[PATCH 3.18 47/67] mtd: nand: Fix writing mtdoops to nand flash.

[Greg Kroah-Hartman]

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brent Taylor <motobud@xxxxxxxxx>

commit 30863e38ebeb500a31cecee8096fb5002677dd9b upstream.

When mtdoops calls mtd_panic_write(), it eventually calls
panic_nand_write() in nand_base.c. In order to properly wait for the
nand chip to be ready in panic_nand_wait(), the chip must first be
selected.

When using the atmel nand flash controller, a panic would occur due to
a NULL pointer exception.

Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes")
Signed-off-by: Brent Taylor <motobud@xxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>


---
 drivers/mtd/nand/nand_base.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2501,15 +2501,18 @@ static int panic_nand_write(struct mtd_i
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd->priv;
+	int chipnr = (int)(to >> chip->chip_shift);
 	struct mtd_oob_ops ops;
 	int ret;
 
-	/* Wait for the device to get ready */
-	panic_nand_wait(mtd, chip, 400);
-
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);
 
+	chip->select_chip(mtd, chipnr);
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
 	ops.oobbuf = NULL;