[PATCH v2 4/5] iio: adc: at91-sama5d2_adc: ack DRDY irq in direct mode

[Eugen Hristev]

Need to acknowledge DRDY irq in direct mode/ software
triggered mode. Otherwise, on the next conversion, overrun
flag will be raised, which is not a correct state.
This doesn't affect the functionality, but will generate
possible incorrect overrun reports.

Signed-off-by: Eugen Hristev <eugen.hristev@xxxxxxxxxxxxx>
---
 drivers/iio/adc/at91-sama5d2_adc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 7a9305a..7e51ecb 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -773,6 +773,9 @@ static int at91_adc_read_raw(struct iio_dev *indio_dev,
 		at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel));
 		at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel));
 
+		/* Needed to ACK the DRDY interruption */
+		at91_adc_readl(st, AT91_SAMA5D2_LCDR);
+
 		mutex_unlock(&st->lock);
 
 		iio_device_release_direct_mode(indio_dev);
-- 
2.7.4