lapic-related boot crash in 4.15-rc1

From: Meelis Roos
Date: Wed Jan 10 2018 - 06:31:24 EST


On 3 of my test computers, boot hangs with 4.15 git kernels. So far I
have traced it down to 4.14.0 being good and 4.15-rc1 being bad (bisect
is slow because the computers are somwehat remote). Also because of
trying to find when it started, I have not tries newer than rc5
kernels.

The hang happens after Performance Events feature table has been printed
but before APIC initialization messages normally appear ("Enabling APIC
mode: Flat. Using 0 I/O APICs" or something like that).

It happens on at least 3 distinct computers:
* AMD Athlon with AMD 750 chipset
* P3 1 GHz with i815 chipset
* P4 1.7 GHz with SiS chipset

They all have have "lapic" parameter because they were telling me that
lapic has been disabled by BIOS and I re-enabled it with the parameter
to get apic timer interrupts. This worked up until 4.14.

None of the computers have IO-APICs.

Here is 4.14.0 dmesg from the AMD one.

[ 0.000000] Linux version 4.14.0 (mroos@amd750) (gcc version 7.2.1 20171025 (Debian 7.2.0-12)) #29 Mon Nov 13 23:55:12 EET 2017
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000002ffe0000-0x000000002fff7fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000002fff8000-0x000000002fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] random: fast init done
[ 0.000000] Legacy DMI 2.3 present.
[ 0.000000] DMI: Gateway /2222222222222222222222222222222, BIOS 0AASNP06 07/23/1999
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x2ffe0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF ?
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF ?
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF ?
[ 0.000000] F0000-FFFFF ?
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF8000000 write-back
[ 0.000000] 1 base 008000000 mask FF8000000 write-back
[ 0.000000] 2 base 010000000 mask FF8000000 write-back
[ 0.000000] 3 base 018000000 mask FF8000000 write-back
[ 0.000000] 4 base 020000000 mask FF8000000 write-back
[ 0.000000] 5 base 028000000 mask FF8000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FAE70 000014 (v00 AMI )
[ 0.000000] ACPI: RSDT 0x000000002FFF0000 000028 (v01 GATEWA 8DT-084 02111999 MSFT 0000000B)
[ 0.000000] ACPI: FACP 0x000000002FFF1000 000074 (v01 GATEWA 8DT-084 02111999 MSFT 0000000B)
[ 0.000000] ACPI: DSDT 0x000000002FFE0000 001BC0 (v01 GATEWA 8DT-084 00A82EAF MSFT 0100000B)
[ 0.000000] ACPI: FACS 0x000000002FFF8000 000040
[ 0.000000] 767MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2ffe0000
[ 0.000000] low ram: 0 - 2ffe0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000002ffdffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000002ffdffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000002ffdffff]
[ 0.000000] On node 0 totalpages: 196478
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1504 pages used for memmap
[ 0.000000] Normal zone: 192480 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x5008
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x30000000-0xfff7ffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 194942
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0 root=/dev/sda1 ro lapic
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 767500K/785912K available (6620K kernel code, 2894K rwdata, 992K rodata, 444K init, 296K bss, 18412K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
vmalloc : 0xf07e0000 - 0xfffa0000 ( 247 MB)
lowmem : 0xc0000000 - 0xeffe0000 ( 767 MB)
.init : 0xc1a52000 - 0xc1ac1000 ( 444 kB)
.data : 0xc1677110 - 0xc1a45b00 (3898 kB)
.text : 0xc1000000 - 0xc1677110 (6620 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=ef40c000 soft=ef40e000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.004000] tsc: Fast TSC calibration using PIT
[ 0.008000] tsc: Detected 848.387 MHz processor
[ 0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1696.77 BogoMIPS (lpj=3393548)
[ 0.008000] pid_max: default: 32768 minimum: 301
[ 0.008000] ACPI: Core revision 20170728
[ 0.013286] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.013386] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.013593] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.013682] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.014499] mce: CPU supports 4 MCE banks
[ 0.014617] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.014686] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.014752] CPU: AMD Athlon(tm) Processor (family: 0x6, model: 0x2, stepping: 0x2)
[ 0.015745] Performance Events: AMD PMU driver.
[ 0.015848] ... version: 0
[ 0.015911] ... bit width: 48
[ 0.015975] ... generic registers: 4
[ 0.016015] ... value mask: 0000ffffffffffff
[ 0.016083] ... max period: 00007fffffffffff
[ 0.016149] ... fixed-purpose events: 0
[ 0.016211] ... event mask: 000000000000000f
[ 0.016937] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.020000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.020000] devtmpfs: initialized
[ 0.020000] PM: Registering ACPI NVS region [mem 0x2fff8000-0x2fffffff] (32768 bytes)
[ 0.020000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.020000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.020000] NET: Registered protocol family 16
[ 0.020000] cpuidle: using governor ladder
[ 0.020000] cpuidle: using governor menu
[ 0.020000] ACPI: bus type PCI registered
[ 0.021322] PCI: PCI BIOS revision 2.10 entry at 0xfdad1, last bus=1
[ 0.021407] PCI: Using configuration type 1 for base access
[ 0.024613] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[ 0.025345] ACPI: Added _OSI(Module Device)
[ 0.025422] ACPI: Added _OSI(Processor Device)
[ 0.025488] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.025555] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.032474] ACPI: Interpreter enabled
[ 0.032653] ACPI: (supports S0 S1 S5)
[ 0.032721] ACPI: Using PIC for interrupt routing
[ 0.032931] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.033546] ACPI: Enabled 1 GPEs in block 00 to 0F
[ 0.047279] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.047386] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.047476] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.047562] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.048024] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.048033] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.048039] acpi PNP0A03:00: host bridge window [io 0x0d00-0x4fff window] (ignored)
[ 0.048045] acpi PNP0A03:00: host bridge window [io 0x5100-0xffff window] (ignored)
[ 0.048050] acpi PNP0A03:00: host bridge window [io 0x5000-0x507f] (ignored)
[ 0.048056] acpi PNP0A03:00: host bridge window [io 0x5080-0x50ff] (ignored)
[ 0.048062] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.048068] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[ 0.048074] acpi PNP0A03:00: host bridge window [mem 0x30000000-0xfff7ffff window] (ignored)
[ 0.048079] PCI: root bus 00: using default resources
[ 0.048257] PCI host bridge to bus 0000:00
[ 0.048338] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.048410] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.048485] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.048623] pci 0000:00:00.0: [1022:7006] type 00 class 0x060000
[ 0.048665] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[ 0.048675] pci 0000:00:00.0: reg 0x14: [mem 0xfebff000-0xfebfffff pref]
[ 0.048685] pci 0000:00:00.0: reg 0x18: [io 0xfff4-0xfff7]
[ 0.048953] pci 0000:00:01.0: [1022:7007] type 01 class 0x060400
[ 0.049222] pci 0000:00:07.0: [1022:7408] type 00 class 0x060100
[ 0.049497] pci 0000:00:07.1: [1022:7409] type 00 class 0x01018a
[ 0.049550] pci 0000:00:07.1: reg 0x20: [io 0xcb00-0xcb0f]
[ 0.049574] pci 0000:00:07.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.049653] pci 0000:00:07.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.049725] pci 0000:00:07.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.049798] pci 0000:00:07.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.050043] pci 0000:00:07.3: [1022:740b] type 00 class 0x068000
[ 0.050299] pci 0000:00:07.4: [1022:740c] type 00 class 0x0c0310
[ 0.050326] pci 0000:00:07.4: reg 0x10: [mem 0xffaff000-0xffafffff]
[ 0.050609] pci 0000:00:13.0: [1317:0985] type 00 class 0x020000
[ 0.050638] pci 0000:00:13.0: reg 0x10: [io 0xf800-0xf8ff]
[ 0.050652] pci 0000:00:13.0: reg 0x14: [mem 0xffafec00-0xffafefff]
[ 0.050691] pci 0000:00:13.0: reg 0x30: [mem 0xffac0000-0xffadffff pref]
[ 0.050739] pci 0000:00:13.0: supports D1 D2
[ 0.050746] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.050922] pci 0000:00:14.0: [1814:0301] type 00 class 0x028000
[ 0.050949] pci 0000:00:14.0: reg 0x10: [mem 0xffaf0000-0xffaf7fff]
[ 0.051290] pci 0000:01:05.0: [1002:5960] type 00 class 0x030000
[ 0.051318] pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.051331] pci 0000:01:05.0: reg 0x14: [io 0xe800-0xe8ff]
[ 0.051343] pci 0000:01:05.0: reg 0x18: [mem 0xff9f0000-0xff9fffff]
[ 0.051374] pci 0000:01:05.0: reg 0x30: [mem 0xff9c0000-0xff9dffff pref]
[ 0.051429] pci 0000:01:05.0: supports D1 D2
[ 0.051570] pci 0000:01:05.1: [1002:5940] type 00 class 0x038000
[ 0.051595] pci 0000:01:05.1: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
[ 0.051608] pci 0000:01:05.1: reg 0x14: [mem 0xff9e0000-0xff9effff]
[ 0.051684] pci 0000:01:05.1: supports D1 D2
[ 0.051807] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.051893] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.051901] pci 0000:00:01.0: bridge window [mem 0xff900000-0xff9fffff]
[ 0.051909] pci 0000:00:01.0: bridge window [mem 0xbea00000-0xdeafffff pref]
[ 0.051923] pci_bus 0000:00: on NUMA node 0
[ 0.053973] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.054318] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.054650] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.054976] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.055854] pci 0000:01:05.0: vgaarb: setting as boot VGA device
[ 0.055942] pci 0000:01:05.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.056021] pci 0000:01:05.0: vgaarb: bridge control possible
[ 0.056090] vgaarb: loaded
[ 0.056418] SCSI subsystem initialized
[ 0.056696] libata version 3.00 loaded.
[ 0.056883] PCI: Using ACPI for IRQ routing
[ 0.056969] PCI: pci_cache_line_size set to 32 bytes
[ 0.057024] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.057032] e820: reserve RAM buffer [mem 0x2ffe0000-0x2fffffff]
[ 0.057710] clocksource: Switched to clocksource refined-jiffies
[ 0.058115] pnp: PnP ACPI init
[ 0.058815] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.058905] system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.058980] system 00:00: [mem 0x2ffe0000-0x2fffffff] could not be reserved
[ 0.059056] system 00:00: [mem 0x00100000-0x2ffdffff] could not be reserved
[ 0.059156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.059686] system 00:01: [io 0xfff4-0xfff7] has been reserved
[ 0.059789] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.060031] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.060351] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.060694] pnp 00:04: [dma 2]
[ 0.060869] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.061705] pnp 00:05: [dma 0 disabled]
[ 0.061934] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.062750] pnp 00:06: [dma 0 disabled]
[ 0.063042] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.064283] pnp 00:07: [dma 3]
[ 0.064594] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.064849] pnp: PnP ACPI: found 8 devices
[ 0.106543] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.106669] clocksource: Switched to clocksource acpi_pm
[ 0.106796] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.106872] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.106953] pci 0000:00:01.0: bridge window [mem 0xff900000-0xff9fffff]
[ 0.107027] pci 0000:00:01.0: bridge window [mem 0xbea00000-0xdeafffff pref]
[ 0.107133] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.107140] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.107147] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.107153] pci_bus 0000:01: resource 1 [mem 0xff900000-0xff9fffff]
[ 0.107160] pci_bus 0000:01: resource 2 [mem 0xbea00000-0xdeafffff pref]
[ 0.107384] NET: Registered protocol family 2
[ 0.107950] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.107950] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.107950] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.107950] UDP hash table entries: 512 (order: 1, 8192 bytes)
[ 0.107950] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[ 0.107950] NET: Registered protocol family 1
[ 0.107950] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.107950] PCI: setting IRQ 10 as level-triggered
[ 0.188267] pci 0000:01:05.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.188387] PCI: CLS 32 bytes, default 32
[ 0.190290] workingset: timestamp_bits=30 max_order=18 bucket_order=0
[ 0.196504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.196624] io scheduler noop registered
[ 0.196891] io scheduler cfq registered (default)
[ 0.197609] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.218356] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.239135] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.243821] Floppy drive(s): fd0 is 1.44M
[ 0.245789] loop: module loaded
[ 0.246023] pata_amd 0000:00:07.1: version 0.4.1
[ 0.247922] scsi host0: pata_amd
[ 0.248415] scsi host1: pata_amd
[ 0.248657] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xcb00 irq 14
[ 0.248733] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xcb08 irq 15
[ 0.249050] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.249129] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.250317] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.251633] mousedev: PS/2 mouse device common for all mice
[ 0.252263] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.252388] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram
[ 0.253261] NET: Registered protocol family 10
[ 0.254511] Segment Routing with IPv6
[ 0.254660] mip6: Mobile IPv6
[ 0.254728] NET: Registered protocol family 17
[ 0.255106] Using IPI Shortcut mode
[ 0.255193] sched_clock: Marking stable (252028517, 0)->(354525111, -102496594)
[ 0.256395] console [netcon0] enabled
[ 0.256470] netconsole: network logging started
[ 0.256622] rtc_cmos 00:02: setting system clock to 2017-12-19 14:39:56 UTC (1513694396)
[ 0.263818] FDC 0 is a post-1991 82077
[ 0.275167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.415552] ata1.00: HPA detected: current 234375000, native 234441648
[ 0.415645] ata1.00: ATA-5: WDC WD1200JB-75CRA0, 16.06V16, max UDMA/100
[ 0.415718] ata1.00: 234375000 sectors, multi 16: LBA
[ 0.421361] ata1.00: configured for UDMA/66
[ 0.421965] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JB-75C 6V16 PQ: 0 ANSI: 5
[ 0.423325] sd 0:0:0:0: [sda] 234375000 512-byte logical blocks: (120 GB/112 GiB)
[ 0.423497] sd 0:0:0:0: [sda] Write Protect is off
[ 0.423576] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.423669] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.460915] sda: sda1 sda2 < sda5 >
[ 0.462326] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.582643] ata2.00: ATAPI: Optiarc DVD RW AD-7200A, 1.Z2, max UDMA/66
[ 0.587387] ata2.00: configured for UDMA/66
[ 0.589979] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.Z2 PQ: 0 ANSI: 5
[ 0.592119] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 0.592678] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 0.659889] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.660095] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[ 0.701919] devtmpfs: mounted
[ 0.704806] Freeing unused kernel memory: 444K
[ 0.705097] Write protecting the kernel text: 6624k
[ 0.705217] Write protecting the kernel read-only data: 1000k
[ 1.216024] tsc: Refined TSC clocksource calibration: 848.352 MHz
[ 1.216137] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xc3a7ed287a, max_idle_ns: 440795240030 ns
[ 2.034038] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 2.034867] systemd[1]: Detected architecture x86.
[ 2.077164] systemd[1]: Set hostname to <amd750>.
[ 2.272109] clocksource: Switched to clocksource tsc
[ 2.904779] systemd[1]: File /lib/systemd/system/systemd-journald.service:33 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.904972] systemd[1]: Proceeding WITHOUT firewalling in effect!
[ 2.945747] systemd[1]: File /lib/systemd/system/systemd-udevd.service:32 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 2.945929] systemd[1]: Proceeding WITHOUT firewalling in effect!
[ 3.138982] systemd[1]: File /lib/systemd/system/systemd-logind.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 3.139172] systemd[1]: Proceeding WITHOUT firewalling in effect!
[ 3.410651] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.851638] random: crng init done
[ 5.183694] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 5.454395] systemd-journald[60]: Received request to flush runtime journal from PID 1
[ 6.250310] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 6.250557] ACPI: Power Button [PWRF]
[ 6.568595] parport_pc 00:07: reported by Plug and Play ACPI
[ 6.568845] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 6.740449] ACPI: bus type USB registered
[ 6.740734] usbcore: registered new interface driver usbfs
[ 6.740861] usbcore: registered new interface driver hub
[ 6.741030] usbcore: registered new device driver usb
[ 6.795460] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.795752] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.802827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.812068] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.834083] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.834215] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.834808] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.881110] ehci-pci: EHCI PCI platform driver
[ 6.884466] Linux agpgart interface v0.103
[ 6.888600] ohci-pci: OHCI PCI platform driver
[ 6.889093] ohci-pci 0000:00:07.4: OHCI PCI host controller
[ 6.889204] ohci-pci 0000:00:07.4: new USB bus registered, assigned bus number 1
[ 6.889382] ohci-pci 0000:00:07.4: irq 10, io mem 0xffaff000
[ 6.948238] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.948342] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.948441] usb usb1: Product: OHCI PCI host controller
[ 6.948929] usb usb1: Manufacturer: Linux 4.14.0 ohci_hcd
[ 6.949008] usb usb1: SerialNumber: 0000:00:07.4
[ 6.950298] hub 1-0:1.0: USB hub found
[ 6.950415] hub 1-0:1.0: 4 ports detected
[ 6.951203] agpgart-amdk7 0000:00:00.0: AMD Irongate chipset
[ 7.049165] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 7.063182] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 7.314460] powernow_k7: No powernow capabilities detected
[ 7.571199] agpgart-amdk7 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 7.572259] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 7.572349] PCI: setting IRQ 9 as level-triggered
[ 7.572466] tulip: tulip_init_one: Enabled WOL support for AN983B
[ 7.572800] tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1
[ 7.573136] tulip0: MII transceiver #2 config 1000 status 786d advertising 05e1
[ 7.573470] tulip0: MII transceiver #3 config 1000 status 786d advertising 05e1
[ 7.573804] tulip0: MII transceiver #4 config 1000 status 786d advertising 05e1
[ 7.575329] net eth0: ADMtek Comet rev 17 at MMIO 0xffafec00, 00:50:22:12:58:b0, IRQ 9
[ 7.608817] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 7.608825] PCI: setting IRQ 5 as level-triggered
[ 7.614874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
[ 7.694992] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.213886] Adding 1574332k swap on /dev/sda5. Priority:-2 extents:1 across:1574332k
[ 8.333255] rt61pci 0000:00:14.0 wlp0s20: renamed from wlan0
[ 9.061402] [drm] radeon kernel modesetting enabled.
