Re: [PATCH 1/2] drm/nouveau/bar/gf100: fix hang when calling ->fini() before ->init()

From: Jon Hunter
Date: Wed Dec 06 2017 - 12:18:12 EST



On 06/12/17 09:22, Guillaume Tucker wrote:
> On 05/12/17 18:32, Ben Skeggs wrote:
>> On Wed, Dec 6, 2017 at 12:30 AM, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
>>
>>>
>>> On 04/12/17 18:37, Guillaume Tucker wrote:
>>>> If the firmware fails to load then ->fini() will be called before the
>>>> device has been initialised, causing the kernel to hang while trying
>>>> to write to a register. Add a test in ->fini() to avoid this issue.
>>>>
>>>> This fixes a kernel hang on tegra124.
>>>>
>>>> Fixes: b17de35a2ebbe ("drm/nouveau/bar: implement bar1 teardown")
>>>> Signed-off-by: Guillaume Tucker <guillaume.tucker@xxxxxxxxxxxxx>
>>>> CC: Ben Skeggs <bskeggs@xxxxxxxxxx>
>>>> ---
>>>> Âdrivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c | 7 +++++--
>>>> Â1 file changed, 5 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
>>> b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
>>>> index a3ba7f50198b..95e2aba64aad 100644
>>>> --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
>>>> +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bar/gf100.c
>>>> @@ -43,9 +43,12 @@ gf100_bar_bar1_wait(struct nvkm_bar *base)
>>>> Â}
>>>>
>>>> Âvoid
>>>> -gf100_bar_bar1_fini(struct nvkm_bar *bar)
>>>> +gf100_bar_bar1_fini(struct nvkm_bar *base)
>>>> Â{
>>>> -ÂÂÂÂ nvkm_mask(bar->subdev.device, 0x001704, 0x80000000, 0x00000000);
>>>> +ÂÂÂÂ struct nvkm_device *device = base->subdev.device;
>>>> +
>>>> +ÂÂÂÂ if (base->subdev.oneinit)
>>>> +ÂÂÂÂÂÂÂÂÂÂÂÂ nvkm_mask(device, 0x001704, 0x80000000, 0x00000000);
>>>> Â}
>>>>
>>>> Âvoid
>>>
>>> I have tested this and it works for me. Thanks for fixing this! Would be
>>> good to get Ben's ACK, but you can have my ...
>>>
>> I'd love to get a good explanation as to why it hangs without this
>> change,
>> as, on the surface, it's not immediately obvious as to why it's hanging.
>
> To be fair I'm not entirely sure either why this causes a hang, I
> haven't read the TRM... The iomem has been mapped at this point,
> so accessing the register should work. One clue is when you look
> at _bar1_init(), the 0x1704 register is initialised with
> some (device instance?) memory address. So it's possible that
> the hardware does something special when you set this to 0 as in
> _bar1_fini(), which may fail in particular if it was previously
> not initialised with a valid address.
>
> This is merely guesswork, would be interested to find out the
> real explanation though.

OK, well that's no good. It's a good pointer, but we need to make sure
we understand the root of this hang. I will see if I have sometime to
dig into this further, maybe next week.

Cheers
Jon

--
nvpublic