Re: [PATCH] iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
From: Jonathan Cameron
Date: Tue Jul 04 2017 - 15:30:15 EST
On Mon, 3 Jul 2017 23:19:45 +0200
Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> On Mon, Jul 03, 2017 at 03:09:26PM +0200, Quentin Schulz wrote:
> > When initializing interrupts, the devm_request_any_context_irq will
> > enable them right away. An atomic flag was set in sun4i_irq_init and read
> > in the interrupt handler to make sure no unwanted interrupts were
> > handled. If an unwanted interrupt occurred, the handler would disable
> > the irq and return IRQ_HANDLED. However, at the end of sun4i_irq_init,
> > the irq would be disabled as well, resulting in an unbalanced enable
> > (since there are more disables than enables, the code enabling the
> > interrupt would never be called).
> > When reading the ADC or the temperature, the respective irq would be
> > enabled in the read function and disabled in the irq handler. In the
> > read function, we would wait for a completion (with a timeout) that will
> > be set in the irq handler. However, if the completion is never set or if
> > the wait for completion times out, the irq would not be disabled in the
> > read function resulting in an unbalanced enable once the read function
> > is called again (since there are 2+ enables for no disable).
> > Moving disable_irq from the irq handler to the read function get rid of
> > these two cases of unbalanced enable.
> > Fixes: d1caa9905538 ("iio: adc: add support for Allwinner SoCs ADC")
> > Reported-by: Andreas FÃrber <afaerber@xxxxxxx>
> > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Nice detailed explanation - thanks.
Applied to the fixes-togreg branch of iio.git.