[ 9.068640] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 9.068739] PCI: setting IRQ 11 as level-triggered
[ 9.069788] [drm] initializing kernel modesetting (RV280 0x1002:0x5960 0x1458:0x4054 0x01).
[ 9.074889] agpgart-amdk7 0000:00:00.0: AGP 1.0 bridge
[ 9.075043] agpgart-amdk7 0000:00:00.0: putting AGP V2 device into 2x mode
[ 9.075155] radeon 0000:01:05.0: putting AGP V2 device into 2x mode
[ 9.075240] radeon 0000:01:05.0: GTT: 256M 0xE0000000 - 0xEFFFFFFF
[ 9.075324] [drm] Generation 2 PCI interface, using max accessible memory
[ 9.075409] radeon 0000:01:05.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
[ 9.075559] [drm] Detected VRAM RAM=128M, BAR=128M
[ 9.075630] [drm] RAM width 64bits DDR
[ 9.088074] [TTM] Zone kernel: Available graphics memory: 383972 kiB
[ 9.088171] [TTM] Initializing pool allocator
[ 9.088385] [drm] radeon: 128M of VRAM memory ready
[ 9.088459] [drm] radeon: 256M of GTT memory ready.
[ 9.091351] radeon 0000:01:05.0: WB disabled
[ 9.091738] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0xf07f3000
[ 9.091853] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.091924] [drm] Driver supports precise vblank timestamp query.
[ 9.092115] [drm] radeon: irq initialized.
[ 9.092186] [drm] Loading R200 Microcode
[ 9.301989] [drm] radeon: ring at 0x00000000E0001000
[ 9.302127] [drm] ring test succeeded in 0 usecs
[ 9.302737] [drm] ib test succeeded in 0 usecs
[ 9.304257] [drm] Radeon Display Connectors
[ 9.304333] [drm] Connector 0:
[ 9.304395] [drm] VGA-1
[ 9.304457] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 9.304524] [drm] Encoders:
[ 9.304586] [drm] CRT1: INTERNAL_DAC1
[ 9.304648] [drm] Connector 1:
[ 9.304709] [drm] DVI-D-1
[ 9.304769] [drm] HPD1
[ 9.304830] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 9.304897] [drm] Encoders:
[ 9.304958] [drm] DFP1: INTERNAL_TMDS1
[ 9.305021] [drm] Connector 2:
[ 9.305082] [drm] SVIDEO-1
[ 9.305142] [drm] Encoders:
[ 9.305204] [drm] TV1: INTERNAL_DAC2
[ 9.371280] [drm] fb mappable at 0xD0040000
[ 9.371373] [drm] vram apper at 0xD0000000
[ 9.371436] [drm] size 5242880
[ 9.371497] [drm] fb depth is 24
[ 9.371557] [drm] pitch is 5120
[ 9.374023] fbcon: radeondrmfb (fb0) is primary device
[ 9.456013] Console: switching to colour frame buffer device 160x64
[ 9.498034] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 9.498082] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:05.0 on minor 0
[ 17.121535] tulip 0000:00:13.0 eth0: tulip_stop_rxtx() failed (CSR5 0xfc664010 CSR6 0xff972113)
[ 17.121558] net eth0: Setting full-duplex based on MII#1 link partner capability of 41e1

$ cat /proc/interrupts
CPU0
0: 31 XT-PIC timer
1: 9 XT-PIC i8042
2: 0 XT-PIC cascade
6: 3 XT-PIC floppy
7: 3 XT-PIC parport0
8: 0 XT-PIC rtc0
9: 61095 XT-PIC acpi, eth0
10: 0 XT-PIC ohci_hcd:usb1
11: 0 XT-PIC radeon
14: 33806 XT-PIC pata_amd
15: 674268 XT-PIC pata_amd
NMI: 66 Non-maskable interrupts
LOC: 6116624 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 66 Performance monitoring interrupts
IWI: 5 IRQ work interrupts
RTR: 0 APIC ICR read retries
THR: 0 Threshold APIC interrupts
DFR: 0 Deferred Error APIC interrupts
MCE: 0 Machine check exceptions
MCP: 2184 Machine check polls
ERR: 0
MIS: 0
PIN: 0 Posted-interrupt notification event
NPI: 0 Nested posted-interrupt event
PIW: 0 Posted-interrupt wakeup event

dmesg from the P4 with 4.13 kernel:

[ 0.000000] random: get_random_bytes called from start_kernel+0x30/0x39c with crng_init=0
[ 0.000000] Linux version 4.13.0-1-686-pae (debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 6.4.0 20171026 (Debian 6.4.0-9)) #1 SMP Debian 4.13.10-1 (2017-10-30)
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000ec000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000fff0fffe] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] random: fast init done
[ 0.000000] Legacy DMI 2.3 present.
[ 0.000000] DMI: MSI MS-6547 /MS-6547 , BIOS 07.00T
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] 7 base 0E0000000 mask FFC000000 write-combining
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1ddfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x1da83000, 0x1da83fff] PGTABLE
[ 0.000000] BRK [0x1da84000, 0x1da85fff] PGTABLE
[ 0.000000] BRK [0x1da86000, 0x1da86fff] PGTABLE
[ 0.000000] BRK [0x1da87000, 0x1da87fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3ee1f000-0x3fffffff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3681d000-0x379fd36d]
[ 0.000000] Move RAMDISK from [mem 0x3ee1f000-0x3ffff36d] to [mem 0x3681d000-0x379fd36d]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI BIOS Error (bug): A valid RSDP was not found (20170531/tbxfroot-244)
[ 0.000000] 134MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000003fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fffffff]
[ 0.000000] On node 0 totalpages: 262046
[ 0.000000] free_area_init_node: node 0, pgdat dd827f80, node_mem_map f5f1d024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 34306 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] SFI: Simple Firmware Interface v0.81 http://simplefirmware.org
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000ebfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000ec000-0x000fffff]
[ 0.000000] e820: [mem 0x40000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 22 pages/cpu @f5f04000 s61004 r0 d29108 u90112
[ 0.000000] pcpu-alloc: s61004 r0 d29108 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260043
[ 0.000000] Kernel command line: BOOT_IMAGE=Linux ro root=803
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x37, date = 2003-06-04
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00040000)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1008916K/1048184K available (5959K kernel code, 627K rwdata, 1868K rodata, 800K init, 456K bss, 39268K reserved, 0K cma-reserved, 137224K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd16000 - 0xfffff000 (2980 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xdd852000 - 0xdd91a000 ( 800 kB)
.data : 0xdd5d1d0d - 0xdd843c00 (2503 kB)
.text : 0xdd000000 - 0xdd5d1d0d (5959 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] ftrace: allocating 27246 entries in 54 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS: 2304, nr_irqs: 32, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=f586a000 soft=f586c000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2000.114 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4000.22 BogoMIPS (lpj=8000456)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] Security Framework initialized
[ 0.004000] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004000] CPU0: Hyper-Threading is disabled
[ 0.008010] mce: CPU supports 4 MCE banks
[ 0.008090] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[ 0.008147] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[ 0.030079] Freeing SMP alternatives memory: 28K
[ 0.032237] smpboot: Max logical packages: 1
[ 0.032306] smpboot: weird, boot CPU (#0) not listed by the BIOS
[ 0.032360] smpboot: SMP motherboard not detected
[ 0.032413] smpboot: SMP disabled
[ 0.032465] smpboot: Local APIC not detected. Using dummy APIC emulation.
