[PATCH AUTOSEL for 4.14 090/110] wcn36xx: Fix dynamic power saving

From: Sasha Levin
Date: Sat Feb 03 2018 - 13:34:28 EST


From: Loic Poulain <loic.poulain@xxxxxxxxxx>

[ Upstream commit 0856655a25476d4431005e39d606e349050066b0 ]

Since driver does not report hardware dynamic power saving cap,
this is up to the mac80211 to manage power saving timeout and
state machine, using the ieee80211 config callback to report
PS changes. This patch enables/disables PS mode according to
the new configuration.

Remove old behaviour enabling PS mode in a static way, this make
the device unusable when power save is enabled since device is
forced to PS regardless RX/TX traffic.

Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/main.c | 23 ++++++++++++-----------
drivers/net/wireless/ath/wcn36xx/pmc.c | 6 ++++--
2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index b83f01d6e3dd..af37c19dbfd7 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -384,6 +384,18 @@ static int wcn36xx_config(struct ieee80211_hw *hw, u32 changed)
}
}

+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ list_for_each_entry(tmp, &wcn->vif_list, list) {
+ vif = wcn36xx_priv_to_vif(tmp);
+ if (hw->conf.flags & IEEE80211_CONF_PS) {
+ if (vif->bss_conf.ps) /* ps allowed ? */
+ wcn36xx_pmc_enter_bmps_state(wcn, vif);
+ } else {
+ wcn36xx_pmc_exit_bmps_state(wcn, vif);
+ }
+ }
+ }
+
mutex_unlock(&wcn->conf_mutex);

return 0;
@@ -747,17 +759,6 @@ static void wcn36xx_bss_info_changed(struct ieee80211_hw *hw,
vif_priv->dtim_period = bss_conf->dtim_period;
}

- if (changed & BSS_CHANGED_PS) {
- wcn36xx_dbg(WCN36XX_DBG_MAC,
- "mac bss PS set %d\n",
- bss_conf->ps);
- if (bss_conf->ps) {
- wcn36xx_pmc_enter_bmps_state(wcn, vif);
- } else {
- wcn36xx_pmc_exit_bmps_state(wcn, vif);
- }
- }
-
if (changed & BSS_CHANGED_BSSID) {
wcn36xx_dbg(WCN36XX_DBG_MAC, "mac bss changed_bssid %pM\n",
bss_conf->bssid);
diff --git a/drivers/net/wireless/ath/wcn36xx/pmc.c b/drivers/net/wireless/ath/wcn36xx/pmc.c
index 589fe5f70971..1976b80c235f 100644
--- a/drivers/net/wireless/ath/wcn36xx/pmc.c
+++ b/drivers/net/wireless/ath/wcn36xx/pmc.c
@@ -45,8 +45,10 @@ int wcn36xx_pmc_exit_bmps_state(struct wcn36xx *wcn,
struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);

if (WCN36XX_BMPS != vif_priv->pw_state) {
- wcn36xx_err("Not in BMPS mode, no need to exit from BMPS mode!\n");
- return -EINVAL;
+ /* Unbalanced call or last BMPS enter failed */
+ wcn36xx_dbg(WCN36XX_DBG_PMC,
+ "Not in BMPS mode, no need to exit\n");
+ return -EALREADY;
}
wcn36xx_smd_exit_bmps(wcn, vif);
vif_priv->pw_state = WCN36XX_FULL_POWER;
--
2.11.0