[PATCH v2 13/43] drm/bridge: analogix_dp: Move enable video into config_video()

From: Thierry Escande
Date: Fri Jan 26 2018 - 08:23:31 EST


From: Lin Huang <hl@xxxxxxxxxxxxxx>

We need to enable video before analogix_dp_is_video_stream_on(), so
we can get the right video stream status.

Cc: åå ç <wzz@xxxxxxxxxxxxxx>
Cc: StÃphane Marchesin <marcheu@xxxxxxxxxxxx>
Signed-off-by: Lin Huang <hl@xxxxxxxxxxxxxx>
Signed-off-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Signed-off-by: Thierry Escande <thierry.escande@xxxxxxxxxxxxx>
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
---
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 49a05eac41c1..8ef9e31c6713 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -820,11 +820,10 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
if (analogix_dp_is_slave_video_stream_clock_on(dp) == 0)
break;
if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) {
- dev_err(dp->dev, "Timeout of video streamclk ok\n");
+ dev_err(dp->dev, "Timeout of slave video streamclk ok\n");
return -ETIMEDOUT;
}
-
- usleep_range(1, 2);
+ usleep_range(1000, 1001);
}

/* Set to use the register calculated M/N video */
@@ -839,6 +838,9 @@ static int analogix_dp_config_video(struct analogix_dp_device *dp)
/* Configure video slave mode */
analogix_dp_enable_video_master(dp, 0);

+ /* Enable video */
+ analogix_dp_start_video(dp);
+
timeout_loop = 0;

for (;;) {
@@ -952,9 +954,6 @@ static void analogix_dp_commit(struct analogix_dp_device *dp)
DRM_ERROR("failed to enable the panel\n");
}

- /* Enable video */
- analogix_dp_start_video(dp);
-
dp->psr_enable = analogix_dp_detect_sink_psr(dp);
if (dp->psr_enable)
analogix_dp_enable_sink_psr(dp);
--
2.14.1