[ 0.032688] Performance Events: Netburst events,
[ 0.032704] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.032813] no hardware sampling interrupt available.
[ 0.032869] Netburst P4/Xeon PMU driver.
[ 0.032924] ... version: 0
[ 0.032975] ... bit width: 40
[ 0.033026] ... generic registers: 18
[ 0.033078] ... value mask: 000000ffffffffff
[ 0.033130] ... max period: 0000007fffffffff
[ 0.033183] ... fixed-purpose events: 0
[ 0.033234] ... event mask: 000000000003ffff
[ 0.033386] Hierarchical SRCU implementation.
[ 0.034393] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.034511] smp: Bringing up secondary CPUs ...
[ 0.034566] smp: Brought up 1 node, 1 CPU
[ 0.034619] smpboot: Total of 1 processors activated (4000.22 BogoMIPS)
[ 0.035034] devtmpfs: initialized
[ 0.035621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.035699] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.035865] pinctrl core: initialized pinctrl subsystem
[ 0.036175] NET: Registered protocol family 16
[ 0.036581] cpuidle: using governor ladder
[ 0.036636] cpuidle: using governor menu
[ 0.036745] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[ 0.036929] PCI: Using configuration type 1 for base access
[ 0.039059] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.039607] ACPI: Interpreter disabled.
[ 0.039803] vgaarb: loaded
[ 0.039960] EDAC MC: Ver: 3.0.0
[ 0.040232] PCI: Probing PCI hardware
[ 0.040289] PCI: root bus 00: using default resources
[ 0.040293] PCI: Probing PCI hardware (bus 00)
[ 0.040347] PCI host bridge to bus 0000:00
[ 0.040407] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.040464] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.040520] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.040610] pci 0000:00:00.0: [1039:0645] type 00 class 0x060000
[ 0.040634] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff]
[ 0.040795] pci 0000:00:01.0: [1039:0001] type 01 class 0x060400
[ 0.040915] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
[ 0.041012] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.041138] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
[ 0.041206] pci 0000:00:02.1: reg 0x20: [io 0x0c00-0x0c1f]
[ 0.041304] pci 0000:00:02.2: [1039:7001] type 00 class 0x0c0310
[ 0.041330] pci 0000:00:02.2: reg 0x10: [mem 0xdfffe000-0xdfffefff]
[ 0.041466] pci 0000:00:02.3: [1039:7001] type 00 class 0x0c0310
[ 0.041491] pci 0000:00:02.3: reg 0x10: [mem 0xdffff000-0xdfffffff]
[ 0.041640] pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
[ 0.041707] pci 0000:00:02.5: reg 0x20: [io 0xff00-0xff0f]
[ 0.041735] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.041793] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.041849] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.041905] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.042046] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
[ 0.042075] pci 0000:00:02.7: reg 0x10: [io 0xdc00-0xdcff]
[ 0.042088] pci 0000:00:02.7: reg 0x14: [io 0xd800-0xd87f]
[ 0.042179] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.042272] pci 0000:00:07.0: [1011:0009] type 00 class 0x020000
[ 0.042297] pci 0000:00:07.0: reg 0x10: [io 0xd400-0xd47f]
[ 0.042311] pci 0000:00:07.0: reg 0x14: [mem 0xdfffdf80-0xdfffdfff]
[ 0.042366] pci 0000:00:07.0: reg 0x30: [mem 0xdff80000-0xdffbffff pref]
[ 0.042531] pci 0000:01:00.0: [10de:0172] type 00 class 0x030000
[ 0.042556] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.042567] pci 0000:01:00.0: reg 0x14: [mem 0xd8000000-0xdbffffff pref]
[ 0.042578] pci 0000:01:00.0: reg 0x18: [mem 0xddc80000-0xddcfffff pref]
[ 0.042613] pci 0000:01:00.0: reg 0x30: [mem 0xdfee0000-0xdfefffff pref]
[ 0.042698] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.042757] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.042874] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.042935] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.042941] pci 0000:00:01.0: bridge window [mem 0xd5b00000-0xddcfffff pref]
[ 0.042955] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ 0.042998] pci 0000:00:02.0: SIS IRQ router [1039:0961]
[ 0.043076] PCI: pci_cache_line_size set to 64 bytes
[ 0.043122] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.043637] clocksource: Switched to clocksource pit
[ 0.064232] VFS: Disk quotas dquot_6.6.0
[ 0.064408] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.064717] AppArmor: AppArmor Filesystem Enabled
[ 0.064866] pnp: PnP ACPI: disabled
[ 0.064924] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.065011] PnPBIOS: Found PnP BIOS installation structure at 0xc00f74b0
[ 0.065067] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x645b, dseg 0xf0000
[ 0.065161] pnp 00:00: [io 0x0800-0x087f]
[ 0.065164] pnp 00:00: [io 0x0880-0x08ff]
[ 0.065167] pnp 00:00: [io 0x0c00-0x0c7f]
[ 0.065170] pnp 00:00: [io 0x0290-0x0297]
[ 0.065173] pnp 00:00: [io 0x0480-0x048f]
[ 0.065175] pnp 00:00: [io 0x04d0-0x04d1]
[ 0.065178] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.065181] pnp 00:00: [io 0x002e]
[ 0.065184] pnp 00:00: [io 0x002f]
[ 0.065230] pnp 00:00: Plug and Play BIOS device, IDs PNP0a03 (active)
[ 0.065240] pnp 00:01: [mem 0x00000000-0x0009fbff]
[ 0.065244] pnp 00:01: [mem 0x0009fc00-0x0009ffff]
[ 0.065247] pnp 00:01: [mem 0x000f0000-0x000fffff]
[ 0.065250] pnp 00:01: [mem 0x00100000-0x3fffffff]
[ 0.065254] pnp 00:01: [mem 0xffffffffffee0000-0xfffffffffff0fffe]
[ 0.065257] pnp 00:01: [mem 0xfffffffffec00000-0xfffffffffecfffff]
[ 0.065260] pnp 00:01: [mem 0xfffffffffee00000-0xfffffffffeefffff]
[ 0.065263] pnp 00:01: [mem 0xfffffffffffc0000-0xffffffffffffffff]
[ 0.065339] system 00:01: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.065399] system 00:01: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.065457] system 00:01: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.065515] system 00:01: [mem 0x00100000-0x3fffffff] could not be reserved
[ 0.065573] system 00:01: [mem 0xffffffffffee0000-0xfffffffffff0fffe] could not be reserved
[ 0.065641] system 00:01: [mem 0xfffffffffec00000-0xfffffffffecfffff] could not be reserved
[ 0.065710] system 00:01: [mem 0xfffffffffee00000-0xfffffffffeefffff] could not be reserved
[ 0.065778] system 00:01: [mem 0xfffffffffffc0000-0xffffffffffffffff] could not be reserved
[ 0.065848] system 00:01: Plug and Play BIOS device, IDs PNP0c01 (active)
[ 0.065857] pnp 00:02: [io 0x0020-0x0021]
[ 0.065860] pnp 00:02: [io 0x00a0-0x00a1]
[ 0.065864] pnp 00:02: [irq 2]
[ 0.065898] pnp 00:02: Plug and Play BIOS device, IDs PNP0000 (active)
[ 0.065905] pnp 00:03: [dma 4]
[ 0.065908] pnp 00:03: [io 0x0000-0x000f]
[ 0.065911] pnp 00:03: [io 0x0080-0x0090]
[ 0.065914] pnp 00:03: [io 0x0094-0x009f]
[ 0.065916] pnp 00:03: [io 0x00c0-0x00de]
[ 0.065949] pnp 00:03: Plug and Play BIOS device, IDs PNP0200 (active)
[ 0.065957] pnp 00:04: [irq 0]
[ 0.065960] pnp 00:04: [io 0x0040-0x0043]
[ 0.065997] pnp 00:04: Plug and Play BIOS device, IDs PNP0100 (active)
[ 0.066006] pnp 00:05: [irq 8]
[ 0.066009] pnp 00:05: [io 0x0070-0x0071]
[ 0.066042] pnp 00:05: Plug and Play BIOS device, IDs PNP0b00 (active)
[ 0.066049] pnp 00:06: [irq 1]
[ 0.066052] pnp 00:06: [io 0x0060]
[ 0.066054] pnp 00:06: [io 0x0064]
[ 0.066087] pnp 00:06: Plug and Play BIOS device, IDs PNP0303 (active)
[ 0.066094] pnp 00:07: [io 0x0061]
[ 0.066129] pnp 00:07: Plug and Play BIOS device, IDs PNP0800 (active)
[ 0.066136] pnp 00:08: [irq 13]
[ 0.066140] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.066173] pnp 00:08: Plug and Play BIOS device, IDs PNP0c04 (active)
[ 0.066209] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.066212] pnp 00:09: [irq 4]
[ 0.066275] pnp 00:09: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.066310] pnp 00:0a: [io 0x02f8-0x02ff]
[ 0.066313] pnp 00:0a: [irq 3]
[ 0.066372] pnp 00:0a: Plug and Play BIOS device, IDs PNP0501 (active)
[ 0.066445] pnp 00:0b: [io 0x0378-0x037f]
[ 0.066448] pnp 00:0b: [io 0x0778-0x077a]
[ 0.066451] pnp 00:0b: [irq 7]
[ 0.066454] pnp 00:0b: [dma 3]
[ 0.066519] pnp 00:0b: Plug and Play BIOS device, IDs PNP0401 (active)
[ 0.066561] pnp 00:0c: [io 0x0330-0x0331]
[ 0.066564] pnp 00:0c: [irq 5]
[ 0.066624] pnp 00:0c: Plug and Play BIOS device, IDs PNPb006 (active)
[ 0.066653] pnp 00:0d: [io 0x0200-0x0207]
[ 0.066694] pnp 00:0d: Plug and Play BIOS device, IDs PNPb02f (active)
[ 0.066715] pnp 00:0e: [io 0x03f0-0x03f5]
[ 0.066718] pnp 00:0e: [irq 6]
[ 0.066721] pnp 00:0e: [dma 2]
[ 0.066763] pnp 00:0e: Plug and Play BIOS device, IDs PNP0700 (active)
