Re: [PATCH] iio: Aspeed ADC - Handle return value of clk_prepare_enable

[Jonathan Cameron]

On Mon, 5 Jun 2017 09:56:25 -0700
Rick Altherr <raltherr@xxxxxxxxxx> wrote:

> Reviewed-by: Rick Altherr <raltherr@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.

Thanks,

Jonathan
> 
> On Sat, Jun 3, 2017 at 1:50 AM, Jonathan Cameron <jic23@xxxxxxxxxx> wrote:
> 
> > On Mon, 29 May 2017 13:12:12 +0530
> > Arvind Yadav <arvind.yadav.cs@xxxxxxxxx> wrote:
> >  
> > > clk_prepare_enable() can fail here and we must check its return value.
> > >
> > > Signed-off-by: Arvind Yadav <arvind.yadav.cs@xxxxxxxxx>  
> > Please make sure to cc the driver author.  This is a fairly new
> > driver, so chances are Rick will still be answering this email
> > address.
> >
> > Patch looks fine to me, but I would like to give Rick the opportunity
> > to respond.
> >
> > Jonathan  
> > > ---
> > >  drivers/iio/adc/aspeed_adc.c | 6 +++++-
> > >  1 file changed, 5 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> > > index 62670cb..e0ea411 100644
> > > --- a/drivers/iio/adc/aspeed_adc.c
> > > +++ b/drivers/iio/adc/aspeed_adc.c
> > > @@ -212,7 +212,10 @@ static int aspeed_adc_probe(struct platform_device  
> > *pdev)  
> > >       }
> > >
> > >       /* Start all channels in normal mode. */
> > > -     clk_prepare_enable(data->clk_scaler->clk);
> > > +     ret = clk_prepare_enable(data->clk_scaler->clk);
> > > +     if (ret)
> > > +             goto clk_enable_error;
> > > +
> > >       adc_engine_control_reg_val = GENMASK(31, 16) |
> > >               ASPEED_OPERATION_MODE_NORMAL | ASPEED_ENGINE_ENABLE;
> > >       writel(adc_engine_control_reg_val,
> > > @@ -236,6 +239,7 @@ static int aspeed_adc_probe(struct platform_device  
> > *pdev)  
> > >       writel(ASPEED_OPERATION_MODE_POWER_DOWN,
> > >               data->base + ASPEED_REG_ENGINE_CONTROL);
> > >       clk_disable_unprepare(data->clk_scaler->clk);
> > > +clk_enable_error:
> > >       clk_hw_unregister_divider(data->clk_scaler);
> > >
> > >  scaler_error:  
> >
> >