[PATCH v2 00/14] Hookup typec power-negotation to the PMIC and charger

From: Hans de Goede
Date: Tue Aug 15 2017 - 16:05:35 EST


Hi All,

This series implements a number of typec changes discussed a while back:

- It exports the negotiated voltage and max-current in the form of a
power-supply class device which represents the USB Type-C power-brick
(adapter/charger)
- It adds a power_supply_set_input_current_limit_from_supplier helper
function which charger drivers can use to get the max-current from
their supplier
- It adds regulator support to the charger IC on the device I've. The
exported regulator controls the 5v boost convertor which generates the
5V USB vbus which gets output when the Type-C port is in host / power-src
mode
- It adds a bunch of misc. related fixes and glue code to tie everything
together

One thing which was undecided in the previous discussion was how to make
port-controller drivers hookup to external ICs (e.g. a non Type-C aware PMIC)
to decect the input-current-limit for USB2 power-sources (through e.g. BC1.2
detection). Since a number of existing drivers, including the one for the
PMIC used on the 2 mini laptops I'm working on, already use the extcon
framework to communicate the detected USB2 charger-type, I've decided to
simply hook into this existing code. As this patch set shows this can be
done with zero changes to the existing PMIC/extcon drivers.

With this series the GPD win and GPD pocket mini laptops both fully
support any type of Type-C charging. When hooked up with:
-A -> C cable and plugged into a regular port they charge at 5V 0.5A
-A -> C cable and plugged into a dedictaed charger they charge at 5V 2A
-C -> C cable and plugged into a fixed 5V 3A charger, at 5V 3A
-C -> C cable and plugged into a PD capable charger, which delivers max 12V, 2A
they charge at 12V, 2A

And when a Type-C to USB-A receptacle (so host mode) cable gets plugged in
the port correctly supplies 5V to any plugged in USB-A peripherals.

This is v2 of this series, which has the following changes (see
changelog inside individual patches for details):

-Add "i2c: Allow overriding dev_name through board_info" patch, this is
necessary for getting stable dev_names which are necessary for specifying
regulator-mappings through regulator_init_data
-Use regulator_init_data to specify mapping, drop "staging: typec:
fusb302: Add support for fcs,vbus-regulator-name device-property" patch
-Merged helper code for port-c related extcon / power_supply handling
directly into the fusb302 patches using the code, rather then trying
to add generic helpers even though there is only 1 user

Patches 1-12 can be merged directly into their resp. subsystems,
patches 13 and 14 need to wait for the others to be merged first.

Regards,

Hans