[ 0.066766] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver
[ 0.071723] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.071796] pci 0000:00:01.0: bridge window [mem 0xdde00000-0xdfefffff]
[ 0.071856] pci 0000:00:01.0: bridge window [mem 0xd5b00000-0xddcfffff pref]
[ 0.071930] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.071933] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.071937] pci_bus 0000:01: resource 1 [mem 0xdde00000-0xdfefffff]
[ 0.071940] pci_bus 0000:01: resource 2 [mem 0xd5b00000-0xddcfffff pref]
[ 0.072031] NET: Registered protocol family 2
[ 0.072503] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.072593] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.072697] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.072836] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.072904] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.073052] NET: Registered protocol family 1
[ 0.073156] PCI: setting IRQ 10 as level-triggered
[ 0.073163] pci 0000:00:02.2: found PCI INT D -> IRQ 10
[ 0.156393] PCI: setting IRQ 11 as level-triggered
[ 0.156398] pci 0000:00:02.3: found PCI INT A -> IRQ 11
[ 0.240410] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.240481] PCI: CLS 32 bytes, default 64
[ 0.240605] Unpacking initramfs...
[ 1.000095] Freeing initrd memory: 18308K
[ 1.001097] audit: initializing netlink subsys (disabled)
[ 1.001810] audit: type=2000 audit(1511798737.001:1): state=initialized audit_enabled=0 res=1
[ 1.001913] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.002001] zbud: loaded
[ 4.308719] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cd499d9cdd, max_idle_ns: 440795234042 ns
[ 4.308818] clocksource: Switched to clocksource tsc
[ 4.310295] Key type asymmetric registered
[ 4.310352] Asymmetric key parser 'x509' registered
[ 4.310434] bounce: pool size: 64 pages
[ 4.310541] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 4.310676] io scheduler noop registered
[ 4.310731] io scheduler deadline registered
[ 4.310807] io scheduler cfq registered (default)
[ 4.310862] io scheduler mq-deadline registered
[ 4.311220] isapnp: Scanning for PnP cards...
[ 4.665175] isapnp: No Plug & Play device found
[ 4.665379] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.686031] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.706622] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 4.707241] Linux agpgart interface v0.103
[ 4.707447] agpgart-sis 0000:00:00.0: SiS chipset [1039/0645]
[ 4.711955] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe0000000
[ 4.712270] i8042: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
[ 4.712327] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.712694] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.712968] mousedev: PS/2 mouse device common for all mice
[ 4.713260] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.713343] rtc_cmos 00:05: alarms up to one day, 114 bytes nvram
[ 4.713437] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.713975] NET: Registered protocol family 10
[ 4.714494] Segment Routing with IPv6
[ 4.714581] mip6: Mobile IPv6
[ 4.714634] NET: Registered protocol family 17
[ 4.714690] mpls_gso: MPLS GSO support
[ 4.714990] microcode: sig=0xf27, pf=0x4, revision=0x37
[ 4.715137] microcode: Microcode Update Driver: v2.2.
[ 4.715144] Using IPI No-Shortcut mode
[ 4.715261] sched_clock: Marking stable (4712599735, 0)->(5717587344, -1004987609)
[ 4.715649] registered taskstats version 1
[ 4.715732] zswap: loaded using pool lzo/zbud
[ 4.715884] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.715943] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.716276] rtc_cmos 00:05: setting system clock to 2017-11-27 16:05:42 UTC (1511798742)
[ 4.716399] PM: Hibernation image not present or could not be loaded.
[ 4.718718] Freeing unused kernel memory: 800K
[ 4.718879] Write protecting the kernel text: 5960k
[ 4.719015] Write protecting the kernel read-only data: 1876k
[ 4.731797] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.895741] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
[ 4.914967] tulip: Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[ 4.915102] tulip 0000:00:07.0: found PCI INT A -> IRQ 11
[ 4.929521] SCSI subsystem initialized
[ 4.931472] usbcore: registered new interface driver usbfs
[ 4.931559] usbcore: registered new interface driver hub
[ 4.940414] usbcore: registered new device driver usb
[ 4.941933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.942890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.943471] ehci-pci: EHCI PCI platform driver
[ 4.943949] ohci-pci: OHCI PCI platform driver
[ 4.952355] tulip0: EEPROM default media type Autosense
[ 4.952423] tulip0: Index #0 - Media 10baseT (#0) described by a 21140 non-MII (0) block
[ 4.952490] tulip0: Index #1 - Media 100baseTx (#3) described by a 21140 non-MII (0) block
[ 4.952557] tulip0: Index #2 - Media 10baseT-FDX (#4) described by a 21140 non-MII (0) block
[ 4.952677] tulip0: Index #3 - Media 100baseTx-FDX (#5) described by a 21140 non-MII (0) block
[ 4.953414] tulip0: MII transceiver #1 config 3100 status 786b advertising 01e1
[ 4.964269] libata version 3.00 loaded.
[ 4.975532] net eth0: Digital DS21140 Tulip rev 34 at Port 0xd400, 00:00:e8:2c:66:f7, IRQ 11
[ 4.977234] ohci-pci 0000:00:02.2: found PCI INT D -> IRQ 10
[ 4.977360] ohci-pci 0000:00:02.2: OHCI PCI host controller
[ 4.977431] ohci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 4.977549] ohci-pci 0000:00:02.2: irq 10, io mem 0xdfffe000
[ 5.038813] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.038882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.038949] usb usb1: Product: OHCI PCI host controller
[ 5.039004] usb usb1: Manufacturer: Linux 4.13.0-1-686-pae ohci_hcd
[ 5.039059] usb usb1: SerialNumber: 0000:00:02.2
[ 5.040917] hub 1-0:1.0: USB hub found
[ 5.040996] hub 1-0:1.0: 3 ports detected
[ 5.041317] pata_sis 0000:00:02.5: version 0.5.2
[ 5.045082] scsi host0: pata_sis
[ 5.045638] scsi host1: pata_sis
[ 5.045809] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.045868] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.046381] ohci-pci 0000:00:02.3: found PCI INT A -> IRQ 11
[ 5.046502] ohci-pci 0000:00:02.3: OHCI PCI host controller
[ 5.046571] ohci-pci 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 5.046690] ohci-pci 0000:00:02.3: irq 11, io mem 0xdffff000
[ 5.106721] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.106788] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.106854] usb usb2: Product: OHCI PCI host controller
[ 5.106909] usb usb2: Manufacturer: Linux 4.13.0-1-686-pae ohci_hcd
[ 5.106964] usb usb2: SerialNumber: 0000:00:02.3
[ 5.107811] hub 2-0:1.0: USB hub found
[ 5.107887] hub 2-0:1.0: 3 ports detected
[ 5.213172] ata1.00: ATA-5: ST360021A, 3.19, max UDMA/100
[ 5.213240] ata1.00: 117231408 sectors, multi 16: LBA
[ 5.259796] ata1.01: ATA-7: ST3160815A, 3.AAC, max UDMA/100
[ 5.259854] ata1.01: 312581808 sectors, multi 16: LBA48
[ 5.268982] ata1.00: configured for UDMA/100
[ 5.326306] ata1.01: configured for UDMA/100
[ 5.326618] scsi 0:0:0:0: Direct-Access ATA ST360021A 3.19 PQ: 0 ANSI: 5
[ 5.327800] scsi 0:0:1:0: Direct-Access ATA ST3160815A C PQ: 0 ANSI: 5
[ 5.489210] ata2.00: ATAPI: LTN526, YH0X, max UDMA/33
[ 5.493044] ata2.00: configured for UDMA/33
[ 5.494334] scsi 1:0:0:0: CD-ROM LITEON CD-ROM LTN526 YH0X PQ: 0 ANSI: 5
[ 5.513221] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 5.513322] sd 0:0:0:0: [sda] Write Protect is off
[ 5.513378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.513418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.538320] sr 1:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 5.538400] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.539409] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.567318] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 5.567637] sd 0:0:1:0: [sdb] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 5.567729] sd 0:0:1:0: [sdb] Write Protect is off
[ 5.567786] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.567895] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.590772] sdb: sdb1 sdb2
[ 5.591087] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.592267] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 7.144625] PM: Starting manual resume from disk
[ 7.144707] PM: Hibernation image partition 8:17 present
[ 7.144708] PM: Looking for hibernation image.
