[PATCH v3 3/5] dt-bindings: stm32-dma: Add property to handle STM32 DMAMUX

From: Pierre-Yves MORDRET
Date: Thu Jul 06 2017 - 08:21:57 EST

This patch adds an optional property needed for STM32 DMA controller
addressed via STM32 DMAMUX.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@xxxxxxxxx>
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
Version history:
* None
* Typo fix
Documentation/devicetree/bindings/dma/stm32-dma.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 4408af6..340c918 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -16,6 +16,9 @@ Optional properties:
- resets: Reference to a reset controller asserting the DMA controller
- st,mem2mem: boolean; if defined, it indicates that the controller supports
memory-to-memory transfer
+- st,dmamux: boolean; if defined, it indicates that the controller is behind a
+ DMA multiplexer. In that case, using dma instances doesn't work for DMA
+ clients. They have to use dma-router instances.


@@ -39,7 +42,7 @@ Example:
* DMA client

DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
channel: a phandle to the DMA controller plus the following four integer cells:

1. The channel id