Re: [PATCH v2 1/7] driver core: emit uevents when device is bound to a driver

[Dmitry Torokhov]

On Fri, Sep 29, 2017 at 07:40:15PM +0000, Ruhl, Michael J wrote:
> > -----Original Message-----
> > From: dan.j.williams@xxxxxxxxx [mailto:dan.j.williams@xxxxxxxxx] On
> > Behalf Of Dan Williams
> > Sent: Friday, September 29, 2017 3:37 PM
> > To: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>; Tejun Heo
> > <htejun@xxxxxxxxx>; Linux Kernel Mailing List <linux-
> > kernel@xxxxxxxxxxxxxxx>; Guenter Roeck <linux@xxxxxxxxxxxx>; Ruhl,
> > Michael J <michael.j.ruhl@xxxxxxxxx>
> > Subject: Re: [PATCH v2 1/7] driver core: emit uevents when device is bound
> > to a driver
> > 
> > On Wed, Jul 19, 2017 at 5:24 PM, Dmitry Torokhov
> > <dmitry.torokhov@xxxxxxxxx> wrote:
> > > There are certain touch controllers that may come up in either normal
> > > (application) or boot mode, depending on whether firmware/configuration
> > is
> > > corrupted when they are powered on. In boot mode the kernel does not
> > create
> > > input device instance (because it does not necessarily know the
> > > characteristics of the input device in question).
> > >
> > > Another number of controllers does not store firmware in a non-volatile
> > > memory, and they similarly need to have firmware loaded before input
> > device
> > > instance is created. There are also other types of devices with similar
> > > behavior.
> > >
> > > There is a desire to be able to trigger firmware loading via udev, but it
> > > has to happen only when driver is bound to a physical device (i2c or spi).
> > > These udev actions can not use ADD events, as those happen too early, so
> > we
> > > are introducing BIND and UNBIND events that are emitted at the right
> > > moment.
> > >
> > > Also, many drivers create additional driver-specific device attributes
> > > when binding to the device, to provide userspace with additional controls.
> > > The new events allow userspace to adjust these driver-specific attributes
> > > without worrying that they are not there yet.
> > >
> > > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> > 
> > Hi Dmitry,
> > 
> > Mike (cc'd) reports a regression with this change:
> > 
> > ---
> > 
> > Previously, if I did:
> > 
> > # rmmod hfi1
> > 
> > The driver would be removed.
> > 
> > With 4.14.0-rc2+, when I remove the driver, the PCI bus is
> > automatically re-probed and the driver re-loaded.
> > 
> > ---
> > 
> > A bisect points to commit 1455cf8dbfd0 "driver core: emit uevents when
> > device is bound to a driver". I'm sending this because I have this
> > mail in my archive, but I'll let Mike follow up with any other
> > details.
> 
> My test environment is RedHat 7.3 GA + 4.14.0-rc2 kernel.
> 
> Blacklisting the driver keeps it from being autoloaded, but this didn't seem correct.
> 
> With the 4.13.x branch this did not occur

Yeah, udev is being stupid. Either change ACTION=="remove" to
ACTION!="add" in /lib/udev/rules.d/80-drivers.rules or pick this patch:

https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git/commit/?h=driver-core-linus&id=6878e7de6af726de47f9f3bec649c3f49e786586

Thanks.

-- 
Dmitry