[ 7.145151] PM: Image not found (code -22)
[ 7.145154] PM: Hibernation image not present or could not be loaded.
[ 7.261059] random: crng init done
[ 7.467225] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[ 7.480142] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 9.623434] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 9.967624] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.103591] systemd[1]: systemd 235 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 10.103988] systemd[1]: Detected architecture x86.
[ 10.151466] systemd[1]: Set hostname to <kukeseen>.
[ 13.963074] systemd[1]: Configuration file /etc/systemd/system/postfix.service.d/override.conf is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 14.002026] systemd[1]: Configuration file /lib/systemd/system/postfix@.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 14.388614] systemd[1]: Reached target System Time Synchronized.
[ 14.389589] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 14.390148] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 14.390959] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.391989] systemd[1]: Created slice System Slice.
[ 15.099864] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 15.214355] hidraw: raw HID events driver (C) Jiri Kosina
[ 15.403051] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 15.560498] RPC: Registered named UNIX socket transport module.
[ 15.560566] RPC: Registered udp transport module.
[ 15.560619] RPC: Registered tcp transport module.
[ 15.560671] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 16.179602] snd_intel8x0 0000:00:02.7: found PCI INT C -> IRQ 10
[ 16.221161] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 16.513728] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 59377 usecs (2856 samples)
[ 16.513811] snd_intel8x0 0000:00:02.7: clocking to 48000
[ 16.786023] w83627hf: w83627hf: Found W83697HF chip at 0x290
[ 16.786400] w83627hf w83627hf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 16.947302] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 17.167604] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.439269] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 17.439641] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 17.439967] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 19.275478] Adding 3911792k swap on /dev/sdb1. Priority:-1 extents:1 across:3911792k FS
[ 20.493860] Adding 996024k swap on /dev/sda2. Priority:-2 extents:1 across:996024k FS
[ 21.428234] EXT4-fs (sdb2): mounting ext3 file system using the ext4 subsystem
[ 21.491937] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 21.521470] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 21.930471] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 27.853686] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
[ 27.890942] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 36.310937] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 36.342233] NFSD: starting 90-second grace period (net dd81c7c0)
[ 36.608776] tulip 0000:00:07.0 eth0: tulip_stop_rxtx() failed (CSR5 0xfc660000 CSR6 0x32042202)
[ 36.608791] net eth0: Setting full-duplex based on MII#1 link partner capability of 45e1

dmesg from the P3 (UBSAN complains about p6 perf events still)

[ 0.000000] Linux version 4.14.0 (mroos@matrox) (gcc version 7.2.1 20171025 (Debian 7.2.0-12)) #117 PREEMPT Mon Nov 13 22:24:25 EET 2017
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001ffeffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000001fff0000-0x000000001fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] random: fast init done
[ 0.000000] Legacy DMI 2.3 present.
[ 0.000000] DMI: Packard Bell NEC 00000000000000000000000/i815 , BIOS 2.0Q 09/27/2001
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 020000000 mask FFFF80000 write-back
[ 0.000000] 2 base 020000000 mask FFFF80000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: PAT not supported by CPU.
[ 0.000000] total RAM covered: 512M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 1 lose cover RAM: 0G
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x01bed000, 0x01bedfff] PGTABLE
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FBE70 000014 (v00 AMI )
[ 0.000000] ACPI: RSDT 0x000000001FFE0000 000028 (v01 AMIINT AMIINT10 00000011 MSFT 0100000C)
[ 0.000000] ACPI: FACP 0x000000001FFE0030 000074 (v01 AMIINT AMIINT10 00000011 MSFT 0100000C)
[ 0.000000] ACPI: DSDT 0x000000001FFE00B0 00317F (v01 INTEL SOLANO 00001004 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0x000000001FFE8000 000040
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1ffe0000
[ 0.000000] low ram: 0 - 1ffe0000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x000000001ffdffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffdffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[ 0.000000] On node 0 totalpages: 130942
[ 0.000000] free_area_init_node: node 0, pgdat c1b178e0, node_mem_map dfbe0020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 126944 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Local APIC disabled by BIOS -- reenabling.
[ 0.000000] Found and enabled local APIC!
[ 0.000000] e820: [mem 0x20000000-0xfff7ffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129918
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.0 root=/dev/sda1 ro lapic
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Memory: 506928K/523768K available (7291K kernel code, 2980K rwdata, 1100K rodata, 432K init, 304K bss, 16840K reserved, 0K cma-reserved)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
vmalloc : 0xe07e0000 - 0xfffa0000 ( 503 MB)
lowmem : 0xc0000000 - 0xdffe0000 ( 511 MB)
.init : 0xc1b2a000 - 0xc1b96000 ( 432 kB)
.data : 0xc171efc8 - 0xc1b1e120 (4092 kB)
.text : 0xc1000000 - 0xc171efc8 (7291 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] NR_IRQS: 2304, nr_irqs: 24, preallocated irqs: 16
[ 0.000000] CPU 0 irqstacks, hard=df408000 soft=df40a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1003.828 MHz processor
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2007.65 BogoMIPS (lpj=4015312)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170728
[ 0.012518] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.012674] ACPI: setting ELCR to 0200 (from 0a20)
[ 0.012906] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.013053] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.013771] mce: CPU supports 5 MCE banks
[ 0.013955] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[ 0.014088] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.014217] CPU: Intel Pentium III (Coppermine) (family: 0x6, model: 0x8, stepping: 0xa)
[ 0.016392] Performance Events: p6 PMU driver.
