Re: [PATCH 5/5] phy: renesas: rcar-gen3-usb2: add gpio handling

From: Geert Uytterhoeven
Date: Wed Dec 13 2017 - 03:55:27 EST


Hi Shimoda-san,

On Wed, Dec 13, 2017 at 7:27 AM, Yoshihiro Shimoda
<yoshihiro.shimoda.uh@xxxxxxxxxxx> wrote:
> Some R-Car SoCs (e.g. R-Car D3) doesn't have dedicated pins of VBUS
> and ID. So, they may be connected to gpio pins. To handle the gpio
> pins, this patch adds the handling of VBUS and ID pins instead of
> dedicated pins.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 +
> drivers/phy/renesas/phy-rcar-gen3-usb2.c | 77 ++++++++++++++++++++--
> 2 files changed, 72 insertions(+), 7 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> index 99b651b..851582f 100644
> --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
> @@ -27,6 +27,8 @@ channel as USB OTG:
> - interrupts: interrupt specifier for the PHY.
> - vbus-supply: Phandle to a regulator that provides power to the VBUS. This
> regulator will be managed during the PHY power on/off sequence.
> +- renesas,vbus-gpios: use gpio to control vbus instead of dedicated pin.
> +- renesas,id-gpios: use gpio to detect id instead of dedicated pin.

Documentation/devicetree/bindings/phy/brcm,ns2-drd-phy.txt already uses
"vbus-gpios" and "id-gpios" without vendor-specific prefixes, so perhaps
the "renesas," can be dropped?

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds