[PATCH 1/4] thermal: imx: Add nvmem-cells alternate binding for OCOTP access
From: Leonard Crestez
Date: Thu Jul 06 2017 - 09:22:40 EST
On newer imx SOCs accessing OCOTP directly is wrong because the ocotp
clock needs to be enabled first. Add a binding for accessing the same
values through the imx-ocotp nvmem driver using nvmem-cells. This is
similar to other thermal drivers.
The old binding is preserved for compatibility and because it still
works fine on imx6qdl series chips.
In theory this problem could be solved by adding a reference to the
OCOTP clock instead but it is better to hide such details in a specific
Signed-off-by: Leonard Crestez <leonard.crestez@xxxxxxx>
Documentation/devicetree/bindings/thermal/imx-thermal.txt | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt
index 3c67bd5..2842a05 100644
@@ -7,9 +7,16 @@ Required properties:
is higher than panic threshold, system will auto reboot by SRC module.
- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
control registers, e.g. ANATOP on imx6q.
+Properties for OCOTP access:
- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
calibration data, e.g. OCOTP on imx6q. The details about calibration data
can be found in SoC Reference Manual.
+- nvmem-cells: A phandle to the calibration cells provided by ocotp.
+- nvmem-cell-names: Should be "calib", "temp_grade".
+Direct access to OCOTP is deprecated, please use nvmem cells instead.
- clocks : thermal sensor's clock source.