 +245,9 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev,
/* Setup Multipurpose Input/Output pins. */
setup_gpio(pcidev, p);

- port->port.private_data = xr17v35x_register_gpio(pcidev);
+ if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
+ port->port.private_data =
+ xr17v35x_register_gpio(pcidev);
}

return 0;
--
2.12.3