[PATCH 3.10 051/139] usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe

From: Willy Tarreau
Date: Wed Nov 01 2017 - 17:40:47 EST


From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>

commit 6124607acc88fffeaadf3aacfeb3cc1304c87387 upstream.

This patch fixes an issue that the driver sets the BCLR bit of
{C,Dn}FIFOCTR register to 1 even when it's non-DCP pipe and
the FRDY bit of {C,Dn}FIFOCTR register is set to 1.

Fixes: e8d548d54968 ("usb: renesas_usbhs: fifo became independent from pipe.")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Signed-off-by: Willy Tarreau <w@xxxxxx>
---
drivers/usb/renesas_usbhs/fifo.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index 9564756..47a6ffa 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -261,11 +261,17 @@ static void usbhsf_fifo_clear(struct usbhs_pipe *pipe,
struct usbhs_fifo *fifo)
{
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
+ int ret = 0;

if (!usbhs_pipe_is_dcp(pipe))
- usbhsf_fifo_barrier(priv, fifo);
+ ret = usbhsf_fifo_barrier(priv, fifo);

- usbhs_write(priv, fifo->ctr, BCLR);
+ /*
+ * if non-DCP pipe, this driver should set BCLR when
+ * usbhsf_fifo_barrier() returns 0.
+ */
+ if (!ret)
+ usbhs_write(priv, fifo->ctr, BCLR);
}

static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv,
--
2.8.0.rc2.1.gbe9624a