[PATCH 1/2] x86/microcode: Look for the initrd at the proper address on 32-bit

[Borislav Petkov]

From: Borislav Petkov <bp@xxxxxxx>

Early during boot, the BSP finds the ramdisk's position from boot_params
but by the time the APs get to boot, the BSP has continued in the mean
time and has potentially managed to relocate that ramdisk.

And in that case, the APs need to find the ramdisk at its new position,
in *physical* memory as they're running before paging has been enabled.

Thus, get the updated physical location of the ramdisk which is in the
relocated_ramdisk variable.

Signed-off-by: Borislav Petkov <bp@xxxxxxx>
---
 arch/x86/kernel/cpu/microcode/core.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index e53d3c909840..053e5cd1dce0 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -290,6 +290,18 @@ struct cpio_data find_microcode_in_initrd(const char *path, bool use_pa)
 			return (struct cpio_data){ NULL, 0, "" };
 		if (initrd_start)
 			start = initrd_start;
+	} else {
+		/*
+		 * The picture on 32-bit is a bit different: we need to get
+		 * the *physical* address to which the ramdisk was relocated,
+		 * i.e., relocated_ramdisk (not initrd_start) and since we're
+		 * running from physical addresses, we need to access
+		 * relocated_ramdisk through its *physical* address.
+		 */
+		u64 *rr = (u64 *)__pa_nodebug(&relocated_ramdisk);
+
+		if (*rr)
+			start = *rr;
 	}
 
 	return find_cpio_data(path, (void *)start, size, NULL);
-- 
2.13.0