[tip:x86/pti] objtool: Allow alternatives to be ignored

[tip-bot for Josh Poimboeuf]

Commit-ID:  258c76059cece01bebae098e81bacb1af2edad17
Gitweb:     https://git.kernel.org/tip/258c76059cece01bebae098e81bacb1af2edad17
Author:     Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
AuthorDate: Thu, 11 Jan 2018 21:46:24 +0000
Committer:  Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitDate: Fri, 12 Jan 2018 00:14:28 +0100

objtool: Allow alternatives to be ignored

Getting objtool to understand retpolines is going to be a bit of a
challenge.  For now, take advantage of the fact that retpolines are
patched in with alternatives.  Just read the original (sane)
non-alternative instruction, and ignore the patched-in retpoline.

This allows objtool to understand the control flow *around* the
retpoline, even if it can't yet follow what's inside.  This means the
ORC unwinder will fail to unwind from inside a retpoline, but will work
fine otherwise.

Signed-off-by: Josh Poimboeuf <jpoimboe@xxxxxxxxxx>
Signed-off-by: David Woodhouse <dwmw@xxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: gnomes@xxxxxxxxxxxxxxxxxxx
Cc: Rik van Riel <riel@xxxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Cc: thomas.lendacky@xxxxxxx
Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Cc: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
Cc: Jiri Kosina <jikos@xxxxxxxxxx>
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Dave Hansen <dave.hansen@xxxxxxxxx>
Cc: Kees Cook <keescook@xxxxxxxxxx>
Cc: Tim Chen <tim.c.chen@xxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxxx>
Cc: Paul Turner <pjt@xxxxxxxxxx>
Link: https://lkml.kernel.org/r/1515707194-20531-3-git-send-email-dwmw@xxxxxxxxxxxx

---
 tools/objtool/check.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++-----
 tools/objtool/check.h |  2 +-
 2 files changed, 57 insertions(+), 7 deletions(-)

diff --git a/tools/objtool/check.c b/tools/objtool/check.c
index de053fb..f40d46e 100644
--- a/tools/objtool/check.c
+++ b/tools/objtool/check.c
@@ -428,6 +428,40 @@ static void add_ignores(struct objtool_file *file)
 }
 
 /*
+ * FIXME: For now, just ignore any alternatives which add retpolines.  This is
+ * a temporary hack, as it doesn't allow ORC to unwind from inside a retpoline.
+ * But it at least allows objtool to understand the control flow *around* the
+ * retpoline.
+ */
+static int add_nospec_ignores(struct objtool_file *file)
+{
+	struct section *sec;
+	struct rela *rela;
+	struct instruction *insn;
+
+	sec = find_section_by_name(file->elf, ".rela.discard.nospec");
+	if (!sec)
+		return 0;
+
+	list_for_each_entry(rela, &sec->rela_list, list) {
+		if (rela->sym->type != STT_SECTION) {
+			WARN("unexpected relocation symbol type in %s", sec->name);
+			return -1;
+		}
+
+		insn = find_insn(file, rela->sym->sec, rela->addend);
+		if (!insn) {
+			WARN("bad .discard.nospec entry");
+			return -1;
+		}
+
+		insn->ignore_alts = true;
+	}
+
+	return 0;
+}
+
+/*
  * Find the destination instructions for all jumps.
  */
 static int add_jump_destinations(struct objtool_file *file)
@@ -509,11 +543,18 @@ static int add_call_destinations(struct objtool_file *file)
 			dest_off = insn->offset + insn->len + insn->immediate;
 			insn->call_dest = find_symbol_by_offset(insn->sec,
 								dest_off);
+			/*
+			 * FIXME: Thanks to retpolines, it's now considered
+			 * normal for a function to call within itself.  So
+			 * disable this warning for now.
+			 */
+#if 0
 			if (!insn->call_dest) {
 				WARN_FUNC("can't find call dest symbol at offset 0x%lx",
 					  insn->sec, insn->offset, dest_off);
 				return -1;
 			}
+#endif
 		} else if (rela->sym->type == STT_SECTION) {
 			insn->call_dest = find_symbol_by_offset(rela->sym->sec,
 								rela->addend+4);
@@ -678,12 +719,6 @@ static int add_special_section_alts(struct objtool_file *file)
 		return ret;
 
 	list_for_each_entry_safe(special_alt, tmp, &special_alts, list) {
-		alt = malloc(sizeof(*alt));
-		if (!alt) {
-			WARN("malloc failed");
-			ret = -1;
-			goto out;
-		}
 
 		orig_insn = find_insn(file, special_alt->orig_sec,
 				      special_alt->orig_off);
@@ -694,6 +729,10 @@ static int add_special_section_alts(struct objtool_file *file)
 			goto out;
 		}
 
+		/* Ignore retpoline alternatives. */
+		if (orig_insn->ignore_alts)
+			continue;
+
 		new_insn = NULL;
 		if (!special_alt->group || special_alt->new_len) {
 			new_insn = find_insn(file, special_alt->new_sec,
@@ -719,6 +758,13 @@ static int add_special_section_alts(struct objtool_file *file)
 				goto out;
 		}
 
+		alt = malloc(sizeof(*alt));
+		if (!alt) {
+			WARN("malloc failed");
+			ret = -1;
+			goto out;
+		}
+
 		alt->insn = new_insn;
 		list_add_tail(&alt->list, &orig_insn->alts);
 
@@ -1035,6 +1081,10 @@ static int decode_sections(struct objtool_file *file)
 
 	add_ignores(file);
 
+	ret = add_nospec_ignores(file);
+	if (ret)
+		return ret;
+
 	ret = add_jump_destinations(file);
 	if (ret)
 		return ret;
diff --git a/tools/objtool/check.h b/tools/objtool/check.h
index 47d9ea7..dbadb30 100644
--- a/tools/objtool/check.h
+++ b/tools/objtool/check.h
@@ -44,7 +44,7 @@ struct instruction {
 	unsigned int len;
 	unsigned char type;
 	unsigned long immediate;
-	bool alt_group, visited, dead_end, ignore, hint, save, restore;
+	bool alt_group, visited, dead_end, ignore, hint, save, restore, ignore_alts;
 	struct symbol *call_dest;
 	struct instruction *jump_dest;
 	struct list_head alts;