Re: [PATCH v2 2/2] soc: brcmstb: Add driver for DPFE

[Florian Fainelli]

On 06/14/2017 09:34 AM, Markus Mayer wrote:
> On 13 June 2017 at 17:03, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
>> Hi Markus,
>>
>> On 06/13/2017 03:37 PM, Markus Mayer wrote:
>>> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
>>>
>>> This driver allows access to DRAM properties, such as the refresh rate,
>>> via the Broadcom STB DDR PHY Front End (DPFE). The refresh rate can be
>>> used as indirect indicator of the DRAM temperature.
>>>
>>> The driver also allows setting of the sampling interval.
>>>
>>> Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
>>> ---
>>>  MAINTAINERS                      |   8 +
>>>  drivers/soc/bcm/brcmstb/Makefile |   2 +-
>>>  drivers/soc/bcm/brcmstb/dpfe.c   | 689 +++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 698 insertions(+), 1 deletion(-)
>>>  create mode 100644 drivers/soc/bcm/brcmstb/dpfe.c
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index f7d568b..04f0be6 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -2864,6 +2864,14 @@ S:     Maintained
>>>  F:   Documentation/devicetree/bindings/cpufreq/brcm,stb-avs-cpu-freq.txt
>>>  F:   drivers/cpufreq/brcmstb*
>>>
>>> +BROADCOM STB SOC DPFE DRIVER
>>> +M:   Markus Mayer <mmayer@xxxxxxxxxxxx>
>>> +M:   bcm-kernel-feedback-list@xxxxxxxxxxxx
>>> +L:   linux-arm-kernel@xxxxxxxxxxxxxxxxxxx (moderated for non-subscribers)
>>> +S:   Maintained
>>> +F:   Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt
>>> +F:   drivers/misc/brcmstb-dpfe.c
>>
>> Just one nit: this should be drivers/soc/bcm/brcmstb/dpfe.c, other than
>> that, I just need an Ack from Rob on the binding, and I will queue this
>> up, thanks!
> 
> Oops. Thanks for catching that. Would you like me to re-send or will
> you fix up that path on your end?

I can fix it up if Rob is happy with the current binding, if you need to
resubmit, please fix that as well. Thanks!
-- 
-- 
Florian