[PATCH v2 0/5] Add SoM1 support

From: Claudiu Beznea
Date: Mon Jul 03 2017 - 10:43:47 EST

Hi all,

This series adds support for sama5d2 SoM1 devices.

The at91-sama5d27_som1.dtsi add specific bindings for SoM1 board.
The at91-sama5d27_som1_ek.dts add specific bindings for SoM1 EK board.

The sama5d27_som1_ek uses a EEPROM binding, "start-offset", which is
introduced in patch series: "[RFC PATCH 0/3] Add at24 functionality to
read form different EEPROM offsets".

Thank you,

Changes in v2:
o in at91-sama5d27_som1.dtsi:
- increase bootloader and kernel size in flash map (with bootloader
flash offset the dtb and kernel flash offsets were changed)
- use right pin for ethernet-phy interrupt

o in at91-sama5d27_som1_ek.dts:
- removed memory tag and rely on bootloader to fill the right value
- use pin macros (from arch/arm/boot/dts/sama5d2-pinfunc.h) wherever
posible instead of pin numbers
- remove pinctrl_sensor_power and pinctrl_sensor_reset pin muxing
since they are not of intereset for this board
- use "pb4" label for user button instead of "bp1"

Claudiu Beznea (2):
ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support
ARM: dts: sama5d27_som1_ek: Add sama5d27 SoM1 EK support

Cristian Birsan (1):
drivers: soc: atmel: Add basic support for new sama5d2 SiPs

Cyrille Pitchen (1):
ARM: dts: at91: sama5d2: add QSPI nodes

Songjun Wu (1):
ARM: dts: at91: sama5d2: add isc node

arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 178 +++++++++
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 551 ++++++++++++++++++++++++++++
arch/arm/boot/dts/sama5d2.dtsi | 38 ++
drivers/soc/atmel/soc.c | 8 +
drivers/soc/atmel/soc.h | 4 +
6 files changed, 780 insertions(+)
create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1.dtsi
create mode 100644 arch/arm/boot/dts/at91-sama5d27_som1_ek.dts