[PATCH] PCI / PM: Fix native PME handling during system suspend/resume

From: Rafael J. Wysocki
Date: Wed Jul 05 2017 - 20:39:53 EST


From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

Commit 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from
suspend-to-idle) went too far with preventing pcie_pme_work_fn() from
clearing the root port's PME Status and re-enabling the PME interrupt
which should be done for PMEs to work correctly after system resume.

The failing scenario is as follows:

1. pcie_pme_suspend() finds that the PME IRQ should be designated
for system wakeup, so it calls enable_irq_wake() and then sets
data->suspend_level to PME_SUSPEND_WAKEUP.

2. PME interrupt happens at this point.

3. pcie_pme_irq() runs, disables the PME interrupt and queues up
the execution of pcie_pme_work_fn().

4. pcie_pme_work_fn() runs before pcie_pme_resume() and breaks out
of the loop right away, because data->suspend_level is not
PME_SUSPEND_NONE, and it doesn't re-enable the PME interrupt
for the same reason.

5. pcie_pme_resume() runs and simply calls disable_irq_wake()
without re-enabling the PME interrupt (because data->suspend_level
is not PME_SUSPEND_NONE), so the PME interrupt remains disabled
and the PME Status remains set.

To fix this notice that there is no reason why pcie_pme_work_fn()
should behave in a special way during system resume if the PME
interrupt is not disabled by pcie_pme_suspend() and partially revert
commit 76cde7e49590 and restore the previous (and correct) behavior
of pcie_pme_work_fn().

Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle)
Reported-by: Naresh Solanki <naresh.solanki@xxxxxxxxx>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
---
drivers/pci/pcie/pme.c | 35 +++++++++++++----------------------
1 file changed, 13 insertions(+), 22 deletions(-)

Index: linux-pm/drivers/pci/pcie/pme.c
===================================================================
--- linux-pm.orig/drivers/pci/pcie/pme.c
+++ linux-pm/drivers/pci/pcie/pme.c
@@ -40,17 +40,11 @@ static int __init pcie_pme_setup(char *s
}
__setup("pcie_pme=", pcie_pme_setup);

-enum pme_suspend_level {
- PME_SUSPEND_NONE = 0,
- PME_SUSPEND_WAKEUP,
- PME_SUSPEND_NOIRQ,
-};
-
struct pcie_pme_service_data {
spinlock_t lock;
struct pcie_device *srv;
struct work_struct work;
- enum pme_suspend_level suspend_level;
+ bool noirq; /* If set, keep the PME interrupt disabled. */
};

/**
@@ -228,7 +222,7 @@ static void pcie_pme_work_fn(struct work
spin_lock_irq(&data->lock);

for (;;) {
- if (data->suspend_level != PME_SUSPEND_NONE)
+ if (data->noirq)
break;

pcie_capability_read_dword(port, PCI_EXP_RTSTA, &rtsta);
@@ -255,7 +249,7 @@ static void pcie_pme_work_fn(struct work
spin_lock_irq(&data->lock);
}

- if (data->suspend_level == PME_SUSPEND_NONE)
+ if (!data->noirq)
pcie_pme_interrupt_enable(port, true);

spin_unlock_irq(&data->lock);
@@ -378,7 +372,7 @@ static int pcie_pme_suspend(struct pcie_
{
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
- bool wakeup, wake_irq_enabled = false;
+ bool wakeup;
int ret;

if (device_may_wakeup(&port->dev)) {
@@ -388,19 +382,16 @@ static int pcie_pme_suspend(struct pcie_
wakeup = pcie_pme_check_wakeup(port->subordinate);
up_read(&pci_bus_sem);
}
- spin_lock_irq(&data->lock);
if (wakeup) {
ret = enable_irq_wake(srv->irq);
- if (ret == 0) {
- data->suspend_level = PME_SUSPEND_WAKEUP;
- wake_irq_enabled = true;
- }
- }
- if (!wake_irq_enabled) {
- pcie_pme_interrupt_enable(port, false);
- pcie_clear_root_pme_status(port);
- data->suspend_level = PME_SUSPEND_NOIRQ;
+ if (!ret)
+ return 0;
}
+
+ spin_lock_irq(&data->lock);
+ pcie_pme_interrupt_enable(port, false);
+ pcie_clear_root_pme_status(port);
+ data->noirq = true;
spin_unlock_irq(&data->lock);

synchronize_irq(srv->irq);
@@ -417,15 +408,15 @@ static int pcie_pme_resume(struct pcie_d
struct pcie_pme_service_data *data = get_service_data(srv);

spin_lock_irq(&data->lock);
- if (data->suspend_level == PME_SUSPEND_NOIRQ) {
+ if (data->noirq) {
struct pci_dev *port = srv->port;

pcie_clear_root_pme_status(port);
pcie_pme_interrupt_enable(port, true);
+ data->noirq = false;
} else {
disable_irq_wake(srv->irq);
}
- data->suspend_level = PME_SUSPEND_NONE;
spin_unlock_irq(&data->lock);

return 0;