Re: [PATCH v11 0/3]add PCIe driver for Kirin PCIe

[Bjorn Helgaas]

[+cc Catalin, Will, linux-arm-kernel]

Applied patches 2 & 3 to pci/host-kirin for v4.13.

I would like a MAINTAINERS update, too.  If you send me that, I'll
squash it into the driver patch.

Catalin, Will, how do you want to handle the
arch/arm64/configs/defconfig change (patch 3)?  It's currently on my
branch, but I'm happy to drop it if another route is better.

On Mon, Jun 19, 2017 at 06:23:46PM +0800, Xiaowei Song wrote:
> Before Version Patches
> ======================
> patch v9
> http://www.spinics.net/lists/linux-pci/msg61821.html
> patch V8
> http://www.spinics.net/lists/linux-pci/msg61715.html
> patch V7
> https://www.spinics.net/lists/linux-pci/msg61664.html
> patch V6
> https://www.spinics.net/lists/linux-pci/msg61610.html
> 
> patch V4
> https://www.spinics.net/lists/linux-pci/msg61406.html
> 
> patch V3
> https://www.spinics.net/lists/linux-pci/msg61399.html
> 
> Changes between V11 and V9
> ========================
> 1. Fix the indent issues according to the review comments from Bjorn:
>    (1) The value of reg is right-aligned in both dtsi file and Documentation file.
>    (2) Re-indent the space of macro defination pointed out by Bjorn.
>    (3) Adjust the space in 'struct kirin_pcie' defination.
>    (4) Use dev replace of pdev->dev in function  kirin_pcie_get_clk and kirin_pcie_get_resource.
>    (5) Aligned params with '(' in function kirin_apb_ctrl_writel and several others.
> 2. Fix the issues that compitable value in Documentation was different with .dtsi file.
> 3. For dependance during compiling, the dtsi patch is deleted, and it was merged in patch[1].
> 4. The indent style issues will be pull with MSI-patch in the next weeks;
> 
> patch[1]: https://www.spinics.net/lists/arm-kernel/msg588944.html
> 
> =========================
> Changes between V8 and V7
> =========================
> 1. Fix the indent issues in Documentation, dtsi file and macro defination.
> 2. Replace pdev->dev with dev in kirin_pcie_get_resource and 
>    kirin_pcie_get_clk functions.
> 3. Put variables "pci" and "kirin_pcie" to be initialized at first
>    in kirin_pcie_wr_own_config, kirin_pcie_read_dbi and other functions.
> 4. Add space before blankets in "Low power mode(L1 ".
> 5. Short the Makefile sentence to lower than 80 characters
>    and delete reduntant words.
> 6. Use word 'located' instead of the wrong one 'lacated'.
> 7. Fix the problem of return value type.
> 
> Changes between V8 and V7
> =========================
> 1. Replace 'reset-gpios' of 'reset-gpio' in Documentation.
> 
> Changes between V7 and V6
> =========================
> 1. add enumeration log Based on Hikey960 Board with these patches.
> 2. fix issues as fellows:
>    (1) delete reduntant blankets in macro defination,
>    (2) add blank line in  kirin_pcie_clk_ctrl function.
>    (3) Fix compitable property in DT with the SoC name,
>        for example "hisilicon,kirin960-pcie".
> 
> Changes between V6 and V4
> =========================
> 1. seperate Document from .dtsi patch.
> 2. fix issues according to review comments
>    from Bjorn Helgaas and Rob Herring: annotation stype, DT node,
>    patch post method and so on.
> 
> Enumeration log
> ===============
> These test logs come from patches running on Hikey960 Board
> (1) Connect with Atheros Communications WIFI
> 	OF: PCI: host bridge /soc/kirin_pcie_rc@f4000000 ranges:
> 	OF: PCI:   MEM 0xf6000000..0xf7ffffff -> 0x00000000
> 	kirin-pcie f4000000.kirin_pcie_rc: PCI host bridge to bus 0000:00
> 	pci_bus 0000:00: root bus resource [bus 00-01]
> 	pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] (bus address [0x00000000-0x01ffffff])
> 	pci 0000:00:00.0: [19e5:3660] type 01 class 0x060400
> 	pci 0000:00:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
> 	pci 0000:00:00.0: supports D1 D2
> 	pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
> 	pci 0000:01:00.0: [168c:002a] type 00 class 0x028000
> 	pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf600ffff 64bit]
> 	pci 0000:01:00.0: supports D1
> 	pci 0000:01:00.0: PME# supported from D0 D1 D3hot
> 	pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
> 	pci 0000:00:00.0: BAR 0: assigned [mem 0xf6000000-0xf6ffffff]
> 	pci 0000:00:00.0: BAR 14: assigned [mem 0xf7000000-0xf70fffff]
> 	pci 0000:01:00.0: BAR 0: assigned [mem 0xf7000000-0xf700ffff 64bit]
> 	pci 0000:00:00.0: PCI bridge to [bus 01]
> 	pci 0000:00:00.0:   bridge window [mem 0xf7000000-0xf70fffff]
> 	pcieport 0000:00:00.0: Signaling PME with IRQ 276
> 	pcieport 0000:00:00.0: AER enabled with IRQ 276	 
> 
> 
> Xiaowei Song (3):
>   PCI: hisi: Add DT binding for PCIe of Kirin SoC series
>   PCI: dwc: kirin: add PCIe Driver for HiSilicon Kirin SoC
>   ARM4: defconfig: Enable  Kirin PCIe
> 
>  .../devicetree/bindings/pci/kirin-pcie.txt         |  55 +++
>  arch/arm64/configs/defconfig                       |   1 +
>  drivers/pci/dwc/Kconfig                            |  10 +
>  drivers/pci/dwc/Makefile                           |   1 +
>  drivers/pci/dwc/pcie-kirin.c                       | 518 +++++++++++++++++++++
>  5 files changed, 585 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
>  create mode 100644 drivers/pci/dwc/pcie-kirin.c
> 
> -- 
> 2.11.GIT
>