[PATCH v3 0/6] ARM: at91: initial samx7 support

[Alexandre Belloni]

Hi,

This series adds initial support for Atmel armv7m SoCs.

Changes in v3:
 - dropped most of the changes in Atmel/README
 - rebased on v4.12-rc1
 - removed the dtsi until the tcb series is taken

Changes in v2:
 - fixed checkpatch issues
 - Added documentation
 - removed Ethernet from the dtsi until the driver change is taken


Alexandre Belloni (3):
  ARM: at91: Documentation: add samx7 families
  ARM: at91: Document samx7 compatibles
  ARM: at91: handle CONFIG_PM for armv7m configurations

SzemzÅ AndrÃs (3):
  ARM: at91: Add armv7m support
  ARM: at91: add SAMx7 SoC detection
  ARM: at91: debug: add samx7 support

 Documentation/arm/Atmel/README                     | 38 +++++++++++++++++++++-
 .../devicetree/bindings/arm/atmel-at91.txt         | 30 +++++++++++++++++
 arch/arm/Kconfig.debug                             | 10 ++++++
 arch/arm/mach-at91/Kconfig                         | 15 ++++++++-
 arch/arm/mach-at91/Makefile                        |  4 +--
 arch/arm/mach-at91/Makefile.boot                   |  3 ++
 arch/arm/mach-at91/samx7.c                         | 34 +++++++++++++++++++
 drivers/soc/atmel/soc.c                            | 24 ++++++++++++++
 drivers/soc/atmel/soc.h                            | 26 +++++++++++++++
 9 files changed, 180 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-at91/Makefile.boot
 create mode 100644 arch/arm/mach-at91/samx7.c

-- 
2.11.0