Re: [PATCH -next v3 2/2] mtd: nand: toshiba: Add support for Toshiba Memory BENAND (Built-in ECC NAND)

[KOBAYASHI Yoshitake]

Thanks for reviewing the patches and taht is a good news for me about nand_exec_op().
I'll change this patch as you suggested.
I would like to make sure the following one.

>> @@ -70,6 +155,10 @@ static int toshiba_nand_init(struct nand_chip *chip)
>>  	if (nand_is_slc(chip))
>>  		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
>>  
>> +	if (nand_is_slc(chip) && (chip->id.data[4] & 0x80) /* BENAND */ &&
>> +	    (chip->ecc.mode == NAND_ECC_ON_DIE))
>> +		toshiba_nand_benand_init(chip);
>> +
> 
> Please move this block to toshiba_nand_init().

I think it's already in toshiba_nand_init().

-- YOSHI


On 2017/12/07 0:24, Boris Brezillon wrote:
> On Wed,  6 Dec 2017 23:04:58 +0900
> KOBAYASHI Yoshitake <yoshitake.kobayashi@xxxxxxxxxxxxx> wrote:
> 
>> This patch enables support for Toshiba Memory BENAND. This checks
>> internal ECC status in read operation when using BENAND and selecting
>> ECC mode as on-die.
>>
>> Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@xxxxxxxxxxxxx>
>> ---
>>  drivers/mtd/nand/nand_toshiba.c | 89 +++++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 89 insertions(+)
>>
>> diff --git a/drivers/mtd/nand/nand_toshiba.c b/drivers/mtd/nand/nand_toshiba.c
>> index c2c141b..35c0ddf 100644
>> --- a/drivers/mtd/nand/nand_toshiba.c
>> +++ b/drivers/mtd/nand/nand_toshiba.c
>> @@ -17,6 +17,91 @@
>>  
>>  #include <linux/mtd/rawnand.h>
>>  
>> +/* ECC Status Read Command for BENAND */
>> +#define TOSHIBA_NAND_CMD_ECC_STATUS	0x7A
>> +
>> +/* Recommended to rewrite for BENAND */
>> +#define TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED	BIT(3)
>> +
>> +static int toshiba_nand_benand_status_chk(struct mtd_info *mtd,
>> +					  struct nand_chip *chip)
>> +{
>> +	unsigned int max_bitflips = 0;
>> +	u8 status;
>> +
>> +	/* Check Read Status */
>> +	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
>> +	status = chip->read_byte(mtd);
> 
> Please use the recently introduced nand_status_op() helper.
> 
>> +
>> +	/*
>> +	 * TOSHIBA_NAND_CMD_ECC_STATUS is vendor specific command.
>> +	 * Currently we have no way to send arbitrary sequences of
>> +	 * CMD+ADDR+DATA cycles and thus cannot support this custom
>> +	 * TOSHIBA_NAND_CMD_ECC_STATUS operation.
> 
> That's about to change :-), if everything goes well, nand_exec_op()
> should be available in 4.16.
> 
>> +	 * For now, we set max_bitflips mtd->bitflip_threshold.
>> +	 */
>> +	if (status & NAND_STATUS_FAIL) {
>> +		/* uncorrectable */
>> +		mtd->ecc_stats.failed++;
>> +	} else if (status & TOSHIBA_NAND_STATUS_REWRITE_RECOMMENDED) {
>> +		/* correctable */
>> +		max_bitflips = mtd->bitflip_threshold;
>> +		mtd->ecc_stats.corrected += max_bitflips;
>> +	}
>> +
>> +	return max_bitflips;
>> +}
>> +
>> +static int
>> +toshiba_nand_read_page_benand(struct mtd_info *mtd,
>> +			      struct nand_chip *chip, uint8_t *buf,
>> +			      int oob_required, int page)
>> +{
>> +	nand_read_page_raw(mtd, chip, buf, oob_required, page);
> 
> Please check the return code of nand_read_page_raw().
> 
>> +
>> +	return toshiba_nand_benand_status_chk(mtd, chip);
>> +}
>> +
>> +static int
>> +toshiba_nand_read_subpage_benand(struct mtd_info *mtd,
>> +				 struct nand_chip *chip, uint32_t data_offs,
>> +				 uint32_t readlen, uint8_t *bufpoi, int page)
>> +{
>> +	uint8_t *p;
>> +
>> +	if (data_offs != 0)
>> +		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_offs, -1);
>> +
>> +	p = bufpoi + data_offs;
>> +	chip->read_buf(mtd, p, readlen);
> 
> The core is no longer sending the initial READ0 command, so this should
> be turned into:
> 
> 	ret = nand_read_page_op(chip, data_offs, bufpoi + data_offs,
> 				readlen);
> 	if (ret)
> 		return ret;
> 		
> 
>> +
>> +	return toshiba_nand_benand_status_chk(mtd, chip);
>> +}
>> +
>> +static void toshiba_nand_benand_init(struct nand_chip *chip)
>> +{
>> +	struct mtd_info *mtd = nand_to_mtd(chip);
>> +
>> +	/*
>> +	 * On BENAND, the entire OOB region can be used by the MTD user.
>> +	 * The calculated ECC bytes are stored into other isolated
>> +	 * area which is not accessible to users.
>> +	 * This is why chip->ecc.bytes = 0.
>> +	 */
>> +	chip->ecc.bytes = 0;
>> +	chip->ecc.size = 512;
>> +	chip->ecc.strength = 8;
>> +	chip->ecc.read_page = toshiba_nand_read_page_benand;
>> +	chip->ecc.read_subpage = toshiba_nand_read_subpage_benand;
>> +	chip->ecc.write_page = nand_write_page_raw;
>> +	chip->ecc.read_page_raw = nand_read_page_raw;
>> +	chip->ecc.write_page_raw = nand_write_page_raw;
>> +
>> +	chip->options |= NAND_SUBPAGE_READ;
>> +
>> +	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
>> +}
>> +
>>  static void toshiba_nand_decode_id(struct nand_chip *chip)
>>  {
>>  	struct mtd_info *mtd = nand_to_mtd(chip);
>> @@ -70,6 +155,10 @@ static int toshiba_nand_init(struct nand_chip *chip)
>>  	if (nand_is_slc(chip))
>>  		chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
>>  
>> +	if (nand_is_slc(chip) && (chip->id.data[4] & 0x80) /* BENAND */ &&
>> +	    (chip->ecc.mode == NAND_ECC_ON_DIE))
>> +		toshiba_nand_benand_init(chip);
>> +
> 
> Please move this block to toshiba_nand_init().
> 
>>  	return 0;
>>  }
>>  
> 
> 
>