Re: [PATCH 00/10] ARM: bcm: Add support for Broadcom Hurricane 2 SoC

From: Jon Mason
Date: Tue Sep 26 2017 - 11:01:06 EST


On Mon, Sep 25, 2017 at 8:09 PM, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote:
> Hi all,
>
> This patch series adds basic (boot to prompt with essential peripherals
> working) support for Broadcom's Hurricane 2 SoC which is found in switching
> applications.
>
> This is also an iProc-family chip with a number of variations, including
> some in the clock controller that I have not been able to identify yet.
>
> Florian Fainelli (10):
> MAINTAINERS: Update Broadcom iProc regexp with Hurricane 2
> dt-bindings: Add documentation for Broadcom Hurricane 2 SoCs
> ARM: bcm: Add support for Broadcom Hurricane 2 SoC
> dt-bindings: Document Broadcom Hurricane 2 clocks
> clk: bcm: Add Broadcom Hurricane 2 clock support
> ARM: dts: Add Broadcom Hurricane 2 DTS include file
> ARM: debug: Add Hurricane 2 UART2 debug addresses
> dt-bindings: Add Ubiquiti Networks vendor prefix
> ARM: dts: Hurricane 2: Add basic support for Ubiquiti UniFi Switch 8
> ARM: multi_v7_defconfig: Enable CONFIG_ARCH_BCM_HR2
>
> .../devicetree/bindings/arm/bcm/brcm,hr2.txt | 14 +
> .../bindings/clock/brcm,iproc-clocks.txt | 14 +
> .../devicetree/bindings/vendor-prefixes.txt | 1 +
> MAINTAINERS | 1 +
> arch/arm/Kconfig.debug | 10 +-
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/bcm-hr2.dtsi | 368 +++++++++++++++++++++
> arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts | 85 +++++
> arch/arm/configs/multi_v7_defconfig | 1 +
> arch/arm/mach-bcm/Kconfig | 9 +
> arch/arm/mach-bcm/Makefile | 3 +
> arch/arm/mach-bcm/bcm_hr2.c | 25 ++
> drivers/clk/bcm/Kconfig | 9 +
> drivers/clk/bcm/Makefile | 1 +
> drivers/clk/bcm/clk-hr2.c | 27 ++
> 15 files changed, 569 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt
> create mode 100644 arch/arm/boot/dts/bcm-hr2.dtsi
> create mode 100644 arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
> create mode 100644 arch/arm/mach-bcm/bcm_hr2.c
> create mode 100644 drivers/clk/bcm/clk-hr2.c

The series looks good to me. Please feel free to add
Acked-by: Jon Mason <jon.mason@xxxxxxxxxxxx>

Thanks,
Jon


> --
> 2.14.1
>