[PATCH 01/13] dt-bindings: update the binding for Allwinner H3 DE2 support

[Icenowy Zheng]

Allwinner H3 features a "Display Engine 2.0".

Add device tree bindings for the following parts:
- H3 TCONs
- H3 Mixers
- H3 Display engine

Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
---
 .../bindings/display/sunxi/sun4i-drm.txt           | 25 ++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 2ee6ff0ef98e..92512953943e 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -87,18 +87,17 @@ Required properties:
    * allwinner,sun6i-a31-tcon
    * allwinner,sun6i-a31s-tcon
    * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-h3-tcon
    * allwinner,sun8i-v3s-tcon
  - reg: base address and size of memory-mapped region
  - interrupts: interrupt associated to this IP
  - clocks: phandles to the clocks feeding the TCON. Three are needed:
    - 'ahb': the interface clocks
-   - 'tcon-ch0': The clock driving the TCON channel 0
  - resets: phandles to the reset controllers driving the encoder
    - "lcd": the reset line for the TCON channel 0
 
  - clock-names: the clock names mentioned above
  - reset-names: the reset names mentioned above
- - clock-output-names: Name of the pixel clock created
 
 - ports: A ports node with endpoint definitions as defined in
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
@@ -112,7 +111,23 @@ Required properties:
   channel the endpoint is associated to. If that property is not
   present, the endpoint number will be used as the channel number.
 
-On SoCs other than the A33 and V3s, there is one more clock required:
+For the following compatibles:
+   * allwinner,sun5i-a13-tcon
+   * allwinner,sun6i-a31-tcon
+   * allwinner,sun6i-a31s-tcon
+   * allwinner,sun8i-a33-tcon
+   * allwinner,sun8i-v3s-tcon
+there is one more clock and one more property required:
+ - clocks:
+   - 'tcon-ch0': The clock driving the TCON channel 0
+ - clock-output-names: Name of the pixel clock created
+
+For the following compatibles:
+   * allwinner,sun5i-a13-tcon
+   * allwinner,sun6i-a31-tcon
+   * allwinner,sun6i-a31s-tcon
+   * allwinner,sun8i-h3-tcon
+there is one more clock required:
    - 'tcon-ch1': The clock driving the TCON channel 1
 
 DRC
@@ -207,6 +222,8 @@ supported.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun8i-v3s-de2-mixer
+    * allwinner,sun8i-h3-de2-mixer0
+    * allwinner,sun8i-h3-de2-mixer1
   - reg: base address and size of the memory-mapped region.
   - clocks: phandles to the clocks feeding the mixer
     * bus: the mixer interface clock
@@ -218,7 +235,6 @@ Required properties:
   Documentation/devicetree/bindings/media/video-interfaces.txt. The
   first port should be the input endpoints, the second one the output
 
-
 Display Engine Pipeline
 -----------------------
 
@@ -233,6 +249,7 @@ Required properties:
     * allwinner,sun6i-a31-display-engine
     * allwinner,sun6i-a31s-display-engine
     * allwinner,sun8i-a33-display-engine
+    * allwinner,sun8i-h3-display-engine
     * allwinner,sun8i-v3s-display-engine
 
   - allwinner,pipelines: list of phandle to the display engine
-- 
2.13.0