[PATCH 3.10 215/268] rtc: s35390a: improve irq handling

[Willy Tarreau]

From: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>

commit 3bd32722c827d00eafe8e6d5b83e9f3148ea7c7e upstream.

On some QNAP NAS devices the rtc can wake the machine. Several people
noticed that once the machine was woken this way it fails to shut down.
That's because the driver fails to acknowledge the interrupt and so it
keeps active and restarts the machine immediatly after shutdown. See
https://bugs.debian.org/794266 for a bug report.

Doing this correctly requires to interpret the INT2 flag of the first read
of the STATUS1 register because this bit is cleared by read.

Note this is not maximally robust though because a pending irq isn't
detected when the STATUS1 register was already read (and so INT2 is not
set) but the irq was not disabled. But that is a hardware imposed problem
that cannot easily be fixed by software.

Signed-off-by: Uwe Kleine-König <uwe@xxxxxxxxxxxxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Willy Tarreau <w@xxxxxx>
---
 drivers/rtc/rtc-s35390a.c | 48 ++++++++++++++++++++++++++++++-----------------
 1 file changed, 31 insertions(+), 17 deletions(-)

diff --git a/drivers/rtc/rtc-s35390a.c b/drivers/rtc/rtc-s35390a.c
index ff6e7b4..b6e220f 100644
--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@@ -35,10 +35,14 @@
 #define S35390A_ALRM_BYTE_HOURS	1
 #define S35390A_ALRM_BYTE_MINS	2
 
+/* flags for STATUS1 */
 #define S35390A_FLAG_POC	0x01
 #define S35390A_FLAG_BLD	0x02
+#define S35390A_FLAG_INT2	0x04
 #define S35390A_FLAG_24H	0x40
 #define S35390A_FLAG_RESET	0x80
+
+/* flag for STATUS2 */
 #define S35390A_FLAG_TEST	0x01
 
 #define S35390A_INT2_MODE_MASK		0xF0
@@ -386,11 +390,11 @@ static struct i2c_driver s35390a_driver;
 static int s35390a_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
-	int err;
+	int err, err_reset;
 	unsigned int i;
 	struct s35390a *s35390a;
 	struct rtc_time tm;
-	char buf[1], status1;
+	char buf, status1;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		err = -ENODEV;
@@ -419,29 +423,35 @@ static int s35390a_probe(struct i2c_client *client,
 		}
 	}
 
-	err = s35390a_reset(s35390a, &status1);
-	if (err < 0) {
+	err_reset = s35390a_reset(s35390a, &status1);
+	if (err_reset < 0) {
+		err = err_reset;
 		dev_err(&client->dev, "error resetting chip\n");
 		goto exit_dummy;
 	}
 
-	err = s35390a_disable_test_mode(s35390a);
-	if (err < 0) {
-		dev_err(&client->dev, "error disabling test mode\n");
-		goto exit_dummy;
-	}
-
-	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, buf, sizeof(buf));
-	if (err < 0) {
-		dev_err(&client->dev, "error checking 12/24 hour mode\n");
-		goto exit_dummy;
-	}
-	if (buf[0] & S35390A_FLAG_24H)
+	if (status1 & S35390A_FLAG_24H)
 		s35390a->twentyfourhour = 1;
 	else
 		s35390a->twentyfourhour = 0;
 
-	if (s35390a_get_datetime(client, &tm) < 0)
+	if (status1 & S35390A_FLAG_INT2) {
+		/* disable alarm (and maybe test mode) */
+		buf = 0;
+		err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &buf, 1);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling alarm");
+			goto exit_dummy;
+		}
+	} else {
+		err = s35390a_disable_test_mode(s35390a);
+		if (err < 0) {
+			dev_err(&client->dev, "error disabling test mode\n");
+			goto exit_dummy;
+		}
+	}
+
+	if (err_reset > 0 || s35390a_get_datetime(client, &tm) < 0)
 		dev_warn(&client->dev, "clock needs to be set\n");
 
 	device_set_wakeup_capable(&client->dev, 1);
@@ -454,6 +464,10 @@ static int s35390a_probe(struct i2c_client *client,
 		err = PTR_ERR(s35390a->rtc);
 		goto exit_dummy;
 	}
+
+	if (status1 & S35390A_FLAG_INT2)
+		rtc_update_irq(s35390a->rtc, 1, RTC_AF);
+
 	return 0;
 
 exit_dummy:
-- 
2.8.0.rc2.1.gbe9624a