[PATCH v3 2/7] ARM: dts: imx6q-icore: Switch LVDS timings from panel-simple

From: Jagan Teki
Date: Sun Feb 04 2018 - 12:55:20 EST


Switch to use ampire,am-800480aytzqw-00h LVDS timings from
panel-simple instead hard coding the same in dts.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v3, v2:
- none

arch/arm/boot/dts/imx6q-icore.dts | 31 +++++++++++++++++--------------
arch/arm/boot/dts/imx6qdl-icore.dtsi | 2 +-
2 files changed, 18 insertions(+), 15 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
index 5613dd9..c8e464e 100644
--- a/arch/arm/boot/dts/imx6q-icore.dts
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -48,6 +48,17 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+ panel {
+ compatible = "ampire,am-800480aytzqw-00h";
+ backlight = <&backlight_lvds>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
};

&can1 {
@@ -71,22 +82,14 @@
status = "okay";

lvds-channel@0 {
- fsl,data-mapping = "spwg";
- fsl,data-width = <18>;
+ reg = <0>;
status = "okay";

- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <60000000>;
- hactive = <800>;
- vactive = <480>;
- hback-porch = <30>;
- hfront-porch = <30>;
- vback-porch = <5>;
- vfront-porch = <5>;
- hsync-len = <64>;
- vsync-len = <20>;
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
};
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index a1b469c..5fd9e00 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -49,7 +49,7 @@
reg = <0x10000000 0x80000000>;
};

- backlight {
+ backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&pwm3 0 100000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
--
2.7.4