[PATCH 1/2] hwmon: (ltq-cputemp) add cpu temp sensor for xrx200

[Florian Eckert]

Add the lantiq cpu temperature sensor support for xrx200.

Signed-off-by: Florian Eckert <fe@xxxxxxxxxx>
---
 drivers/hwmon/Kconfig       |   8 +++
 drivers/hwmon/Makefile      |   1 +
 drivers/hwmon/ltq-cputemp.c | 155 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 164 insertions(+)
 create mode 100644 drivers/hwmon/ltq-cputemp.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 5ef2814345ef..ed3f5e1d10cc 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -790,6 +790,14 @@ config SENSORS_LTC4261
 	  This driver can also be built as a module. If so, the module will
 	  be called ltc4261.
 
+config SENSORS_LTQ_CPUTEMP
+	bool "Lantiq cpu temperature sensor for xrx200"
+	depends on LANTIQ
+	default n
+	help
+	  If you say yes here you get support for the temperature
+	  sensor inside your xrx200 CPU.
+
 config SENSORS_MAX1111
 	tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 	depends on SPI_MASTER
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index d4641a9f16c1..c84d9784be98 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -110,6 +110,7 @@ obj-$(CONFIG_SENSORS_LTC4222)	+= ltc4222.o
 obj-$(CONFIG_SENSORS_LTC4245)	+= ltc4245.o
 obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
+obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
 obj-$(CONFIG_SENSORS_MAX1619)	+= max1619.o
diff --git a/drivers/hwmon/ltq-cputemp.c b/drivers/hwmon/ltq-cputemp.c
new file mode 100644
index 000000000000..a6f820533164
--- /dev/null
+++ b/drivers/hwmon/ltq-cputemp.c
@@ -0,0 +1,155 @@
+/* Lantiq cpu temperature sensor driver for xrx200
+ *
+ * Copyright (C) 2017 Florian Eckert <fe@xxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <lantiq_soc.h>
+
+/* gphy1 configuration register contains cpu temperature */
+#define CGU_GPHY1_CR   0x0040
+#define CGU_TEMP_PD    BIT(19)
+
+static void ltq_cputemp_enable(void)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR);
+
+	/* wait a short moment to let the SoC get the first temperatur value */
+	mdelay(100);
+}
+
+static void ltq_cputemp_disable(void)
+{
+	ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR);
+}
+
+static int ltq_cputemp_read(void)
+{
+	int value;
+
+	/* get the temperature including one decimal place */
+	value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF;
+	value = (value << 2) + value;
+
+	/* range -38 to +154 ÂC, register value zero is -38.0 ÂC */
+	value -= 380;
+
+	return value;
+}
+
+static ssize_t show_cputemp(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	int value;
+
+	value = ltq_cputemp_read();
+	/* scale temp to millidegree */
+	value = value * 100;
+
+	return sprintf(buf, "%d\n", value);
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL);
+
+static struct attribute *ltq_cputemp_attrs[] = {
+	&dev_attr_temp1_input.attr,
+	NULL
+};
+
+ATTRIBUTE_GROUPS(ltq_cputemp);
+
+static int ltq_cputemp_probe(struct platform_device *pdev)
+{
+	int value = 0;
+	int ret;
+	struct device *hwmon_dev;
+
+	/* available on vr9 v1.2 SoCs only */
+	if (ltq_soc_type() != SOC_TYPE_VR9_2)
+		return -ENODEV;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+							"CPU0",
+							NULL,
+							ltq_cputemp_groups);
+
+	if (IS_ERR(hwmon_dev)) {
+		dev_err(&pdev->dev, "Failed to register as hwmon device");
+		ret = PTR_ERR(hwmon_dev);
+		goto error_hwmon;
+	}
+
+	ltq_cputemp_enable();
+	value = ltq_cputemp_read();
+	dev_info(&pdev->dev,
+			"Current CPU die temperature: %d.%d ÂC",
+			value / 10,
+			value % 10);
+
+	return 0;
+
+error_hwmon:
+	return ret;
+}
+
+static int ltq_cputemp_release(struct platform_device *pdev)
+{
+	hwmon_device_unregister(&pdev->dev);
+	ltq_cputemp_disable();
+	return 0;
+}
+
+const struct of_device_id ltq_cputemp_match[] = {
+	{ .compatible = "lantiq,cputemp" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ltq_cputemp_match);
+
+static struct platform_driver ltq_cputemp_driver = {
+	.probe = ltq_cputemp_probe,
+	.remove = ltq_cputemp_release,
+	.driver = {
+		.name = "ltq-cputemp",
+		.owner = THIS_MODULE,
+		.of_match_table = ltq_cputemp_match,
+	},
+};
+
+int __init init_ltq_cputemp(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&ltq_cputemp_driver);
+	return ret;
+}
+
+void clean_ltq_cputemp(void)
+{
+	platform_driver_unregister(&ltq_cputemp_driver);
+}
+
+module_init(init_ltq_cputemp);
+module_exit(clean_ltq_cputemp);
+
+MODULE_AUTHOR("Florian Eckert <fe@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Lantiq Temperature Sensor");
+MODULE_LICENSE("GPL");
-- 
2.11.0