[PATCH v1] i2c:i2c-stm32f7: fix setup structure

From: Pierre-Yves MORDRET
Date: Thu Sep 21 2017 - 09:31:05 EST


I2C drive setup structure is not properly allocated.
Make it static instead of pointer to store driver data.

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxx>
---
drivers/i2c/busses/i2c-stm32f7.c | 15 ++++++---------
1 file changed, 6 insertions(+), 9 deletions(-)

diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index 47c67b0..42ebdb1 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -215,7 +215,7 @@ struct stm32f7_i2c_dev {
unsigned int msg_num;
unsigned int msg_id;
struct stm32f7_i2c_msg f7_msg;
- struct stm32f7_i2c_setup *setup;
+ struct stm32f7_i2c_setup setup;
struct stm32f7_i2c_timings timing;
};

@@ -537,7 +537,7 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
writel_relaxed(timing, i2c_dev->base + STM32F7_I2C_TIMINGR);

/* Enable I2C */
- if (i2c_dev->setup->analog_filter)
+ if (i2c_dev->setup.analog_filter)
stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
STM32F7_I2C_CR1_ANFOFF);
else
@@ -887,22 +887,19 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
}

setup = of_device_get_match_data(&pdev->dev);
- i2c_dev->setup->rise_time = setup->rise_time;
- i2c_dev->setup->fall_time = setup->fall_time;
- i2c_dev->setup->dnf = setup->dnf;
- i2c_dev->setup->analog_filter = setup->analog_filter;
+ i2c_dev->setup = *setup;

ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-rising-time-ns",
&rise_time);
if (!ret)
- i2c_dev->setup->rise_time = rise_time;
+ i2c_dev->setup.rise_time = rise_time;

ret = device_property_read_u32(i2c_dev->dev, "i2c-scl-falling-time-ns",
&fall_time);
if (!ret)
- i2c_dev->setup->fall_time = fall_time;
+ i2c_dev->setup.fall_time = fall_time;

- ret = stm32f7_i2c_setup_timing(i2c_dev, i2c_dev->setup);
+ ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
if (ret)
goto clk_free;

--
2.7.4