Re: [PATCH] iio: dac: DS4424: add Maxim DS4422/DS4424 DAC driver support

From: Linus Walleij
Date: Thu Jun 29 2017 - 08:47:20 EST


On Sat, Jun 24, 2017 at 1:04 AM, Ismail Kose
<Ismail.Kose@xxxxxxxxxxxxxxxxxxx> wrote:

> +Optional properties:
> + - vcc-supply: Power supply us optional. If not defined, driver will ignore it.

*is* optional I guess.

No need to mention the driver.

> +#include <linux/regulator/consumer.h>
(...)
> + struct regulator *vcc_reg;
> + const char *vcc_reg_name;
> + bool regulator_state;

Why do you do this funky stuff?

> +int ds4424_regulator_onoff(struct iio_dev *indio_dev, bool enable)
> +{
> + struct ds4424_data *data = iio_priv(indio_dev);
> + int ret = 0;
> +
> + if (data->vcc_reg == NULL)
> + return ret;

This should not happen.

You get dummy regulators or stubs if the regulator is not there
and that works just fine.

> +
> + if (data->regulator_state == PWR_OFF && enable == PWR_ON) {
> + ret = regulator_enable(data->vcc_reg);
> + if (ret) {
> + pr_err("%s - enable vcc_reg failed, ret=%d\n",
> + __func__, ret);
> + goto done;
> + }
> + } else if (data->regulator_state == PWR_ON && enable == PWR_OFF) {
> + ret = regulator_disable(data->vcc_reg);
> + if (ret) {
> + pr_err("%s - disable vcc_reg failed, ret=%d\n",
> + __func__, ret);
> + goto done;
> + }
> + }
> +
> + data->regulator_state = enable;
> +done:
> + return ret;
> +}

The regulator already has a state and knows if it is on or
off. Why do you insist on having a "regulator state" reinventing
the wheel in the driver?

> + ret = of_property_read_string(node, "vcc-supply", &data->vcc_reg_name);
> + if (ret < 0) {
> + pr_info("DAC vcc-supply is not available in dts\n");
> + data->vcc_reg_name = NULL;
> + }

Don't do this. Just try to get the regulator by name and do not try
to be clever about this, the regulator core will give you a dummy supply
if the regulator is not there.

> + if (data->vcc_reg_name) {

Just skip this check.

> + data->vcc_reg = devm_regulator_get(&client->dev,
> + data->vcc_reg_name);

Just

data->vcc_reg = devm_regulator_get(&client->dev, "vcc");


> + if (IS_ERR(data->vcc_reg)) {
> + ret = PTR_ERR(data->vcc_reg);
> + dev_err(&client->dev,
> + "Failed to get vcc_reg regulator: %d\n", ret);
> + return ret;
> + }

And keep this.

You will get a dummy or stub working just fine if the regulator is not there.

> + ret = ds4424_regulator_onoff(indio_dev, PWR_ON);
> + if (ret < 0) {
> + pr_err("Unable to turn on the regulator. %s:%d, ret: %d\n",
> + __func__, __LINE__, ret);
> + return ret;
> + }

I don't think this helper is even needed. Just enable it here.

Disable it on the other paths.

Problem solved.

Yours,
Linus Walleij