[ 0.016550] ================================================================================
[ 0.016797] UBSAN: Undefined behaviour in arch/x86/events/intel/p6.c:116:29
[ 0.016932] index 8 is out of range for type 'u64 [8]'
[ 0.017067] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.0 #117
[ 0.017201] Hardware name: Packard Bell NEC 00000000000000000000000/i815 , BIOS 2.0Q 09/27/2001
[ 0.017454] Call Trace:
[ 0.017601] dump_stack+0x16/0x21
[ 0.017743] ubsan_epilogue+0xe/0x40
[ 0.017876] __ubsan_handle_out_of_bounds+0x75/0x90
[ 0.018012] ? vprintk_default+0x2f/0x40
[ 0.018147] ? p4_pmu_schedule_events+0x490/0x490
[ 0.018278] p6_pmu_event_map+0x3b/0x50
[ 0.018418] init_hw_perf_events+0x50c/0x765
[ 0.018552] ? merge_attr+0x1e2/0x1e2
[ 0.018683] do_one_initcall+0x44/0x1d0
[ 0.018826] ? proc_register+0x14c/0x1e0
[ 0.018959] ? proc_create_data+0x5e/0xb0
[ 0.019092] ? proc_create+0x1b/0x30
[ 0.019224] kernel_init_freeable+0x6f/0x247
[ 0.019362] ? rest_init+0xa0/0xa0
[ 0.019492] ? rest_init+0xa0/0xa0
[ 0.019622] kernel_init+0xc/0x120
[ 0.019752] ? schedule_tail_wrapper+0x9/0xc
[ 0.019884] ? rest_init+0xa0/0xa0
[ 0.020000] ret_from_fork+0x19/0x24
[ 0.020000] ================================================================================
[ 0.020020] ================================================================================
[ 0.020267] UBSAN: Undefined behaviour in arch/x86/events/intel/p6.c:116:29
[ 0.020402] load of address c1722da0 with insufficient space
[ 0.020533] for an object of type 'const u64'
[ 0.020663] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.0 #117
[ 0.020796] Hardware name: Packard Bell NEC 00000000000000000000000/i815 , BIOS 2.0Q 09/27/2001
[ 0.021048] Call Trace:
[ 0.021177] dump_stack+0x16/0x21
[ 0.021309] ubsan_epilogue+0xe/0x40
[ 0.021441] __ubsan_handle_type_mismatch+0x96/0x170
[ 0.021575] ? p4_pmu_schedule_events+0x490/0x490
[ 0.021707] p6_pmu_event_map+0x4b/0x50
[ 0.021840] init_hw_perf_events+0x50c/0x765
[ 0.021974] ? merge_attr+0x1e2/0x1e2
[ 0.022106] do_one_initcall+0x44/0x1d0
[ 0.022238] ? proc_register+0x14c/0x1e0
[ 0.022370] ? proc_create_data+0x5e/0xb0
[ 0.022502] ? proc_create+0x1b/0x30
[ 0.022633] kernel_init_freeable+0x6f/0x247
[ 0.022763] ? rest_init+0xa0/0xa0
[ 0.022893] ? rest_init+0xa0/0xa0
[ 0.023022] kernel_init+0xc/0x120
[ 0.023152] ? schedule_tail_wrapper+0x9/0xc
[ 0.023283] ? rest_init+0xa0/0xa0
[ 0.023412] ret_from_fork+0x19/0x24
[ 0.023542] ================================================================================
[ 0.024012] ... version: 0
[ 0.024142] ... bit width: 32
[ 0.024270] ... generic registers: 2
[ 0.024398] ... value mask: 00000000ffffffff
[ 0.024529] ... max period: 000000007fffffff
[ 0.024659] ... fixed-purpose events: 0
[ 0.024787] ... event mask: 0000000000000003
[ 0.025117] Hierarchical SRCU implementation.
[ 0.025635] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.028000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.028000] devtmpfs: initialized
[ 0.028000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.028000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.028000] NET: Registered protocol family 16
[ 0.028000] cpuidle: using governor ladder
[ 0.028000] cpuidle: using governor menu
[ 0.028000] ACPI: bus type PCI registered
[ 0.034034] PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=2
[ 0.034178] PCI: Using configuration type 1 for base access
[ 0.051547] ACPI: Added _OSI(Module Device)
[ 0.051695] ACPI: Added _OSI(Processor Device)
[ 0.051827] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.051959] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.061250] ACPI: Interpreter enabled
[ 0.061415] ACPI: (supports S0 S5)
[ 0.061539] ACPI: Using PIC for interrupt routing
[ 0.061829] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.062776] ACPI: Enabled 4 GPEs in block 00 to 0F
[ 0.062922] ACPI: Enabled 1 GPEs in block 10 to 1F
[ 0.079566] ACPI: Power Resource [URP1] (off)
[ 0.080053] ACPI: Power Resource [URP2] (off)
[ 0.080411] ACPI: Power Resource [FDDP] (off)
[ 0.080731] ACPI: Power Resource [LPTP] (off)
[ 0.090566] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.090723] acpi PNP0A03:00: _OSC: OS supports [Segments]
[ 0.090863] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.091000] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.091608] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
[ 0.091614] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
[ 0.091620] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
[ 0.091626] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[ 0.091631] acpi PNP0A03:00: host bridge window [mem 0x000cb000-0x000dffff window] (ignored)
[ 0.091637] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff window] (ignored)
[ 0.091640] PCI: root bus 00: using default resources
[ 0.092161] PCI host bridge to bus 0000:00
[ 0.092312] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.092449] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.092587] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.092747] pci 0000:00:00.0: [8086:1130] type 00 class 0x060000
[ 0.092777] pci 0000:00:00.0: reg 0x10: [mem 0xe8000000-0xebffffff pref]
[ 0.093150] pci 0000:00:01.0: [8086:1131] type 01 class 0x060400
[ 0.093416] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[ 0.093680] pci 0000:00:1f.0: [8086:2440] type 00 class 0x060100
[ 0.093776] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.094033] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
[ 0.096502] pci 0000:00:1f.1: [8086:244b] type 00 class 0x010180
[ 0.096566] pci 0000:00:1f.1: reg 0x20: [io 0xff00-0xff0f]
[ 0.096591] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.096738] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.096875] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.097012] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.097372] pci 0000:00:1f.2: [8086:2442] type 00 class 0x0c0300
[ 0.097433] pci 0000:00:1f.2: reg 0x20: [io 0xd000-0xd01f]
[ 0.097662] pci 0000:00:1f.3: [8086:2443] type 00 class 0x0c0500
[ 0.097720] pci 0000:00:1f.3: reg 0x20: [io 0x0540-0x054f]
[ 0.097932] pci 0000:00:1f.4: [8086:2444] type 00 class 0x0c0300
[ 0.097991] pci 0000:00:1f.4: reg 0x20: [io 0xd400-0xd41f]
[ 0.098225] pci 0000:00:1f.5: [8086:2445] type 00 class 0x040100
[ 0.098253] pci 0000:00:1f.5: reg 0x10: [io 0xdc00-0xdcff]
[ 0.098267] pci 0000:00:1f.5: reg 0x14: [io 0xd800-0xd83f]
[ 0.098608] pci 0000:01:00.0: [102b:2527] type 00 class 0x030000
[ 0.098640] pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe5ffffff pref]
[ 0.098652] pci 0000:01:00.0: reg 0x14: [mem 0xef9fc000-0xef9fffff]
[ 0.098664] pci 0000:01:00.0: reg 0x18: [mem 0xef000000-0xef7fffff]
[ 0.098694] pci 0000:01:00.0: reg 0x30: [mem 0xef9c0000-0xef9dffff pref]
[ 0.100546] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.100699] pci 0000:00:01.0: bridge window [mem 0xee900000-0xef9fffff]
[ 0.100707] pci 0000:00:01.0: bridge window [mem 0xe2600000-0xe66fffff pref]
[ 0.100834] pci 0000:02:01.0: [8086:1229] type 00 class 0x020000
[ 0.100867] pci 0000:02:01.0: reg 0x10: [mem 0xefeff000-0xefefffff]
[ 0.100881] pci 0000:02:01.0: reg 0x14: [io 0xac00-0xac3f]
[ 0.100894] pci 0000:02:01.0: reg 0x18: [mem 0xefd00000-0xefdfffff]
[ 0.100929] pci 0000:02:01.0: reg 0x30: [mem 0xfff00000-0xffffffff pref]
[ 0.100980] pci 0000:02:01.0: supports D1 D2
[ 0.100985] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101140] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.101286] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.101295] pci 0000:00:1e.0: bridge window [mem 0xefa00000-0xefefffff]
[ 0.101303] pci 0000:00:1e.0: bridge window [mem 0xe6700000-0xe67fffff pref]
[ 0.101310] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.101316] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.101334] pci_bus 0000:00: on NUMA node 0
[ 0.105021] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.105497] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.105959] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.106431] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.106898] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.107370] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.107837] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.108324] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.109523] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.109678] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.109928] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.110061] vgaarb: loaded
[ 0.110523] SCSI subsystem initialized
[ 0.111176] libata version 3.00 loaded.
