[PATCH] usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issues

From: Gevorg Sahakyan
Date: Wed Dec 06 2017 - 09:09:45 EST


In host mode reading from DPTXSIZn returning invalid value in
dwc2_check_param_tx_fifo_sizes function.

In total TxFIFO size calculations unnecessarily reducing by ep_info.
hw->total_fifo_size can be fully allocated for FIFO's.

Added num_dev_in_eps member in dwc2_hw_params structure to save number
of IN EPs.

Added g_tx_fifo_size array in dwc2_hw_params structure to store power on
reset values of DPTXSIZn registers in forced device mode.

Updated dwc2_hsotg_tx_fifo_count() function to get TxFIFO count from
num_dev_in_eps.

Updated dwc2_get_dev_hwparams() function to store DPTXFSIZn in
g_tx_fifo_size array.

dwc2_get_host/dev_hwparams() functions call moved after num_dev_in_eps
set from hwcfg4.

Modified dwc2_check_param_tx_fifo_sizes() function to check TxFIFOn
sizes based on g_tx_fifo_size array.

Removed ep_info subtraction during calculation of tx_addr_max in
dwc2_hsotg_tx_fifo_total_depth() function. Also removed
dwc2_hsotg_ep_info_size() function as no more need.

Signed-off-by: Gevorg Sahakyan <sahakyan@xxxxxxxxxxxx>
Signed-off-by: Minas Harutyunyan <hminas@xxxxxxxxxxxx>
---
drivers/usb/dwc2/core.h | 4 ++++
drivers/usb/dwc2/gadget.c | 42 ++----------------------------------------
drivers/usb/dwc2/params.c | 29 +++++++++++++++++++----------
3 files changed, 25 insertions(+), 50 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 0f0c21cf0192..48aa5b4587e8 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -537,6 +537,7 @@ struct dwc2_core_params {
* 2 - Internal DMA
* @power_optimized Are power optimizations enabled?
* @num_dev_ep Number of device endpoints available
+ * @num_dev_in_eps Number of device IN endpoints available
* @num_dev_perio_in_ep Number of device periodic IN endpoints
* available
* @dev_token_q_depth Device Mode IN Token Sequence Learning Queue
@@ -565,6 +566,7 @@ struct dwc2_core_params {
* 2 - 8 or 16 bits
* @snpsid: Value from SNPSID register
* @dev_ep_dirs: Direction of device endpoints (GHWCFG1)
+ * @g_tx_fifo_size[] Power-on values of TxFIFO sizes
*/
struct dwc2_hw_params {
unsigned op_mode:3;
@@ -586,12 +588,14 @@ struct dwc2_hw_params {
unsigned fs_phy_type:2;
unsigned i2c_enable:1;
unsigned num_dev_ep:4;
+ unsigned num_dev_in_eps : 4;
unsigned num_dev_perio_in_ep:4;
unsigned total_fifo_size:16;
unsigned power_optimized:1;
unsigned utmi_phy_data_width:2;
u32 snpsid;
u32 dev_ep_dirs;
+ u32 g_tx_fifo_size[MAX_EPS_CHANNELS];
};

/* Size of control and EP0 buffers */
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 66be52bde8da..edc1f26e627e 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -195,55 +195,18 @@ int dwc2_hsotg_tx_fifo_count(struct dwc2_hsotg *hsotg)
{
if (hsotg->hw_params.en_multiple_tx_fifo)
/* In dedicated FIFO mode we need count of IN EPs */
- return (dwc2_readl(hsotg->regs + GHWCFG4) &
- GHWCFG4_NUM_IN_EPS_MASK) >> GHWCFG4_NUM_IN_EPS_SHIFT;
+ return hsotg->hw_params.num_dev_in_eps;
else
/* In shared FIFO mode we need count of Periodic IN EPs */
return hsotg->hw_params.num_dev_perio_in_ep;
}

