Re: [PATCH v2 1/2] dt/bindings: Add bindings for Broadcom STB DRAM Sensors
From: Markus Mayer
Date: Mon Jun 19 2017 - 13:26:55 EST
On 18 June 2017 at 07:05, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Tue, Jun 13, 2017 at 03:37:09PM -0700, Markus Mayer wrote:
>> From: Markus Mayer <mmayer@xxxxxxxxxxxx>
>> Provide bindings for the Broadcom STB DDR PHY Front End (DPFE).
>> Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
>> .../devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt | 27 ++++++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,dpfe-cpu.txt
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
To bring up the previous discussion regarding enumerating multiple
nodes (so far we need two dpfe nodes for some platforms), how should
we go about this? We were originally proposing to use "cell-index",
but you said this was OpenFirmware only and couldn't be used in device
tree. See https://lkml.org/lkml/2017/4/27/574.
We do need to use something, because the driver needs to know if it
should be accessing dpfe0 or dpfe1. What should we use?