[ 0.111478] PCI: Using ACPI for IRQ routing
[ 0.111634] PCI: pci_cache_line_size set to 32 bytes
[ 0.111692] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.111698] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[ 0.113007] clocksource: Switched to clocksource refined-jiffies
[ 0.113489] pnp: PnP ACPI init
[ 0.114369] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.114741] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.115128] pnp 00:02: [dma 2]
[ 0.115525] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.116865] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.117850] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.119199] pnp 00:05: [dma 3]
[ 0.119619] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.120723] pnp 00:06: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.121592] pnp 00:07: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.122259] pnp: PnP ACPI: found 8 devices
[ 0.169656] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.169936] clocksource: Switched to clocksource acpi_pm
[ 0.170097] pci 0000:02:01.0: can't claim BAR 6 [mem 0xfff00000-0xffffffff pref]: address conflict with Reserved [mem 0xfff80000-0xffffffff]
[ 0.170389] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.170531] pci 0000:00:01.0: bridge window [mem 0xee900000-0xef9fffff]
[ 0.170671] pci 0000:00:01.0: bridge window [mem 0xe2600000-0xe66fffff pref]
[ 0.170931] pci 0000:02:01.0: BAR 6: assigned [mem 0xe6700000-0xe67fffff pref]
[ 0.171176] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.171311] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.171450] pci 0000:00:1e.0: bridge window [mem 0xefa00000-0xefefffff]
[ 0.171589] pci 0000:00:1e.0: bridge window [mem 0xe6700000-0xe67fffff pref]
[ 0.171842] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.171848] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.171854] pci_bus 0000:01: resource 1 [mem 0xee900000-0xef9fffff]
[ 0.171860] pci_bus 0000:01: resource 2 [mem 0xe2600000-0xe66fffff pref]
[ 0.171866] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.171872] pci_bus 0000:02: resource 1 [mem 0xefa00000-0xefefffff]
[ 0.171878] pci_bus 0000:02: resource 2 [mem 0xe6700000-0xe67fffff pref]
[ 0.171883] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.171888] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.171888] NET: Registered protocol family 2
[ 0.171888] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.171888] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.171888] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.171888] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.171888] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.171987] NET: Registered protocol family 1
[ 0.172731] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.172872] PCI: setting IRQ 9 as level-triggered
[ 0.173274] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
[ 0.173529] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.173794] pci 0000:02:01.0: Firmware left e100 interrupts enabled; disabling
[ 0.174031] PCI: CLS 32 bytes, default 32
[ 0.176257] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.179295] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.179557] io scheduler noop registered
[ 0.179741] io scheduler cfq registered (default)
[ 0.180464] Serial: 8250/16550 driver, 16 ports, IRQ sharing disabled
[ 0.201299] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.222345] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.225781] Non-volatile memory driver v1.3
[ 0.225936] Linux agpgart interface v0.103
[ 0.226155] agpgart-intel 0000:00:00.0: Intel i815 Chipset
[ 0.231696] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 0.232096] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[ 0.232809] Floppy drive(s): fd0 is 1.44M
[ 0.233189] ata_piix 0000:00:1f.1: version 2.13
[ 0.237903] scsi host0: ata_piix
[ 0.238492] scsi host1: ata_piix
[ 0.238753] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 0.238892] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 0.239139] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.239275] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.239971] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
[ 0.240673] PCI: setting IRQ 11 as level-triggered
[ 0.255563] FDC 0 is a post-1991 82077
[ 0.267686] e100 0000:02:01.0 eth0: addr 0xefeff000, irq 11, MAC addr 00:02:b3:09:1e:59
[ 0.268371] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.268514] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.269859] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.270716] mousedev: PS/2 mouse device common for all mice
[ 0.271388] rtc_cmos 00:00: RTC can wake from S4
[ 0.272314] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 0.272502] rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
[ 0.272885] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.274142] NET: Registered protocol family 10
[ 0.275782] Segment Routing with IPv6
[ 0.275990] NET: Registered protocol family 17
[ 0.276471] Key type dns_resolver registered
[ 0.277125] microcode: sig=0x68a, pf=0x10, revision=0x1
[ 0.277438] microcode: Microcode Update Driver: v2.2.
[ 0.277450] Using IPI Shortcut mode
[ 0.277727] sched_clock: Marking stable (276158586, 0)->(429726569, -153567983)
[ 0.279175] Key type encrypted registered
[ 0.279730] console [netcon0] enabled
[ 0.279862] netconsole: network logging started
[ 0.280296] rtc_cmos 00:00: setting system clock to 2017-11-30 15:13:15 UTC (1512054795)
[ 0.292387] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.404458] ata2.00: ATAPI: CDU5211, YYS2, max UDMA/33, CDB intr
[ 0.407119] ata2.00: configured for UDMA/33
[ 0.448501] ata1.00: ATA-7: ST380215A, 3.AAD, max UDMA/100
[ 0.448638] ata1.00: 156301488 sectors, multi 16: LBA48
[ 0.523353] ata1.00: configured for UDMA/100
[ 0.523807] scsi 0:0:0:0: Direct-Access ATA ST380215A D PQ: 0 ANSI: 5
[ 0.525048] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 0.525349] sd 0:0:0:0: [sda] Write Protect is off
[ 0.525485] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.525546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.526557] scsi 1:0:0:0: CD-ROM SONY CDU5211 YYS2 PQ: 0 ANSI: 5
[ 0.594078] sda: sda1 sda2 < sda5 >
[ 0.595392] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.617455] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 0.618157] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 0.648202] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.648519] VFS: Mounted root (ext4 filesystem) readonly on device 259:524288.
[ 0.691192] devtmpfs: mounted
[ 0.692704] Freeing unused kernel memory: 432K
[ 0.693083] Write protecting the kernel text: 7292k
[ 0.693269] Write protecting the kernel read-only data: 1112k
[ 1.184123] tsc: Refined TSC clocksource calibration: 1003.910 MHz
[ 1.184285] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe7884ac595, max_idle_ns: 440795203728 ns
[ 2.210163] clocksource: Switched to clocksource tsc
[ 3.571292] tsc: Marking TSC unstable due to TSC halts in idle
[ 3.571577] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 3.571828] sched_clock: Marking unstable (3571496396, 78132)<-(3725142629, -153567983)
[ 3.576223] clocksource: Switched to clocksource acpi_pm
[ 3.635363] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.635639] ACPI: Power Button [PWRB]
[ 3.636005] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 3.636343] ACPI: Sleep Button [SLPB]
[ 3.636632] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.636880] ACPI: Power Button [PWRF]
[ 3.749183] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 3.749340] PCI: setting IRQ 5 as level-triggered
[ 3.749378] i801_smbus 0000:00:1f.3: SMBus using polling
[ 3.832593] intel_rng: FWH not detected
[ 3.845830] ACPI: bus type USB registered
[ 3.846066] usbcore: registered new interface driver usbfs
[ 3.846232] usbcore: registered new interface driver hub
[ 3.856297] usbcore: registered new device driver usb
[ 3.871548] gameport gameport0: NS558 PnP Gameport is pnp00:06/gameport0, io 0x201, speed 988kHz
[ 3.877041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.887123] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.887531] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 3.896950] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 3.897272] uhci_hcd 0000:00:1f.2: irq 9, io base 0x0000d000
[ 3.900333] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.900502] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.900762] usb usb1: Product: UHCI Host Controller
[ 3.904257] usb usb1: Manufacturer: Linux 4.14.0 uhci_hcd
[ 3.904411] usb usb1: SerialNumber: 0000:00:1f.2
[ 3.907330] hub 1-0:1.0: USB hub found
[ 3.907502] hub 1-0:1.0: 2 ports detected
[ 3.908311] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 3.908476] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 3.908768] uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000d400
[ 3.912322] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.912477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.912722] usb usb2: Product: UHCI Host Controller
[ 3.912854] usb usb2: Manufacturer: Linux 4.14.0 uhci_hcd
[ 3.912988] usb usb2: SerialNumber: 0000:00:1f.4
[ 3.913533] hub 2-0:1.0: USB hub found
[ 3.914125] hub 2-0:1.0: 2 ports detected
[ 3.954612] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.955207] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.961558] IT8712 SuperIO detected.
[ 3.961932] parport_pc 00:05: reported by Plug and Play ACPI
[ 3.962196] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 4.020542] sr 1:0:0:0: [sr0] scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 4.020810] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.021343] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 4.026326] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.026478] ACPI: Thermal Zone [THRM] (42 C)
[ 4.076547] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.091434] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.404160] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 57998 usecs (2786 samples)
[ 4.404428] snd_intel8x0 0000:00:1f.5: clocking to 48000
[ 4.464318] random: crng init done
[ 5.988032] Adding 1005564k swap on /dev/sda5. Priority:-2 extents:1 across:1005564k
[ 6.107475] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 6.347980] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.426761] loop: module loaded
[ 7.501739] it87: Found IT8712F chip at 0x290, revision 4
[ 7.501918] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\HWMI) (20170728/utaddress-247)
[ 7.502277] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_TZ.I712) (20170728/utaddress-247)
[ 7.502634] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000295-0x0000000000000296 (\_SB.PCI0.SBRG.HWMT) (20170728/utaddress-247)
[ 7.503000] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.300289] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.304421] e100 0000:02:01.0 eth0: NIC Link is Up 100 Mbps Full Duplex
[ 9.304747] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready


--
Meelis Roos (mroos@xxxxxxxx)