-/**
- * dwc2_hsotg_ep_info_size - return Endpoint Info Control block size in DWORDs
- */
-static int dwc2_hsotg_ep_info_size(struct dwc2_hsotg *hsotg)
-{
- int val = 0;
- int i;
- u32 ep_dirs;
-
- /*
- * Don't need additional space for ep info control registers in
- * slave mode.
- */
- if (!using_dma(hsotg)) {
- dev_dbg(hsotg->dev, "Buffer DMA ep info size 0\n");
- return 0;
- }
-
- /*
- * Buffer DMA mode - 1 location per endpoit
- * Descriptor DMA mode - 4 locations per endpoint
- */
- ep_dirs = hsotg->hw_params.dev_ep_dirs;
-
- for (i = 0; i <= hsotg->hw_params.num_dev_ep; i++) {
- val += ep_dirs & 3 ? 1 : 2;
- ep_dirs >>= 2;
- }
-
- if (using_desc_dma(hsotg))
- val = val * 4;
-
- return val;
-}
-
/**
* dwc2_hsotg_tx_fifo_total_depth - return total FIFO depth available for
* device mode TX FIFOs
*/
int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
{
- int ep_info_size;
int addr;
int tx_addr_max;
u32 np_tx_fifo_size;
@@ -252,8 +215,7 @@ int dwc2_hsotg_tx_fifo_total_depth(struct dwc2_hsotg *hsotg)
hsotg->params.g_np_tx_fifo_size);

/* Get Endpoint Info Control block size in DWORDs. */
- ep_info_size = dwc2_hsotg_ep_info_size(hsotg);
- tx_addr_max = hsotg->hw_params.total_fifo_size - ep_info_size;
+ tx_addr_max = hsotg->hw_params.total_fifo_size;

addr = hsotg->params.g_rx_fifo_size + np_tx_fifo_size;
if (tx_addr_max <= addr)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 9c3ff66a2eb8..90d482c16094 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -484,8 +484,7 @@ static void dwc2_check_param_tx_fifo_sizes(struct dwc2_hsotg *hsotg)
}

for (fifo = 1; fifo <= fifo_count; fifo++) {
- dptxfszn = (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) &
- FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT;
+ dptxfszn = hsotg->hw_params.g_tx_fifo_size[fifo];

if (hsotg->params.g_tx_fifo_size[fifo] < min ||
hsotg->params.g_tx_fifo_size[fifo] > dptxfszn) {
@@ -604,6 +603,7 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
{
struct dwc2_hw_params *hw = &hsotg->hw_params;
u32 gnptxfsiz;
+ int fifo, fifo_count;

if (hsotg->dr_mode == USB_DR_MODE_HOST)
return;
@@ -612,6 +612,14 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)

gnptxfsiz = dwc2_readl(hsotg->regs + GNPTXFSIZ);

+ fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
+
+ for (fifo = 1; fifo <= fifo_count; fifo++) {
+ hw->g_tx_fifo_size[fifo] =
+ (dwc2_readl(hsotg->regs + DPTXFSIZN(fifo)) &
+ FIFOSIZE_DEPTH_MASK) >> FIFOSIZE_DEPTH_SHIFT;
+ }
+
hw->dev_nperio_tx_fifo_size = (gnptxfsiz & FIFOSIZE_DEPTH_MASK) >>
FIFOSIZE_DEPTH_SHIFT;
}
@@ -653,14 +661,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hwcfg4 = dwc2_readl(hsotg->regs + GHWCFG4);
grxfsiz = dwc2_readl(hsotg->regs + GRXFSIZ);

- /*
- * Host specific hardware parameters. Reading these parameters
- * requires the controller to be in host mode. The mode will
- * be forced, if necessary, to read these values.
- */
- dwc2_get_host_hwparams(hsotg);
- dwc2_get_dev_hwparams(hsotg);
-
/* hwcfg1 */
hw->dev_ep_dirs = hwcfg1;

@@ -703,6 +703,8 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN);
hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >>
GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
+ hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >>
+ GHWCFG4_NUM_IN_EPS_SHIFT;
hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA);
hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ);
hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >>
@@ -711,6 +713,13 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
/* fifo sizes */
hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
GRXFSIZ_DEPTH_SHIFT;
+ /*
+ * Host specific hardware parameters. Reading these parameters
+ * requires the controller to be in host mode. The mode will
+ * be forced, if necessary, to read these values.
+ */
+ dwc2_get_host_hwparams(hsotg);
+ dwc2_get_dev_hwparams(hsotg);

return 0;
}
--
2.11.0